mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
3cfa465387
Use generic earlycon on Linux Kernel instead of initialization in platform setup. And also, drop bootargs with console= parameter from I-O DATA BSH-G24MB. It uses 115200bps as baud-rate, the same as default in rtl838x.dtsi. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
423 lines
8.2 KiB
Plaintext
423 lines
8.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "rtl839x.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
compatible = "tplink,sg2452p-v4", "realtek,rtl8393-soc";
|
|
model = "TP-Link SG2452P v4";
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x10000000>;
|
|
};
|
|
|
|
aliases {
|
|
led-boot = &led_sys;
|
|
led-failsafe = &led_sys;
|
|
led-running = &led_sys;
|
|
led-upgrade = &led_sys;
|
|
label-mac-device = ðernet0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:38400n8";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
speed {
|
|
label = "speed";
|
|
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
};
|
|
};
|
|
|
|
gpio_fan_sys {
|
|
compatible = "gpio-fan";
|
|
alarm-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
gpio_fan_psu_1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&disable_jtag>;
|
|
compatible = "gpio-fan";
|
|
|
|
alarm-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
|
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
|
/* the actual speeds (rpm) are unknown, just use dummy values */
|
|
gpio-fan,speed-map = <1 0>, <2 1>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
gpio_fan_psu_2 {
|
|
/* This fan runs in parallel to PSU1 fan, but has a separate
|
|
* alarm GPIO. This is not (yet) supported by the gpio-fan driver,
|
|
* so a separate instance is added
|
|
*/
|
|
compatible = "gpio-fan";
|
|
alarm-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
leds {
|
|
pinctrl-names = "default";
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "green:speed";
|
|
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
};
|
|
|
|
led-1 {
|
|
label = "green:poe";
|
|
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
};
|
|
|
|
led_sys: led-2 {
|
|
label = "green:sys";
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
};
|
|
|
|
led-3 {
|
|
label = "green:fan";
|
|
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
};
|
|
|
|
led-4 {
|
|
label = "amber:fan";
|
|
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
function = "fault-fan";
|
|
};
|
|
|
|
led-5 {
|
|
label = "green:poe-max";
|
|
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = "alarm-poe";
|
|
};
|
|
};
|
|
|
|
i2c-gpio-0 {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
i2c-gpio,delay-us = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* LAN9 - LAN12 */
|
|
tps23861@5 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x05>;
|
|
};
|
|
|
|
/* LAN17 - LAN20 */
|
|
tps23861@6 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x06>;
|
|
};
|
|
|
|
/* LAN45 - LAN48 */
|
|
tps23861@9 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x09>;
|
|
};
|
|
|
|
/* LAN37 - LAN40 */
|
|
tps23861@a {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x0a>;
|
|
};
|
|
|
|
/* LAN1 - LAN4 */
|
|
tps23861@14 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x14>;
|
|
};
|
|
|
|
/* LAN25 - LAN28 */
|
|
tps23861@24 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x24>;
|
|
};
|
|
|
|
/* LAN33 - LAN 36 */
|
|
tps23861@25 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x25>;
|
|
};
|
|
|
|
/* LAN41 - LAN44 */
|
|
tps23861@26 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x26>;
|
|
};
|
|
|
|
/* LAN13 - LAN16 */
|
|
tps23861@29 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x29>;
|
|
};
|
|
|
|
/* LAN29 - LAN32 */
|
|
tps23861@2c {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x2c>;
|
|
};
|
|
|
|
/* LAN5 - LAN8 */
|
|
tps23861@48 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x48>;
|
|
};
|
|
|
|
/* LAN21 - LAN24 */
|
|
tps23861@49 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x49>;
|
|
};
|
|
};
|
|
|
|
gpio-restart {
|
|
compatible = "gpio-restart";
|
|
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&gpio0 {
|
|
poe-enable {
|
|
gpio-hog;
|
|
gpios = <23 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "poe-enable";
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0xe0000>;
|
|
read-only;
|
|
};
|
|
partition@e0000 {
|
|
label = "u-boot-env";
|
|
reg = <0xe0000 0x20000>;
|
|
};
|
|
|
|
/* We use the "sys", "usrimg1" and "usrimg2" partitions
|
|
* as firmware since the kernel needs to be in "sys", but the
|
|
* partition is too small to hold the "rootfs" as well.
|
|
* The original partition map contains:
|
|
*
|
|
* partition@100000 {
|
|
* label = "sys";
|
|
* reg = <0x100000 0x600000>;
|
|
* };
|
|
* partition@700000 {
|
|
* label = "usrimg1";
|
|
* reg = <0x700000 0xa00000>;
|
|
* };
|
|
* partition@1100000 {
|
|
* label = "usrimg2";
|
|
* reg = <0x1100000 0xa00000>;
|
|
* };
|
|
*/
|
|
|
|
partition@100000 {
|
|
label = "firmware";
|
|
reg = <0x100000 0x1a00000>;
|
|
};
|
|
partition@1b00000 {
|
|
label = "usrappfs";
|
|
reg = <0x1b00000 0x400000>;
|
|
};
|
|
partition@1f00000 {
|
|
compatible = "nvmem-cells";
|
|
label = "para";
|
|
reg = <0x1f00000 0x100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
read-only;
|
|
|
|
factory_macaddr: macaddr@fdff4 {
|
|
reg = <0xfdff4 0x6>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ðernet0 {
|
|
nvmem-cells = <&factory_macaddr>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
mdio: mdio-bus {
|
|
compatible = "realtek,rtl838x-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* External phy RTL8218B #1 */
|
|
EXTERNAL_PHY(0)
|
|
EXTERNAL_PHY(1)
|
|
EXTERNAL_PHY(2)
|
|
EXTERNAL_PHY(3)
|
|
EXTERNAL_PHY(4)
|
|
EXTERNAL_PHY(5)
|
|
EXTERNAL_PHY(6)
|
|
EXTERNAL_PHY(7)
|
|
|
|
/* External phy RTL8218B #2 */
|
|
EXTERNAL_PHY(8)
|
|
EXTERNAL_PHY(9)
|
|
EXTERNAL_PHY(10)
|
|
EXTERNAL_PHY(11)
|
|
EXTERNAL_PHY(12)
|
|
EXTERNAL_PHY(13)
|
|
EXTERNAL_PHY(14)
|
|
EXTERNAL_PHY(15)
|
|
|
|
/* External phy RTL8218B #3 */
|
|
EXTERNAL_PHY(16)
|
|
EXTERNAL_PHY(17)
|
|
EXTERNAL_PHY(18)
|
|
EXTERNAL_PHY(19)
|
|
EXTERNAL_PHY(20)
|
|
EXTERNAL_PHY(21)
|
|
EXTERNAL_PHY(22)
|
|
EXTERNAL_PHY(23)
|
|
|
|
/* External phy RTL8218B #4 */
|
|
EXTERNAL_PHY(24)
|
|
EXTERNAL_PHY(25)
|
|
EXTERNAL_PHY(26)
|
|
EXTERNAL_PHY(27)
|
|
EXTERNAL_PHY(28)
|
|
EXTERNAL_PHY(29)
|
|
EXTERNAL_PHY(30)
|
|
EXTERNAL_PHY(31)
|
|
|
|
/* External phy RTL8218B #5 */
|
|
EXTERNAL_PHY(32)
|
|
EXTERNAL_PHY(33)
|
|
EXTERNAL_PHY(34)
|
|
EXTERNAL_PHY(35)
|
|
EXTERNAL_PHY(36)
|
|
EXTERNAL_PHY(37)
|
|
EXTERNAL_PHY(38)
|
|
EXTERNAL_PHY(39)
|
|
|
|
/* External phy RTL8218B #6 */
|
|
EXTERNAL_PHY(40)
|
|
EXTERNAL_PHY(41)
|
|
EXTERNAL_PHY(42)
|
|
EXTERNAL_PHY(43)
|
|
EXTERNAL_PHY(44)
|
|
EXTERNAL_PHY(45)
|
|
EXTERNAL_PHY(46)
|
|
EXTERNAL_PHY(47)
|
|
};
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
SWITCH_PORT(0, 01, qsgmii)
|
|
SWITCH_PORT(1, 02, qsgmii)
|
|
SWITCH_PORT(2, 03, qsgmii)
|
|
SWITCH_PORT(3, 04, qsgmii)
|
|
SWITCH_PORT(4, 05, qsgmii)
|
|
SWITCH_PORT(5, 06, qsgmii)
|
|
SWITCH_PORT(6, 07, qsgmii)
|
|
SWITCH_PORT(7, 08, qsgmii)
|
|
|
|
SWITCH_PORT(8, 09, qsgmii)
|
|
SWITCH_PORT(9, 10, qsgmii)
|
|
SWITCH_PORT(10, 11, qsgmii)
|
|
SWITCH_PORT(11, 12, qsgmii)
|
|
SWITCH_PORT(12, 13, qsgmii)
|
|
SWITCH_PORT(13, 14, qsgmii)
|
|
SWITCH_PORT(14, 15, qsgmii)
|
|
SWITCH_PORT(15, 16, qsgmii)
|
|
|
|
SWITCH_PORT(16, 17, qsgmii)
|
|
SWITCH_PORT(17, 18, qsgmii)
|
|
SWITCH_PORT(18, 19, qsgmii)
|
|
SWITCH_PORT(19, 20, qsgmii)
|
|
SWITCH_PORT(20, 21, qsgmii)
|
|
SWITCH_PORT(21, 22, qsgmii)
|
|
SWITCH_PORT(22, 23, qsgmii)
|
|
SWITCH_PORT(23, 24, qsgmii)
|
|
|
|
SWITCH_PORT(24, 25, qsgmii)
|
|
SWITCH_PORT(25, 26, qsgmii)
|
|
SWITCH_PORT(26, 27, qsgmii)
|
|
SWITCH_PORT(27, 28, qsgmii)
|
|
SWITCH_PORT(28, 29, qsgmii)
|
|
SWITCH_PORT(29, 30, qsgmii)
|
|
SWITCH_PORT(30, 31, qsgmii)
|
|
SWITCH_PORT(31, 32, qsgmii)
|
|
|
|
SWITCH_PORT(32, 33, qsgmii)
|
|
SWITCH_PORT(33, 34, qsgmii)
|
|
SWITCH_PORT(34, 35, qsgmii)
|
|
SWITCH_PORT(35, 36, qsgmii)
|
|
SWITCH_PORT(36, 37, qsgmii)
|
|
SWITCH_PORT(37, 38, qsgmii)
|
|
SWITCH_PORT(38, 39, qsgmii)
|
|
SWITCH_PORT(39, 40, qsgmii)
|
|
|
|
SWITCH_PORT(40, 41, qsgmii)
|
|
SWITCH_PORT(41, 42, qsgmii)
|
|
SWITCH_PORT(42, 43, qsgmii)
|
|
SWITCH_PORT(43, 44, qsgmii)
|
|
SWITCH_PORT(44, 45, qsgmii)
|
|
SWITCH_PORT(45, 46, qsgmii)
|
|
SWITCH_PORT(46, 47, qsgmii)
|
|
SWITCH_PORT(47, 48, qsgmii)
|
|
|
|
/* CPU-Port */
|
|
port@52 {
|
|
ethernet = <ðernet0>;
|
|
reg = <52>;
|
|
phy-mode = "internal";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|