openwrt/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch
Robert Marko b5f32064ed ipq807x: add Qualcomm Atheros IPQ807x target
Qualcomm Atheros IPQ807x is a modern WiSoC featuring:
* Quad Core ARMv8 Cortex A-53
	* @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye
	* @ 1.4 GHz (IPQ8070A/1A) Codename Acorn
* Dual Band simultaneaous IEEE 802.11ax
	* 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A)
	* 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A)
	* 5G: 2x2/80MHz (IPQ8070A)
	* 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A)
	* 2G: 2x2/40MHz (IPQ8070A/1A)
* 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports)
* 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye
* 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn
* DDR3L/4 32/16 bit up to 2400MT/s
* SDIO 3.0/SD card 3.0/eMMC 5.1
* Dual USB 3.0
* One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane)
* Parallel NAND (ONFI)/LCD
* 6x QUP BLSP SPI/I2C/UART
* I2S, PCM, and TDMA
* HW PWM
* 1.8V configurable GPIO
* Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc)

Note that only v2 SOC models aka the ones ending with A suffix are
supported, v1 models do not comply to the final 802.11ax and have
lower clocks, lack the Gen3 PCIe etc.

SoC itself has two UBI32 cores for the NSS offloading system, however
currently no offloading is supported.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-01-16 12:42:23 +01:00

26 lines
1.1 KiB
Diff

From 204cd3516f59eb7040b814429187e674f49ba065 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Mon, 11 Jul 2022 22:34:05 +0200
Subject: [PATCH] pinctrl: qcom-pmic-gpio: add support for PMP8074
PMP8074 has 12 GPIO-s with holes on GPIO1 and GPIO12.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20220711203408.2949888-4-robimarko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1167,6 +1167,8 @@ static const struct of_device_id pmic_gp
{ .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
{ .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 },
{ .compatible = "qcom,pmm8155au-gpio", .data = (void *) 10 },
+ /* pmp8074 has 12 GPIOs with holes on 1 and 12 */
+ { .compatible = "qcom,pmp8074-gpio", .data = (void *) 12 },
{ .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 },
{ .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 },
/* pms405 has 12 GPIOs with holes on 1, 9, and 10 */