openwrt/package/network/services/dnsmasq/Makefile
Kevin Darbyshire-Bryant cb9d5f0a7c dnsmasq: bump to latest patches on 2.80rc2
Refresh patches and backport upstream to current HEAD:

a997ca0 Fix sometimes missing DNSSEC RRs when DNSSEC validation not enabled.
51e4eee Fix address-dependent domains for IPv6.
05ff659 Fix stupid infinite loop introduced by preceding commit.
db0f488 Handle some corner cases in RA contructed interfaces with addresses changing interface.
7dcca6c Warn about the impact of cache-size on performance.
090856c Allow zone transfer in authoritative mode whenever auth-peer is specified.
cc5cc8f Sane error message when pcap file header is wrong.
c488b68 Handle standard and contructed dhcp-ranges on the same interface.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit fbf475403b)
2018-07-28 11:23:57 +01:00

186 lines
5.6 KiB
Makefile

#
# Copyright (C) 2006-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=dnsmasq
PKG_VERSION:=2.80test2
PKG_RELEASE:=4
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=http://thekelleys.org.uk/dnsmasq/test-releases
PKG_HASH:=e731666094699afcbad947f89f7f8afbf92e5ddc3c915459d4936159d81116f0
PKG_LICENSE:=GPL-2.0
PKG_LICENSE_FILES:=COPYING
PKG_CPE_ID:=cpe:/a:thekelleys:dnsmasq
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
PKG_INSTALL:=1
PKG_BUILD_PARALLEL:=1
PKG_CONFIG_DEPENDS:= CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcp \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcpv6 \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dnssec \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_auth \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_ipset \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_conntrack \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_noid \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_broken_rtc
include $(INCLUDE_DIR)/package.mk
define Package/dnsmasq/Default
SECTION:=net
CATEGORY:=Base system
TITLE:=DNS and DHCP server
URL:=http://www.thekelleys.org.uk/dnsmasq/
DEPENDS:=+libubus
USERID:=dnsmasq=453:dnsmasq=453
endef
define Package/dnsmasq
$(call Package/dnsmasq/Default)
VARIANT:=nodhcpv6
endef
define Package/dnsmasq-dhcpv6
$(call Package/dnsmasq/Default)
TITLE += (with DHCPv6 support)
DEPENDS+=@IPV6
VARIANT:=dhcpv6
endef
define Package/dnsmasq-full
$(call Package/dnsmasq/Default)
TITLE += (with DNSSEC, DHCPv6, Auth DNS, IPset, Conntrack, NO_ID enabled by default)
DEPENDS+=+PACKAGE_dnsmasq_full_dnssec:libnettle \
+PACKAGE_dnsmasq_full_ipset:kmod-ipt-ipset \
+PACKAGE_dnsmasq_full_conntrack:libnetfilter-conntrack
VARIANT:=full
endef
define Package/dnsmasq/description
It is intended to provide coupled DNS and DHCP service to a LAN.
endef
define Package/dnsmasq-dhcpv6/description
$(call Package/dnsmasq/description)
This is a variant with DHCPv6 support
endef
define Package/dnsmasq-full/description
$(call Package/dnsmasq/description)
This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS
and IPset, Conntrack support & NO_ID enabled by default.
endef
define Package/dnsmasq/conffiles
/etc/config/dhcp
/etc/dnsmasq.conf
endef
define Package/dnsmasq-full/config
if PACKAGE_dnsmasq-full
config PACKAGE_dnsmasq_full_dhcp
bool "Build with DHCP support."
default y
config PACKAGE_dnsmasq_full_dhcpv6
bool "Build with DHCPv6 support."
depends on IPV6 && PACKAGE_dnsmasq_full_dhcp
default y
config PACKAGE_dnsmasq_full_dnssec
bool "Build with DNSSEC support."
default y
config PACKAGE_dnsmasq_full_auth
bool "Build with the facility to act as an authoritative DNS server."
default y
config PACKAGE_dnsmasq_full_ipset
bool "Build with IPset support."
default y
config PACKAGE_dnsmasq_full_conntrack
bool "Build with Conntrack support."
default y
config PACKAGE_dnsmasq_full_noid
bool "Build with NO_ID. (hide *.bind pseudo domain)"
default y
config PACKAGE_dnsmasq_full_broken_rtc
bool "Build with HAVE_BROKEN_RTC."
default n
endif
endef
Package/dnsmasq-dhcpv6/conffiles = $(Package/dnsmasq/conffiles)
Package/dnsmasq-full/conffiles = $(Package/dnsmasq/conffiles)
TARGET_CFLAGS += -ffunction-sections -fdata-sections
TARGET_LDFLAGS += -Wl,--gc-sections
COPTS = $(if $(CONFIG_IPV6),,-DNO_IPV6)
ifeq ($(BUILD_VARIANT),nodhcpv6)
COPTS += -DNO_DHCP6
endif
ifeq ($(BUILD_VARIANT),full)
COPTS += $(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcp),,-DNO_DHCP) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcpv6),,-DNO_DHCP6) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dnssec),-DHAVE_DNSSEC) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_auth),,-DNO_AUTH) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_ipset),,-DNO_IPSET) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_conntrack),-DHAVE_CONNTRACK,) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_noid),-DNO_ID,) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_broken_rtc),-DHAVE_BROKEN_RTC)
COPTS += $(if $(CONFIG_LIBNETTLE_MINI),-DNO_GMP,)
else
COPTS += -DNO_AUTH -DNO_IPSET -DNO_ID
endif
MAKE_FLAGS := \
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS) $(TARGET_CPPFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
COPTS="$(COPTS)" \
PREFIX="/usr"
define Package/dnsmasq/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_INSTALL_DIR)/usr/sbin/dnsmasq $(1)/usr/sbin/
$(INSTALL_DIR) $(1)/etc/config
$(INSTALL_DATA) ./files/dhcp.conf $(1)/etc/config/dhcp
$(INSTALL_DATA) ./files/dnsmasq.conf $(1)/etc/dnsmasq.conf
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/dnsmasq.init $(1)/etc/init.d/dnsmasq
$(INSTALL_DIR) $(1)/etc/hotplug.d/dhcp
$(INSTALL_DIR) $(1)/etc/hotplug.d/neigh
$(INSTALL_DIR) $(1)/etc/hotplug.d/ntp
$(INSTALL_DIR) $(1)/etc/hotplug.d/tftp
$(INSTALL_DATA) ./files/dnsmasqsec.hotplug $(1)/etc/hotplug.d/ntp/25-dnsmasqsec
$(INSTALL_DIR) $(1)/usr/share/dnsmasq
$(INSTALL_DATA) ./files/rfc6761.conf $(1)/usr/share/dnsmasq/
$(INSTALL_DIR) $(1)/usr/lib/dnsmasq
$(INSTALL_BIN) ./files/dhcp-script.sh $(1)/usr/lib/dnsmasq/dhcp-script.sh
$(INSTALL_DIR) $(1)/usr/share/acl.d
$(INSTALL_DATA) ./files/dnsmasq_acl.json $(1)/usr/share/acl.d/
endef
Package/dnsmasq-dhcpv6/install = $(Package/dnsmasq/install)
define Package/dnsmasq-full/install
$(call Package/dnsmasq/install,$(1))
ifneq ($(CONFIG_PACKAGE_dnsmasq_full_dnssec),)
$(INSTALL_DIR) $(1)/usr/share/dnsmasq
$(INSTALL_DATA) $(PKG_BUILD_DIR)/trust-anchors.conf $(1)/usr/share/dnsmasq
endif
endef
$(eval $(call BuildPackage,dnsmasq))
$(eval $(call BuildPackage,dnsmasq-dhcpv6))
$(eval $(call BuildPackage,dnsmasq-full))