Robert Senderek e8f7597317 mediatek: filogic: add support for Cudy RE3000 v1 ... MT7981B /256MB /16MB SPI (XM25QH128C) AX 2.4Ghz AX 5Ghz 160Mhz wide 1Gbit LAN OEM: root@RE3000:~# ifconfig |grep HWaddr br-lan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 (label) br-wan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 eth0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 ra0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 ra2 Link encap:Ethernet HWaddr 82:XX:XX:28:XX:X0 rax0 Link encap:Ethernet HWaddr 82:XX:XX:38:XX:X0 rax2 Link encap:Ethernet HWaddr 82:XX:XX:58:XX:X0 OpenWrt root@OpenWrt:/# ifconfig |grep HW br-lan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 eth0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 phy0-ap0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 phy1-ap0 Link encap:Ethernet HWaddr 82:XX:XX:08:XX:X1 tftp Installation via u-boot: Connect TTL3.3V converter connector is under the radiator Set speed 115200 8 N 1 Interrupt boot process by holding down-arrow key during boot then >> 6. Load image >> 0 - TFTP client (Default) enter IP adresses and initramfs-kernel.bin write to flash via sysupgrade or gui Signed-off-by: Robert Senderek <robert.senderek@10g.pl>		2024-02-29 21:16:27 +01:00
..
filogic.mk	mediatek: filogic: add support for Cudy RE3000 v1	2024-02-29 21:16:27 +01:00
gen_scatterfile.sh	target: use SPDX license identifiers on scripts	2021-02-10 15:47:23 +01:00
Makefile	image: add additional fields to Netgear encrypted image	2023-07-01 14:42:11 +02:00
mt7622.mk	mediatek: re-enable mt7622-rfb1-ubi with changed partition layout	2024-02-28 09:59:43 +01:00
mt7623.mk	mediatek: mt7623: phase out uImage.FIT partition parser	2024-02-24 03:02:35 +00:00
mt7629.mk	mediatek: Add support for TP-Link EAP225v5	2023-11-12 17:39:52 +01:00