mirror of
https://github.com/openwrt/openwrt.git
synced 2025-03-04 13:08:14 +00:00
9703a2adcc
Refresh all patches on top of kernel 5.10.138.
The following patches were applied upstream:
bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch
bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch
bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch
bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch
bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch
bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch
bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch
bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch
bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch
bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more.
bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch
Fixes: 89956c653252 ("kernel: bump 5.10 to 5.10.138")
Fixes: 4209c33ae27d ("kernel: bump 5.10 to 5.10.137")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
37 lines
1.2 KiB
Diff
37 lines
1.2 KiB
Diff
From 39e3ab3e857a617b982dbeee2037f13edc46f799 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Mon, 23 Sep 2019 09:26:41 +0100
|
|
Subject: [PATCH] kbuild: Allow .dtbo overlays to be built piecemeal
|
|
|
|
Before 4.20, it was possible to build an arbitrary overlay by copying
|
|
it to arm/boot/dts/overlays/mytest-overlay.dts and running:
|
|
|
|
make ARCH=arm overlays/mytest.dtbo
|
|
|
|
In 4.20 the .dtb build rules were centralised, requiring the dowstream
|
|
.dtbo build rules to be changed. They were, enough to support "make ...
|
|
dtbs", but not sufficiently to allow this ad-hoc, one-off building of
|
|
individual files.
|
|
|
|
Add the missing makefile rule to support this way of building.
|
|
|
|
See: https://github.com/raspberrypi/linux/issues/3250
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
Makefile | 3 +++
|
|
1 file changed, 3 insertions(+)
|
|
|
|
--- a/Makefile
|
|
+++ b/Makefile
|
|
@@ -1364,6 +1364,9 @@ ifneq ($(dtstree),)
|
|
%.dtb: include/config/kernel.release scripts_dtc
|
|
$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
|
|
|
|
+%.dtbo: prepare3 scripts_dtc
|
|
+ $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
|
|
+
|
|
PHONY += dtbs dtbs_install dtbs_check
|
|
dtbs: include/config/kernel.release scripts_dtc
|
|
$(Q)$(MAKE) $(build)=$(dtstree)
|