mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
666c80d33f
The driver for the cellular modems serial interface was missing from the default device packages. The driver is required to interact with the modem using AT commands. Other devices with a 4G modem also ship with this package, thus let's add it to the default packages for the board. Signed-off-by: David Bauer <mail@david-bauer.net>
489 lines
14 KiB
Makefile
489 lines
14 KiB
Makefile
define Build/dongwon-header
|
|
head -c 4 $@ > $@.tmp
|
|
head -c 8 /dev/zero >> $@.tmp
|
|
tail -c +9 $@ >> $@.tmp
|
|
( \
|
|
header_crc="$$(head -c 68 $@.tmp | gzip -c | \
|
|
tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
|
|
printf "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
|
|
dd of=$@.tmp bs=4 count=1 seek=1 conv=notrunc \
|
|
)
|
|
mv $@.tmp $@
|
|
endef
|
|
|
|
define Build/meraki-header
|
|
-$(STAGING_DIR_HOST)/bin/mkmerakifw \
|
|
-B $(1) -s \
|
|
-i $@ \
|
|
-o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
# attention: only zlib compression is allowed for the boot fs
|
|
define Build/zyxel-buildkerneljffs
|
|
mkdir -p $@.tmp/boot
|
|
cp $@ $@.tmp/boot/vmlinux.lzma.uImage
|
|
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
|
|
--big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
|
|
-o $@ \
|
|
-d $@.tmp
|
|
rm -rf $@.tmp
|
|
endef
|
|
|
|
define Build/zyxel-factory
|
|
let \
|
|
maxsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \
|
|
let size="$$(stat -c%s $@)"; \
|
|
if [ $$size -lt $$maxsize ]; then \
|
|
$(STAGING_DIR_HOST)/bin/mkrasimage \
|
|
-b $(RAS_BOARD) \
|
|
-v $(RAS_VERSION) \
|
|
-r $@ \
|
|
-s $$maxsize \
|
|
-o $@.new \
|
|
-l 131072 \
|
|
&& mv $@.new $@ ; \
|
|
fi
|
|
endef
|
|
|
|
define Device/8dev_rambutan
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := 8devices
|
|
DEVICE_MODEL := Rambutan
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES := factory.bin sysupgrade.tar
|
|
IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-ubi
|
|
endef
|
|
TARGET_DEVICES += 8dev_rambutan
|
|
|
|
define Device/aerohive_hiveap-121
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Aerohive
|
|
DEVICE_MODEL := HiveAP 121
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 116m
|
|
KERNEL_SIZE := 5120k
|
|
UBINIZE_OPTS := -E 5
|
|
SUPPORTED_DEVICES += hiveap-121
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += aerohive_hiveap-121
|
|
|
|
define Device/domywifi_dw33d
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := DomyWifi
|
|
DEVICE_MODEL := DW33D
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport \
|
|
kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
KERNEL_SIZE := 5120k
|
|
IMAGE_SIZE := 98304k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += domywifi_dw33d
|
|
|
|
define Device/dongwon_dw02-412h
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := Dongwon T&I
|
|
DEVICE_MODEL := DW02-412H
|
|
DEVICE_ALT0_VENDOR := KT
|
|
DEVICE_ALT0_MODEL := GiGA WiFi home
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
KERNEL_SIZE := 8192k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL := $$(KERNEL) | dongwon-header
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/dongwon_dw02-412h-64m
|
|
$(Device/dongwon_dw02-412h)
|
|
DEVICE_VARIANT := (64M)
|
|
DEVICE_ALT0_VARIANT := (64M)
|
|
IMAGE_SIZE := 49152k
|
|
endef
|
|
TARGET_DEVICES += dongwon_dw02-412h-64m
|
|
|
|
define Device/dongwon_dw02-412h-128m
|
|
$(Device/dongwon_dw02-412h)
|
|
DEVICE_VARIANT := (128M)
|
|
DEVICE_ALT0_VARIANT := (128M)
|
|
IMAGE_SIZE := 114688k
|
|
endef
|
|
TARGET_DEVICES += dongwon_dw02-412h-128m
|
|
|
|
define Device/glinet_gl-ar300m-common-nand
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-AR300M
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 16000k
|
|
PAGESIZE := 2048
|
|
VID_HDR_OFFSET := 2048
|
|
endef
|
|
|
|
define Device/glinet_gl-ar300m-nand
|
|
$(Device/glinet_gl-ar300m-common-nand)
|
|
DEVICE_VARIANT := NAND
|
|
BLOCKSIZE := 128k
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
SUPPORTED_DEVICES += glinet,gl-ar300m-nor
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar300m-nand
|
|
|
|
define Device/glinet_gl-ar300m-nor
|
|
$(Device/glinet_gl-ar300m-common-nand)
|
|
DEVICE_VARIANT := NOR
|
|
SUPPORTED_DEVICES += glinet,gl-ar300m-nand gl-ar300m
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar300m-nor
|
|
|
|
define Device/glinet_gl-ar750s-common
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-AR750S
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 \
|
|
kmod-usb-storage block-mount
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
|
|
define Device/glinet_gl-ar750s-nor-nand
|
|
$(Device/glinet_gl-ar750s-common)
|
|
DEVICE_VARIANT := NOR/NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
SUPPORTED_DEVICES += glinet,gl-ar750s-nor
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar750s-nor-nand
|
|
|
|
define Device/glinet_gl-ar750s-nor
|
|
$(Device/glinet_gl-ar750s-common)
|
|
DEVICE_VARIANT := NOR
|
|
SUPPORTED_DEVICES += gl-ar750s glinet,gl-ar750s glinet,gl-ar750s-nor-nand
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar750s-nor
|
|
|
|
define Device/glinet_gl-e750
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-E750
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2
|
|
SUPPORTED_DEVICES += gl-e750
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 131072k
|
|
PAGESIZE := 2048
|
|
VID_HDR_OFFSET := 2048
|
|
BLOCKSIZE := 128k
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-e750
|
|
|
|
define Device/glinet_gl-xe300
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-XE300
|
|
DEVICE_PACKAGES := kmod-usb2 block-mount kmod-usb-serial-ch341 \
|
|
kmod-usb-serial-option kmod-usb-net-qmi-wwan uqmi
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 131072k
|
|
PAGESIZE := 2048
|
|
VID_HDR_OFFSET := 2048
|
|
BLOCKSIZE := 128k
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-xe300
|
|
|
|
define Device/glinet_gl-x1200-common
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-X1200
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct-htt kmod-usb2 \
|
|
kmod-usb-storage block-mount kmod-usb-net-qmi-wwan uqmi
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
|
|
define Device/glinet_gl-x1200-nor-nand
|
|
$(Device/glinet_gl-x1200-common)
|
|
DEVICE_VARIANT := NOR/NAND
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 131072k
|
|
PAGESIZE := 2048
|
|
VID_HDR_OFFSET := 2048
|
|
BLOCKSIZE := 128k
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-x1200-nor-nand
|
|
|
|
define Device/glinet_gl-x1200-nor
|
|
$(Device/glinet_gl-x1200-common)
|
|
DEVICE_VARIANT := NOR
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-x1200-nor
|
|
|
|
define Device/linksys_ea4500-v3
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA4500
|
|
DEVICE_VARIANT := v3
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 81920k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
LINKSYS_HWNAME := EA4500V3
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
|
|
UBINIZE_OPTS := -E 5
|
|
endef
|
|
TARGET_DEVICES += linksys_ea4500-v3
|
|
|
|
define Device/meraki_mr18
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := Meraki
|
|
DEVICE_MODEL := MR18
|
|
DEVICE_PACKAGES := kmod-leds-uleds kmod-spi-gpio nu801
|
|
KERNEL_SIZE := 8m
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
LOADER_TYPE := bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | meraki-header MR18
|
|
# Initramfs-build fails due to size issues
|
|
# KERNEL_INITRAMFS := $$(KERNEL)
|
|
KERNEL_INITRAMFS :=
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += meraki_mr18
|
|
|
|
# fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + '\0')
|
|
define Device/netgear_ath79_nand
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 25600k
|
|
KERNEL := kernel-bin | append-dtb | lzma | \
|
|
pad-offset $$(BLOCKSIZE) 129 | uImage lzma | pad-extra 1 | \
|
|
append-uImage-fakehdr filesystem $$(UIMAGE_MAGIC)
|
|
IMAGES := sysupgrade.bin factory.img
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | check-size | netgear-dni
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
UBINIZE_OPTS := -E 5
|
|
endef
|
|
|
|
define Device/netgear_pgzng1
|
|
SOC := ar9344
|
|
DEVICE_MODEL := PGZNG1
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_ALT0_MODEL := Pulse Gateway
|
|
DEVICE_ALT0_VENDOR := ADT
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-i2c-gpio \
|
|
kmod-leds-pca955x kmod-rtc-isl1208 kmod-spi-dev
|
|
KERNEL_SIZE := 5120k
|
|
IMAGE_SIZE := 83968k
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += netgear_pgzng1
|
|
|
|
define Device/netgear_r6100
|
|
SOC := ar9344
|
|
DEVICE_MODEL := R6100
|
|
UIMAGE_MAGIC := 0x36303030
|
|
NETGEAR_BOARD_ID := R6100
|
|
NETGEAR_HW_ID := 29764434+0+128+128+2x2+2x2
|
|
$(Device/netgear_ath79_nand)
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r6100
|
|
|
|
define Device/netgear_wndr3700-v4
|
|
SOC := ar9344
|
|
DEVICE_MODEL := WNDR3700
|
|
DEVICE_VARIANT := v4
|
|
UIMAGE_MAGIC := 0x33373033
|
|
NETGEAR_BOARD_ID := WNDR3700v4
|
|
NETGEAR_HW_ID := 29763948+128+128
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3700-v4
|
|
|
|
define Device/netgear_wndr4300
|
|
SOC := ar9344
|
|
DEVICE_MODEL := WNDR4300
|
|
UIMAGE_MAGIC := 0x33373033
|
|
NETGEAR_BOARD_ID := WNDR4300
|
|
NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4300
|
|
|
|
define Device/netgear_wndr4300sw
|
|
SOC := ar9344
|
|
DEVICE_MODEL := WNDR4300SW
|
|
UIMAGE_MAGIC := 0x33373033
|
|
NETGEAR_BOARD_ID := WNDR4300SW
|
|
NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4300sw
|
|
|
|
define Device/netgear_wndr4300tn
|
|
SOC := ar9344
|
|
DEVICE_MODEL := WNDR4300TN
|
|
UIMAGE_MAGIC := 0x33373033
|
|
NETGEAR_BOARD_ID := WNDR4300TN
|
|
NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4300tn
|
|
|
|
define Device/netgear_wndr4300-v2
|
|
SOC := qca9563
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
|
|
first reboot issue. Please reflash factory image with nmrp or tftp.
|
|
DEVICE_MODEL := WNDR4300
|
|
DEVICE_VARIANT := v2
|
|
UIMAGE_MAGIC := 0x27051956
|
|
NETGEAR_BOARD_ID := WNDR4500series
|
|
NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012175
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4300-v2
|
|
|
|
define Device/netgear_wndr4500-v3
|
|
SOC := qca9563
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
|
|
first reboot issue. Please reflash factory image with nmrp or tftp.
|
|
DEVICE_MODEL := WNDR4500
|
|
DEVICE_VARIANT := v3
|
|
UIMAGE_MAGIC := 0x27051956
|
|
NETGEAR_BOARD_ID := WNDR4500series
|
|
NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012173
|
|
$(Device/netgear_ath79_nand)
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr4500-v3
|
|
|
|
define Device/zte_mf28x_common
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := ZTE
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/zte_mf281
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF281
|
|
KERNEL_SIZE := 6144k
|
|
IMAGE_SIZE := 29696k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis \
|
|
kmod-usb-acm comgt-ncm
|
|
endef
|
|
TARGET_DEVICES += zte_mf281
|
|
|
|
define Device/zte_mf282
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF282
|
|
DEVICE_PACKAGES += ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan \
|
|
kmod-usb-serial-option uqmi
|
|
endef
|
|
TARGET_DEVICES += zte_mf282
|
|
|
|
define Device/zte_mf286
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF286
|
|
DEVICE_PACKAGES += ath10k-firmware-qca988x-ct ath10k-firmware-qca9888-ct \
|
|
kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
|
|
endef
|
|
TARGET_DEVICES += zte_mf286
|
|
|
|
define Device/zte_mf286a
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF286A
|
|
DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan \
|
|
kmod-usb-serial-option uqmi
|
|
endef
|
|
TARGET_DEVICES += zte_mf286a
|
|
|
|
define Device/zte_mf286r
|
|
$(Device/zte_mf28x_common)
|
|
DEVICE_MODEL := MF286R
|
|
DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis kmod-usb-acm \
|
|
comgt-ncm
|
|
endef
|
|
TARGET_DEVICES += zte_mf286r
|
|
|
|
define Device/zyxel_nbg6716
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NBG6716
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \
|
|
ath10k-firmware-qca988x-ct
|
|
RAS_BOARD := NBG6716
|
|
RAS_ROOTFS_SIZE := 29696k
|
|
RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)"
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
LOADER_TYPE := bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | uImage none | \
|
|
zyxel-buildkerneljffs | check-size 4096k
|
|
IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
|
|
IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | \
|
|
sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | \
|
|
pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
zyxel-factory
|
|
UBINIZE_OPTS := -E 5
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6716
|
|
|
|
define Device/zyxel_emg2926_q10a
|
|
$(Device/zyxel_nbg6716)
|
|
DEVICE_MODEL := EMG2926-Q10A
|
|
RAS_BOARD := AAVK-EMG2926Q10A
|
|
endef
|
|
TARGET_DEVICES += zyxel_emg2926_q10a
|