openwrt/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts

// SPDX-License-Identifier: GPL-2.0-or-later

#include "bcm6362.dtsi"

/ {
	model = "Huawei HG253s v2";
	compatible = "huawei,hg253s-v2", "brcm,bcm6362";

	aliases {
		led-boot = &led_phone_green;
		led-failsafe = &led_phone_green;
		led-upgrade = &led_phone_green;

		led-internet = &led_internet_green;
		led-usb = &led_usb_green;
		led-wireless = &led_wireless_green;
	};

	keys {
		compatible = "gpio-keys-polled";
		poll-interval = <100>;

		reset {
			label = "reset";
			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
			debounce-interval = <60>;
		};

		wlan {
			label = "wlan";
			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WLAN>;
			debounce-interval = <60>;
		};

		wps {
			label = "wps";
			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
			debounce-interval = <60>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_phone_green: led@28 {
			label = "green:phone";
			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
		};

		led_usb_green: led@30 {
			label = "green:usb";
			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
		};
	};
};

&ehci {
	status = "okay";
};

&ethernet {
	status = "okay";

	nvmem-cells = <&macaddr_cferom_6a0>;
	nvmem-cell-names = "mac-address";
};

&leds {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_leds>;

	led_internet_green: led@3 {
		reg = <3>;
		active-low;
		label = "green:internet";
	};

	led_wireless_green: led@5 {
		reg = <5>;
		active-low;
		label = "green:wifi";
	};
};

&lsspi {
	status = "okay";

	switch@0 {
		compatible = "brcm,bcm53125";
		reg = <0>;
		spi-max-frequency = <781000>;

		dsa,member = <1 0>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@1 {
				reg = <1>;
				label = "lan4";
			};

			port@2 {
				reg = <2>;
				label = "lan3";
			};

			port@3 {
				reg = <3>;
				label = "lan2";
			};

			port@4 {
				reg = <4>;
				label = "lan1";
			};

			port@8 {
				reg = <8>;

				phy-mode = "rgmii";
				ethernet = <&switch0port4>;

				fixed-link {
					speed = <1000>;
					full-duplex;
					asym-pause;
					pause;
				};
			};
		};
	};
};

&mdio_ext {
	phy24: ethernet-phy@18 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <24>;
	};
};

&nflash {
	status = "okay";

	nandcs@0 {
		compatible = "brcm,nandcs";
		reg = <0>;
		nand-ecc-step-size = <512>;
		nand-ecc-strength = <15>;
		nand-on-flash-bbt;
		brcm,nand-oob-sector-size = <64>;

		#address-cells = <1>;
		#size-cells = <1>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			cferom: partition@0 {
				label = "cferom";
				reg = <0x0000000 0x0020000>;
				read-only;
			};

			partition@20000 {
				compatible = "brcm,wfi";
				label = "wfi";
				reg = <0x0020000 0x7d80000>;
			};

			partition@7da0000 {
				label = "nvram";
				reg = <0x7da0000 0x160000>;
			};
		};
	};
};

&ohci {
	status = "okay";
};

&pinctrl {
	pinctrl_leds: leds {
		function = "led";
		pins = "gpio3", "gpio5";
	};
};

&switch0 {
	dsa,member = <0 0>;

	ports {
		switch0port4: port@4 {
			reg = <4>;
			label = "extsw";

			phy-mode = "rgmii";

			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};

		port@5 {
			reg = <5>;
			label = "wan";

			phy-handle = <&phy24>;
			phy-mode = "rgmii-txid";
		};
	};
};

&uart0 {
	status = "okay";
};

&usbh {
	status = "okay";
};

&cferom {
	compatible = "nvmem-cells";
	#address-cells = <1>;
	#size-cells = <1>;

	macaddr_cferom_6a0: macaddr@6a0 {
		reg = <0x6a0 0x6>;
	};
};