mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
c881d7ab03
This patch add u-boot for CheckPoint L-50 routers. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
929 lines
19 KiB
Diff
929 lines
19 KiB
Diff
From 742f780f62ace452b83e2463f1f1afdda4b724ea Mon Sep 17 00:00:00 2001
|
|
From: Pawel Dembicki <paweldembicki@gmail.com>
|
|
Date: Sun, 26 Jan 2020 07:27:24 +0100
|
|
Subject: [PATCH] arm: kirkwood: add CheckPoint L-50 device
|
|
|
|
This patch adds support for the Check Point L-50 from 600/1100 series
|
|
routers.
|
|
|
|
Specification:
|
|
-CPU: Marvell Kirkwood 88F6821 1200MHz
|
|
-RAM: 512MB
|
|
-Flash: NAND 512MB
|
|
-WiFi: mPCIe card based on Atheros AR9287 b/g/n
|
|
-WAN: 1 Gigabit Port (Marvell 88E1116R PHY)
|
|
-LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4))
|
|
-USB: 2x USB2.0
|
|
-Express card slot
|
|
-SD card slot
|
|
-Serial console: RJ-45 115200 8n1
|
|
-Unsupported DSL
|
|
|
|
Known limitations:
|
|
- In board is used two switches in chain. Second Marvell is not used
|
|
in u-Boot.
|
|
|
|
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
|
|
---
|
|
arch/arm/dts/Makefile | 1 +
|
|
arch/arm/dts/kirkwood-l-50.dts | 439 +++++++++++++++++++++++++++++
|
|
arch/arm/mach-kirkwood/Kconfig | 4 +
|
|
board/checkpoint/l-50/Kconfig | 12 +
|
|
board/checkpoint/l-50/MAINTAINERS | 6 +
|
|
board/checkpoint/l-50/Makefile | 11 +
|
|
board/checkpoint/l-50/kwbimage.cfg | 36 +++
|
|
board/checkpoint/l-50/l-50.c | 172 +++++++++++
|
|
board/checkpoint/l-50/l-50.h | 29 ++
|
|
configs/l-50_defconfig | 59 ++++
|
|
include/configs/l-50.h | 59 ++++
|
|
11 files changed, 828 insertions(+)
|
|
create mode 100644 arch/arm/dts/kirkwood-l-50.dts
|
|
create mode 100644 board/checkpoint/l-50/Kconfig
|
|
create mode 100644 board/checkpoint/l-50/MAINTAINERS
|
|
create mode 100644 board/checkpoint/l-50/Makefile
|
|
create mode 100644 board/checkpoint/l-50/kwbimage.cfg
|
|
create mode 100644 board/checkpoint/l-50/l-50.c
|
|
create mode 100644 board/checkpoint/l-50/l-50.h
|
|
create mode 100644 configs/l-50_defconfig
|
|
create mode 100644 include/configs/l-50.h
|
|
|
|
--- a/arch/arm/dts/Makefile
|
|
+++ b/arch/arm/dts/Makefile
|
|
@@ -51,6 +51,7 @@ dtb-$(CONFIG_KIRKWOOD) += \
|
|
kirkwood-iconnect.dtb \
|
|
kirkwood-is2.dtb \
|
|
kirkwood-km_kirkwood.dtb \
|
|
+ kirkwood-l-50.dtb \
|
|
kirkwood-lsxhl.dtb \
|
|
kirkwood-lschlv2.dtb \
|
|
kirkwood-net2big.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/dts/kirkwood-l-50.dts
|
|
@@ -0,0 +1,439 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/*
|
|
+ * Check Point L-50 Board Description
|
|
+ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "kirkwood.dtsi"
|
|
+#include "kirkwood-6281.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Check Point L-50";
|
|
+ compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
|
+
|
|
+ memory {
|
|
+ device_type = "memory";
|
|
+ reg = <0x00000000 0x20000000>;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "console=ttyS0,115200n8";
|
|
+ stdout-path = &uart0;
|
|
+ };
|
|
+
|
|
+ ocp@f1000000 {
|
|
+ pinctrl: pin-controller@10000 {
|
|
+ pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ pmx_sysrst: pmx-sysrst {
|
|
+ marvell,pins = "mpp6";
|
|
+ marvell,function = "sysrst";
|
|
+ };
|
|
+
|
|
+ pmx_button29: pmx_button29 {
|
|
+ marvell,pins = "mpp29";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_led38: pmx_led38 {
|
|
+ marvell,pins = "mpp38";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+
|
|
+ pmx_sdio_cd: pmx-sdio-cd {
|
|
+ marvell,pins = "mpp46";
|
|
+ marvell,function = "gpio";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ serial@12000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ mvsdio@90000 {
|
|
+ status = "okay";
|
|
+ cd-gpios = <&gpio1 14 9>;
|
|
+ };
|
|
+
|
|
+ i2c@11000 {
|
|
+ status = "okay";
|
|
+ clock-frequency = <400000>;
|
|
+
|
|
+ gpio2: gpio-expander@20{
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ compatible = "semtech,sx1505q";
|
|
+ reg = <0x20>;
|
|
+
|
|
+ gpio-controller;
|
|
+ };
|
|
+
|
|
+ /* Three GPIOs from 0x21 exp. are undescribed in dts:
|
|
+ * 1: DSL module reset (active low)
|
|
+ * 5: mPCIE reset (active low)
|
|
+ * 6: Express card reset (active low)
|
|
+ */
|
|
+ gpio3: gpio-expander@21{
|
|
+ #gpio-cells = <2>;
|
|
+ #interrupt-cells = <2>;
|
|
+ compatible = "semtech,sx1505q";
|
|
+ reg = <0x21>;
|
|
+
|
|
+ gpio-controller;
|
|
+ };
|
|
+
|
|
+ rtc@30 {
|
|
+ compatible = "s35390a";
|
|
+ reg = <0x30>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ status_green {
|
|
+ label = "l-50:green:status";
|
|
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ status_red {
|
|
+ label = "l-50:red:status";
|
|
+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ wifi {
|
|
+ label = "l-50:green:wifi";
|
|
+ gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "phy0tpt";
|
|
+ };
|
|
+
|
|
+ internet_green {
|
|
+ label = "l-50:green:internet";
|
|
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ internet_red {
|
|
+ label = "l-50:red:internet";
|
|
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ usb1_green {
|
|
+ label = "l-50:green:usb1";
|
|
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "usbport";
|
|
+ trigger-sources = <&hub_port3>;
|
|
+ };
|
|
+
|
|
+ usb1_red {
|
|
+ label = "l-50:red:usb1";
|
|
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ usb2_green {
|
|
+ label = "l-50:green:usb2";
|
|
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "usbport";
|
|
+ trigger-sources = <&hub_port1>;
|
|
+ };
|
|
+
|
|
+ usb2_red {
|
|
+ label = "l-50:red:usb2";
|
|
+ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ usb2_pwr {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "usb2_pwr";
|
|
+
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ usb1_pwr {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "usb1_pwr";
|
|
+
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ mpcie_pwr {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "mpcie_pwr";
|
|
+
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
|
|
+ enable-active-high;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ express_card_pwr {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "express_card_pwr";
|
|
+
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
|
|
+ enable-active-high;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ factory_defaults {
|
|
+ label = "factory_defaults";
|
|
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&mdio {
|
|
+ status = "okay";
|
|
+
|
|
+ ethphy8: ethernet-phy@8 {
|
|
+ reg = <0x08>;
|
|
+ };
|
|
+
|
|
+ switch0: switch@10 {
|
|
+ compatible = "marvell,mv88e6085";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x10>;
|
|
+ dsa,member = <0 0>;
|
|
+
|
|
+ ports {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ label = "lan5";
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ reg = <1>;
|
|
+ label = "lan1";
|
|
+ };
|
|
+
|
|
+ port@2 {
|
|
+ reg = <2>;
|
|
+ label = "lan6";
|
|
+ };
|
|
+
|
|
+ port@3 {
|
|
+ reg = <3>;
|
|
+ label = "lan2";
|
|
+ };
|
|
+
|
|
+ port@4 {
|
|
+ reg = <4>;
|
|
+ label = "lan7";
|
|
+ };
|
|
+
|
|
+ switch0port5: port@5 {
|
|
+ reg = <5>;
|
|
+ phy-mode = "rgmii-txid";
|
|
+ link = <&switch1port5>;
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ port@6 {
|
|
+ reg = <6>;
|
|
+ label = "cpu";
|
|
+ phy-mode = "rgmii-id";
|
|
+ ethernet = <ð1port>;
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ switch@11 {
|
|
+ compatible = "marvell,mv88e6085";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x11>;
|
|
+ dsa,member = <0 1>;
|
|
+
|
|
+ ports {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ label = "lan3";
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ reg = <1>;
|
|
+ label = "lan8";
|
|
+ };
|
|
+
|
|
+ port@2 {
|
|
+ reg = <2>;
|
|
+ label = "lan4";
|
|
+ };
|
|
+
|
|
+ port@3 {
|
|
+ reg = <3>;
|
|
+ label = "dmz";
|
|
+ };
|
|
+
|
|
+ switch1port5: port@5 {
|
|
+ reg = <5>;
|
|
+ phy-mode = "rgmii-txid";
|
|
+ link = <&switch0port5>;
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ port@6 {
|
|
+ reg = <6>;
|
|
+ label = "dsl";
|
|
+ fixed-link {
|
|
+ speed = <100>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+ð0 {
|
|
+ status = "okay";
|
|
+ ethernet0-port@0 {
|
|
+ phy-handle = <ðphy8>;
|
|
+ };
|
|
+};
|
|
+
|
|
+ð1 {
|
|
+ status = "okay";
|
|
+ ethernet1-port@0 {
|
|
+ speed = <1000>;
|
|
+ duplex = <1>;
|
|
+ phy-handle = <&switch0>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&nand {
|
|
+ status = "okay";
|
|
+ pinctrl-0 = <&pmx_nand>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ partition@0 {
|
|
+ label = "u-boot";
|
|
+ reg = <0x00000000 0x000c0000>;
|
|
+ };
|
|
+
|
|
+ partition@a0000 {
|
|
+ label = "bootldr-env";
|
|
+ reg = <0x000c0000 0x00040000>;
|
|
+ };
|
|
+
|
|
+ partition@100000 {
|
|
+ label = "kernel-1";
|
|
+ reg = <0x00100000 0x00800000>;
|
|
+ };
|
|
+
|
|
+ partition@900000 {
|
|
+ label = "rootfs-1";
|
|
+ reg = <0x00900000 0x07100000>;
|
|
+ };
|
|
+
|
|
+ partition@7a00000 {
|
|
+ label = "kernel-2";
|
|
+ reg = <0x07a00000 0x00800000>;
|
|
+ };
|
|
+
|
|
+ partition@8200000 {
|
|
+ label = "rootfs-2";
|
|
+ reg = <0x08200000 0x07100000>;
|
|
+ };
|
|
+
|
|
+ partition@f300000 {
|
|
+ label = "default_sw";
|
|
+ reg = <0x0f300000 0x07900000>;
|
|
+ };
|
|
+
|
|
+ partition@16c00000 {
|
|
+ label = "logs";
|
|
+ reg = <0x16c00000 0x01800000>;
|
|
+ };
|
|
+
|
|
+ partition@18400000 {
|
|
+ label = "preset_cfg";
|
|
+ reg = <0x18400000 0x00100000>;
|
|
+ };
|
|
+
|
|
+ partition@18500000 {
|
|
+ label = "adsl";
|
|
+ reg = <0x18500000 0x00100000>;
|
|
+ };
|
|
+
|
|
+ partition@18600000 {
|
|
+ label = "storage";
|
|
+ reg = <0x18600000 0x07a00000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&rtc {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&pciec {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pcie0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sata_phy0 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&sata_phy1 {
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&usb0 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ port@1 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <1>;
|
|
+ #trigger-source-cells = <0>;
|
|
+
|
|
+ hub_port1: port@1 {
|
|
+ reg = <1>;
|
|
+ #trigger-source-cells = <0>;
|
|
+ };
|
|
+
|
|
+ hub_port3: port@3 {
|
|
+ reg = <3>;
|
|
+ #trigger-source-cells = <0>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- a/arch/arm/mach-kirkwood/Kconfig
|
|
+++ b/arch/arm/mach-kirkwood/Kconfig
|
|
@@ -74,6 +74,9 @@ config TARGET_DB_88F6281_BP
|
|
config TARGET_NSA325
|
|
bool "Zyxel NSA325 board"
|
|
|
|
+config TARGET_L50
|
|
+ bool "Check Point L-50"
|
|
+
|
|
endchoice
|
|
|
|
config SYS_SOC
|
|
@@ -102,5 +105,6 @@ source "board/zyxel/nsa325/Kconfig"
|
|
source "board/alliedtelesis/SBx81LIFKW/Kconfig"
|
|
source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
|
|
source "board/Marvell/db-88f6281-bp/Kconfig"
|
|
+source "board/checkpoint/l-50/Kconfig"
|
|
|
|
endif
|
|
--- /dev/null
|
|
+++ b/board/checkpoint/l-50/Kconfig
|
|
@@ -0,0 +1,12 @@
|
|
+if TARGET_L50
|
|
+
|
|
+config SYS_BOARD
|
|
+ default "l-50"
|
|
+
|
|
+config SYS_VENDOR
|
|
+ default "checkpoint"
|
|
+
|
|
+config SYS_CONFIG_NAME
|
|
+ default "l-50"
|
|
+
|
|
+endif
|
|
--- /dev/null
|
|
+++ b/board/checkpoint/l-50/MAINTAINERS
|
|
@@ -0,0 +1,6 @@
|
|
+L50 BOARD
|
|
+M: Pawel Dembicki <paweldembicki@gmail.com>
|
|
+S: Maintained
|
|
+F: board/checkpoint/l-50/
|
|
+F: include/configs/l-50.h
|
|
+F: configs/l-50_defconfig
|
|
--- /dev/null
|
|
+++ b/board/checkpoint/l-50/Makefile
|
|
@@ -0,0 +1,11 @@
|
|
+# SPDX-License-Identifier: GPL-2.0+
|
|
+#
|
|
+# (C) Copyright 2020
|
|
+# Pawel Dembicki <paweldembicki@gmail.com>
|
|
+#
|
|
+# Based on Kirkwood support:
|
|
+# (C) Copyright 2009
|
|
+# Marvell Semiconductor <www.marvell.com>
|
|
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
+
|
|
+obj-y := l-50.o
|
|
--- /dev/null
|
|
+++ b/board/checkpoint/l-50/kwbimage.cfg
|
|
@@ -0,0 +1,36 @@
|
|
+# SPDX-License-Identifier: GPL-2.0+
|
|
+#
|
|
+# Values taken from original bootloader source.
|
|
+# Based on:
|
|
+# dramregs_seattle_400rd_A.txt from uboot_src_CP600_1100.
|
|
+
|
|
+# Boot Media configurations
|
|
+BOOT_FROM nand
|
|
+NAND_ECC_MODE default
|
|
+NAND_PAGE_SIZE 0x0800
|
|
+
|
|
+DATA 0xFFD100e0 0x1b1b1b9b
|
|
+DATA 0xFFD01400 0x43000c30
|
|
+DATA 0xFFD01404 0x39543000
|
|
+DATA 0xFFD01408 0x22125451
|
|
+DATA 0xFFD0140C 0x00000833
|
|
+DATA 0xFFD01410 0x000000cc
|
|
+DATA 0xFFD01414 0x00000000
|
|
+DATA 0xFFD01418 0x00000000
|
|
+DATA 0xFFD0141C 0x00000C52
|
|
+DATA 0xFFD01420 0x00000004
|
|
+DATA 0xFFD01424 0x0000F17F
|
|
+DATA 0xFFD01428 0x00085520
|
|
+DATA 0xFFD0147C 0x00008552
|
|
+DATA 0xFFD01504 0x0FFFFFF1
|
|
+DATA 0xFFD01508 0x10000000
|
|
+DATA 0xFFD0150C 0x0FFFFFF5
|
|
+DATA 0xFFD01514 0x00000000
|
|
+DATA 0xFFD0151C 0x00000000
|
|
+DATA 0xFFD01494 0x00120012
|
|
+DATA 0xFFD01498 0x00000000
|
|
+DATA 0xFFD0149C 0x0000E40F
|
|
+DATA 0xFFD01480 0x00000001
|
|
+DATA 0xFFD20134 0x66666666
|
|
+DATA 0xFFD20138 0x66666666
|
|
+DATA 0x0 0x0
|
|
--- /dev/null
|
|
+++ b/board/checkpoint/l-50/l-50.c
|
|
@@ -0,0 +1,172 @@
|
|
+// SPDX-License-Identifier: GPL-2.0+
|
|
+/*
|
|
+ * Copyright (C) 2020
|
|
+ * Pawel Dembicki <paweldembicki@gmail.com>
|
|
+ *
|
|
+ * Based on Kirkwood support:
|
|
+ * (C) Copyright 2009
|
|
+ * Marvell Semiconductor <www.marvell.com>
|
|
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
+ */
|
|
+
|
|
+#include <common.h>
|
|
+#include <dm.h>
|
|
+#include <i2c.h>
|
|
+#include <miiphy.h>
|
|
+#include <netdev.h>
|
|
+#include <asm/arch/cpu.h>
|
|
+#include <asm/arch/soc.h>
|
|
+#include <asm/arch/mpp.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+#include "l-50.h"
|
|
+
|
|
+DECLARE_GLOBAL_DATA_PTR;
|
|
+
|
|
+int board_early_init_f(void)
|
|
+{
|
|
+ /* Gpio configuration */
|
|
+ mvebu_config_gpio(L50_OE_VAL_LOW, L50_OE_VAL_HIGH,
|
|
+ L50_OE_LOW, L50_OE_HIGH);
|
|
+
|
|
+ /* Multi-Purpose Pins Functionality configuration */
|
|
+ static const u32 kwmpp_config[] = {
|
|
+ MPP0_NF_IO2,
|
|
+ MPP1_NF_IO3,
|
|
+ MPP2_NF_IO4,
|
|
+ MPP3_NF_IO5,
|
|
+ MPP4_NF_IO6,
|
|
+ MPP5_NF_IO7,
|
|
+ MPP6_SYSRST_OUTn,
|
|
+ MPP7_SPI_SCn,
|
|
+ MPP8_TW_SDA,
|
|
+ MPP9_TW_SCK,
|
|
+ MPP10_UART0_TXD,
|
|
+ MPP11_UART0_RXD,
|
|
+ MPP12_SD_CLK,
|
|
+ MPP13_SD_CMD,
|
|
+ MPP14_SD_D0,
|
|
+ MPP15_SD_D1,
|
|
+ MPP16_SD_D2,
|
|
+ MPP17_SD_D3,
|
|
+ MPP18_NF_IO0,
|
|
+ MPP19_NF_IO1,
|
|
+ MPP20_GE1_0,
|
|
+ MPP21_GE1_1,
|
|
+ MPP22_GE1_2,
|
|
+ MPP23_GE1_3,
|
|
+ MPP24_GE1_4,
|
|
+ MPP25_GE1_5,
|
|
+ MPP26_GE1_6,
|
|
+ MPP27_GE1_7,
|
|
+ MPP28_GPIO,
|
|
+ MPP29_GPIO,
|
|
+ MPP30_GE1_10,
|
|
+ MPP31_GE1_11,
|
|
+ MPP32_GE1_12,
|
|
+ MPP33_GE1_13,
|
|
+ MPP34_GPIO,
|
|
+ MPP35_GPIO,
|
|
+ MPP36_AUDIO_SPDIFI, /* value from stock u-boot */
|
|
+ MPP37_GPIO,
|
|
+ MPP38_GPIO,
|
|
+ MPP39_TDM_SPI_CS0,
|
|
+ MPP40_GPIO,
|
|
+ MPP41_GPIO,
|
|
+ MPP42_TDM_SPI_MOSI,
|
|
+ MPP43_TDM_CODEC_INTn,
|
|
+ MPP44_GPIO,
|
|
+ MPP45_TDM_PCLK,
|
|
+ MPP46_GPIO,
|
|
+ MPP47_TDM_DRX,
|
|
+ MPP48_GPIO,
|
|
+ MPP49_GPIO,
|
|
+ 0
|
|
+ };
|
|
+ kirkwood_mpp_conf(kwmpp_config, NULL);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void board_gpio_expander_init(void)
|
|
+{
|
|
+ struct udevice *dev0, *dev1;
|
|
+ uchar data_buffer;
|
|
+ int ret;
|
|
+
|
|
+ ret = i2c_get_chip_for_busnum(0, L50_GPIO0_I2C_ADDRESS, 1, &dev0);
|
|
+ if (ret) {
|
|
+ debug("%s: Cannot find I2C GPIO expander chip 0x02%X\n",
|
|
+ __func__, L50_GPIO0_I2C_ADDRESS);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ ret = i2c_get_chip_for_busnum(0, L50_GPIO1_I2C_ADDRESS, 1, &dev1);
|
|
+ if (ret) {
|
|
+ debug("%s: Cannot find I2C GPIO expander chip 0x02%X\n",
|
|
+ __func__, L50_GPIO1_I2C_ADDRESS);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ /* Set IO as output */
|
|
+ data_buffer = 0x0;
|
|
+ dm_i2c_write(dev0, 1, &data_buffer, 1);
|
|
+ dm_i2c_write(dev1, 1, &data_buffer, 1);
|
|
+
|
|
+ /* Set all leds off, reset asserted, pwr off */
|
|
+ data_buffer = 0xbf;
|
|
+ dm_i2c_write(dev0, 0, &data_buffer, 1);
|
|
+ data_buffer = 0x1c;
|
|
+ dm_i2c_write(dev1, 0, &data_buffer, 1);
|
|
+
|
|
+ mdelay(100);
|
|
+
|
|
+ /* Set pwr on */
|
|
+ data_buffer = 0xa5;
|
|
+ dm_i2c_write(dev1, 0, &data_buffer, 1);
|
|
+
|
|
+ mdelay(100);
|
|
+
|
|
+ /* Set reset deasserted, status red led enabled*/
|
|
+ data_buffer = 0xff;
|
|
+ dm_i2c_write(dev0, 0, &data_buffer, 1);
|
|
+ data_buffer = 0xe3;
|
|
+ dm_i2c_write(dev1, 0, &data_buffer, 1);
|
|
+}
|
|
+
|
|
+int board_init(void)
|
|
+{
|
|
+ /* Boot parameters address */
|
|
+ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
|
+
|
|
+ board_gpio_expander_init();
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_RESET_PHY_R
|
|
+/* Configure and initialize PHY */
|
|
+void reset_phy(void)
|
|
+{
|
|
+ u16 devadr;
|
|
+ char *name = "ethernet-controller@72000";
|
|
+
|
|
+ if (miiphy_set_current_dev(name))
|
|
+ return;
|
|
+
|
|
+ /* command to read PHY dev address */
|
|
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) {
|
|
+ printf("Err..(%s) could not read PHY dev address\n", __func__);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Fix PHY led configuration
|
|
+ */
|
|
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 3);
|
|
+ miiphy_write(name, devadr, 0x10, 0x1177);
|
|
+ miiphy_write(name, devadr, 0x11, 0x4417);
|
|
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
|
|
+
|
|
+ debug("88E1116 Initialized on %s\n", name);
|
|
+}
|
|
+#endif /* CONFIG_RESET_PHY_R */
|
|
--- /dev/null
|
|
+++ b/board/checkpoint/l-50/l-50.h
|
|
@@ -0,0 +1,29 @@
|
|
+/* SPDX-License-Identifier: GPL-2.0+ */
|
|
+/*
|
|
+ * Copyright (C) 2020
|
|
+ * Pawel Dembicki <paweldembicki@gmail.com>
|
|
+ *
|
|
+ * Based on Kirkwood support:
|
|
+ * (C) Copyright 2009
|
|
+ * Marvell Semiconductor <www.marvell.com>
|
|
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
+ */
|
|
+
|
|
+#ifndef __L50_H
|
|
+#define __L50_H
|
|
+
|
|
+/* GPIO configuration */
|
|
+#define L50_OE_LOW 0x30000000
|
|
+#define L50_OE_HIGH 0x0000004c
|
|
+#define L50_OE_VAL_LOW 0x00000000
|
|
+#define L50_OE_VAL_HIGH 0x00000000
|
|
+
|
|
+/* Expander GPIO addresses */
|
|
+
|
|
+#define L50_GPIO0_I2C_ADDRESS 0x20
|
|
+#define L50_GPIO1_I2C_ADDRESS 0x21
|
|
+
|
|
+/* PHY register */
|
|
+#define MV88E1116_PGADR_REG 22
|
|
+
|
|
+#endif /* __L50_H */
|
|
--- /dev/null
|
|
+++ b/configs/l-50_defconfig
|
|
@@ -0,0 +1,59 @@
|
|
+CONFIG_ARM=y
|
|
+CONFIG_SYS_DCACHE_OFF=y
|
|
+CONFIG_ARCH_CPU_INIT=y
|
|
+CONFIG_KIRKWOOD=y
|
|
+CONFIG_SYS_TEXT_BASE=0x600000
|
|
+CONFIG_TARGET_L50=y
|
|
+CONFIG_ENV_SIZE=0x20000
|
|
+CONFIG_ENV_OFFSET=0xC0000
|
|
+CONFIG_ENV_SECT_SIZE=0x20000
|
|
+CONFIG_ENV_ADDR=0xC0000
|
|
+CONFIG_IDENT_STRING="\nCheck Point L-50"
|
|
+CONFIG_NR_DRAM_BANKS=2
|
|
+# CONFIG_SYS_MALLOC_F is not set
|
|
+CONFIG_BOOTDELAY=1
|
|
+CONFIG_CONSOLE_MUX=y
|
|
+CONFIG_DISPLAY_BOARDINFO=y
|
|
+CONFIG_HUSH_PARSER=y
|
|
+# CONFIG_CMD_FLASH is not set
|
|
+#CONFIG_CMD_IDE=y
|
|
+CONFIG_CMD_I2C=y
|
|
+CONFIG_CMD_NAND=y
|
|
+CONFIG_CMD_USB=y
|
|
+# CONFIG_CMD_SETEXPR is not set
|
|
+CONFIG_CMD_DHCP=y
|
|
+CONFIG_CMD_MII=y
|
|
+CONFIG_CMD_PING=y
|
|
+CONFIG_CMD_EXT2=y
|
|
+CONFIG_CMD_FAT=y
|
|
+CONFIG_CMD_JFFS2=y
|
|
+CONFIG_CMD_MTDPARTS=y
|
|
+CONFIG_MTD=y
|
|
+CONFIG_MTD_RAW_NAND=y
|
|
+CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
|
|
+CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xc0000@0x0(u-boot)ro,0x40000@0xc0000(bootldr-env),0x7900000@0x100000(ubi),0x800000@0x7a00000(kernel-2),0x7100000@0x8200000(rootfs-2),0x7900000@0xf300000(default_sw),0x1800000@0x16c00000(logs),0x100000@0x18400000(preset_cfg),0x100000@0x18500000(adsl),-@0x18600000(storage)"
|
|
+CONFIG_CMD_UBI=y
|
|
+CONFIG_ISO_PARTITION=y
|
|
+CONFIG_OF_CONTROL=y
|
|
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-l-50"
|
|
+CONFIG_ENV_IS_IN_NAND=y
|
|
+CONFIG_DM=y
|
|
+CONFIG_DM_ETH=y
|
|
+#CONFIG_MVSATA_IDE=y
|
|
+CONFIG_MMC=y
|
|
+CONFIG_MVGBE=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_PHYLIB=y
|
|
+CONFIG_PHY_MARVELL=y
|
|
+CONFIG_MV88E61XX_SWITCH=y
|
|
+CONFIG_MV88E61XX_CPU_PORT=6
|
|
+CONFIG_MV88E61XX_PHY_PORTS=0x01f
|
|
+CONFIG_MV88E61XX_FIXED_PORTS=0
|
|
+#CONFIG_DM_RTC=y
|
|
+#CONFIG_RTC_MV=y
|
|
+CONFIG_SYS_NS16550=y
|
|
+CONFIG_DM_I2C=y
|
|
+CONFIG_SYS_I2C_MVTWSI=y
|
|
+CONFIG_USB=y
|
|
+CONFIG_USB_EHCI_HCD=y
|
|
+CONFIG_USB_STORAGE=y
|
|
--- /dev/null
|
|
+++ b/include/configs/l-50.h
|
|
@@ -0,0 +1,59 @@
|
|
+/* SPDX-License-Identifier: GPL-2.0+ */
|
|
+/*
|
|
+ * Copyright (C) 2020
|
|
+ * Pawel Dembicki <paweldembicki@gmail.com>
|
|
+ *
|
|
+ * Based on Kirkwood support:
|
|
+ * (C) Copyright 2009
|
|
+ * Marvell Semiconductor <www.marvell.com>
|
|
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
+ */
|
|
+
|
|
+#ifndef _CONFIG_L50_H
|
|
+#define _CONFIG_L50_H
|
|
+
|
|
+/*
|
|
+ * High Level Configuration Options (easy to change)
|
|
+ */
|
|
+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
|
|
+#define CONFIG_KW88F6281 /* SOC Name */
|
|
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
|
+
|
|
+/*
|
|
+ * mv-common.h should be defined after CMD configs since it used them
|
|
+ * to enable certain macros
|
|
+ */
|
|
+#include "mv-common.h"
|
|
+
|
|
+/* Remove or override few declarations from mv-common.h */
|
|
+
|
|
+/*
|
|
+ * Ethernet Driver configuration
|
|
+ */
|
|
+#ifdef CONFIG_CMD_NET
|
|
+#define CONFIG_MVGBE_PORTS {1, 1} /* enable port 0 only */
|
|
+#define CONFIG_NETCONSOLE
|
|
+#endif
|
|
+
|
|
+#define CONFIG_MV88E61XX_CPU_PORT_RX_DELAY
|
|
+#define CONFIG_MV88E61XX_CPU_PORT_TX_DELAY
|
|
+
|
|
+/*
|
|
+ * Enable GPI0 support
|
|
+ */
|
|
+#define CONFIG_KIRKWOOD_GPIO
|
|
+
|
|
+/*
|
|
+ * Default environment variables
|
|
+ */
|
|
+#define CONFIG_BOOTCOMMAND \
|
|
+ "ubi part ubi; " \
|
|
+ "ubi read 0x800000 kernel; " \
|
|
+ "bootm 0x800000"
|
|
+
|
|
+#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
+ "bootargs=console=ttyS0,115200\0" \
|
|
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
+ "bootargs_root=\0"
|
|
+#endif /* _CONFIG_L50_H */
|