mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-16 23:39:29 +00:00
cba6832622
These ethernet cards can be found onboard various x86 and x86_64 Gigabyte mainboards since the sandy-bridge/ ivy-bridge era. This driver supports the following QCA/"Killer" ethernet cards: 1969:1091 - AR8161 Gigabit Ethernet 1969:1090 - AR8162 Fast Ethernet 1969:10A1 - AR8171 Gigabit Ethernet 1969:10A0 - AR8172 Fast Ethernet 1969:E091 - Killer E2200 Gigabit Ethernet 1969:E0A1 - Killer E2400 Gigabit Ethernet 1969:E0B1 - Killer E2500 Gigabit Ethernet Successfully runtime tested with the onboard ethernet card of a Gigabyte GA-H77M-D3H ivy-bridge mainboard (x86_64/EFI image): 02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 [...] Subsystem: Gigabyte Technology Co., Ltd AR8161 [...] Kernel driver in use: alx Kernel modules: alx alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [...] alx 0000:02:00.0 eth0: NIC Up: 1 Gbps Full Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [fix typo, shorten subject to <50 characters, shorten lines to <76 chars.]
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org