ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 07:46:48 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
cae263227f
openwrt/target/linux/brcm2708/patches-4.9/950-0130-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch
Rafał Miłecki fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix 
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-03-24 08:06:35 +01:00

330 lines
8.2 KiB
Diff
Raw Blame History

From 99c33b6e418cefebb461fee0ad3a927a0c4127f1 Mon Sep 17 00:00:00 2001
From: Michael Zoran <mzoran@crowfest.net>
Date: Sat, 14 Jan 2017 21:33:51 -0800
Subject: [PATCH] ARM64/DWC_OTG: Port dwc_otg driver to ARM64
In ARM64, the FIQ mechanism used by this driver is not current
implemented. As a workaround, reqular IRQ is used instead
of FIQ.
In a separate change, the IRQ-CPU mapping is round robined
on ARM64 to increase concurrency and allow multiple interrupts
to be serviced at a time. This reduces the need for FIQ.
Tests Run:
This mechanism is most likely to break when multiple USB devices
are attached at the same time. So the system was tested under
stress.
Devices:
1. USB Speakers playing back a FLAC audio through VLC
at 96KHz.(Higher then typically, but supported on my speakers).
2. sftp transferring large files through the buildin ethernet
connection which is connected through USB.
3. Keyboard and mouse attached and being used.
Although I do occasionally hear some glitches, the music seems to
play quite well.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
---
drivers/usb/host/dwc_otg/Makefile | 3 ++
drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 17 +++++++
drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 24 ++++++++++
drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ++
drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 4 ++
drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 3 +-
drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 72 ++++++++++++++++++++++++++++
drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 2 +
8 files changed, 128 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/dwc_otg/Makefile
+++ b/drivers/usb/host/dwc_otg/Makefile
@@ -37,7 +37,10 @@ dwc_otg-objs += dwc_otg_pcd_linux.o dwc_
dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o
dwc_otg-objs += dwc_otg_adp.o
dwc_otg-objs += dwc_otg_fiq_fsm.o
+ifneq ($(CONFIG_ARM64),y)
dwc_otg-objs += dwc_otg_fiq_stub.o
+endif
+
ifneq ($(CFI),)
dwc_otg-objs += dwc_otg_cfi.o
endif
--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c
@@ -74,6 +74,21 @@ void notrace _fiq_print(enum fiq_debug_l
}
}
+
+#ifdef CONFIG_ARM64
+
+inline void fiq_fsm_spin_lock(fiq_lock_t *lock)
+{
+ spin_lock((spinlock_t *)lock);
+}
+
+inline void fiq_fsm_spin_unlock(fiq_lock_t *lock)
+{
+ spin_unlock((spinlock_t *)lock);
+}
+
+#else
+
/**
* fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock
* Must be called with local interrupts and FIQ disabled.
@@ -122,6 +137,8 @@ inline void fiq_fsm_spin_unlock(fiq_lock
inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { }
#endif
+#endif
+
/**
* fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction
* @channel: channel to re-enable
--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h
+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h
@@ -127,6 +127,12 @@ enum fiq_debug_level {
FIQDBG_PORTHUB = (1 << 3),
};
+#ifdef CONFIG_ARM64
+
+typedef spinlock_t fiq_lock_t;
+
+#else
+
typedef struct {
union {
uint32_t slock;
@@ -137,6 +143,8 @@ typedef struct {
};
} fiq_lock_t;
+#endif
+
struct fiq_state;
extern void _fiq_print (enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...);
@@ -355,6 +363,22 @@ struct fiq_state {
struct fiq_channel_state channel[0];
};
+#ifdef CONFIG_ARM64
+
+#ifdef local_fiq_enable
+#undef local_fiq_enable
+#endif
+
+#ifdef local_fiq_disable
+#undef local_fiq_disable
+#endif
+
+extern void local_fiq_enable(void);
+
+extern void local_fiq_disable(void);
+
+#endif
+
extern void fiq_fsm_spin_lock(fiq_lock_t *lock);
extern void fiq_fsm_spin_unlock(fiq_lock_t *lock);
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
@@ -1021,6 +1021,10 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd
}
DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels)));
+#ifdef CONFIG_ARM64
+ spin_lock_init(&hcd->fiq_state->lock);
+#endif
+
for (i = 0; i < num_channels; i++) {
hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH;
}
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
@@ -116,7 +116,11 @@ extern int32_t dwc_otg_hcd_handle_intr(d
/** This function is used to handle the fast interrupt
*
*/
+#ifdef CONFIG_ARM64
+extern void dwc_otg_hcd_handle_fiq(void);
+#else
extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void);
+#endif
/**
* Returns private data set by
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
@@ -36,8 +36,9 @@
#include "dwc_otg_regs.h"
#include <linux/jiffies.h>
+#ifdef CONFIG_ARM
#include <asm/fiq.h>
-
+#endif
extern bool microframe_schedule;
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
@@ -51,7 +51,9 @@
#include <linux/dma-mapping.h>
#include <linux/version.h>
#include <asm/io.h>
+#ifdef CONFIG_ARM
#include <asm/fiq.h>
+#endif
#include <linux/usb.h>
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)
#include <../drivers/usb/core/hcd.h>
@@ -71,6 +73,13 @@
#include "dwc_otg_driver.h"
#include "dwc_otg_hcd.h"
+#ifndef __virt_to_bus
+#define __virt_to_bus __virt_to_phys
+#define __bus_to_virt __phys_to_virt
+#define __pfn_to_bus(x) __pfn_to_phys(x)
+#define __bus_to_pfn(x) __phys_to_pfn(x)
+#endif
+
extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end;
/**
@@ -393,14 +402,49 @@ static struct dwc_otg_hcd_function_ops h
.get_b_hnp_enable = _get_b_hnp_enable,
};
+#ifdef CONFIG_ARM64
+
+static int simfiq_irq = -1;
+
+void local_fiq_enable(void)
+{
+ if (simfiq_irq >= 0)
+ enable_irq(simfiq_irq);
+}
+
+void local_fiq_disable(void)
+{
+ if (simfiq_irq >= 0)
+ disable_irq(simfiq_irq);
+}
+
+irqreturn_t fiq_irq_handler(int irq, void *dev_id)
+{
+ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)dev_id;
+
+ if (fiq_fsm_enable)
+ dwc_otg_fiq_fsm(dwc_otg_hcd->fiq_state, dwc_otg_hcd->core_if->core_params->host_channels);
+ else
+ dwc_otg_fiq_nop(dwc_otg_hcd->fiq_state);
+
+ return IRQ_HANDLED;
+}
+
+#else
static struct fiq_handler fh = {
.name = "usb_fiq",
};
+#endif
+
static void hcd_init_fiq(void *cookie)
{
dwc_otg_device_t *otg_dev = cookie;
dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd;
+#ifdef CONFIG_ARM64
+ int retval = 0;
+ int irq;
+#else
struct pt_regs regs;
int irq;
@@ -428,6 +472,7 @@ static void hcd_init_fiq(void *cookie)
// __show_regs(&regs);
set_fiq_regs(&regs);
+#endif
//Set the mphi periph to the required registers
dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base;
@@ -446,6 +491,23 @@ static void hcd_init_fiq(void *cookie)
DWC_WARN("MPHI periph has NOT been enabled");
#endif
// Enable FIQ interrupt from USB peripheral
+#ifdef CONFIG_ARM64
+ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1);
+
+ if (irq < 0) {
+ DWC_ERROR("Can't get SIM-FIQ irq");
+ return;
+ }
+
+ retval = request_irq(irq, fiq_irq_handler, 0, "dwc_otg_sim-fiq", dwc_otg_hcd);
+
+ if (retval < 0) {
+ DWC_ERROR("Unable to request SIM-FIQ irq\n");
+ return;
+ }
+
+ simfiq_irq = irq;
+#else
#ifdef CONFIG_MULTI_IRQ_HANDLER
irq = platform_get_irq(otg_dev->os_dep.platformdev, 1);
#else
@@ -457,6 +519,8 @@ static void hcd_init_fiq(void *cookie)
}
enable_fiq(irq);
local_fiq_enable();
+#endif
+
}
/**
@@ -519,6 +583,13 @@ int hcd_init(dwc_bus_dev_t *_dev)
otg_dev->hcd = dwc_otg_hcd;
otg_dev->hcd->otg_dev = otg_dev;
+#ifdef CONFIG_ARM64
+ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if))
+ goto error2;
+
+ if (fiq_enable)
+ hcd_init_fiq(otg_dev);
+#else
if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) {
goto error2;
}
@@ -531,6 +602,7 @@ int hcd_init(dwc_bus_dev_t *_dev)
smp_call_function_single(0, hcd_init_fiq, otg_dev, 1);
}
}
+#endif
hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel)
--- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
@@ -76,8 +76,10 @@
#ifdef PLATFORM_INTERFACE
#include <linux/platform_device.h>
+#ifdef CONFIG_ARM
#include <asm/mach/map.h>
#endif
+#endif
/** The OS page size */
#define DWC_OS_PAGE_SIZE PAGE_SIZE
Reference in New Issue View Git Blame Copy Permalink