mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-08 22:12:49 +00:00
ca5c695a45
Deleted following upstreamed patches: bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch Manually rebased following patches: bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch Runtime tested on turris-omnia and glinet-b1300. Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200] Signed-off-by: Petr Štetiar <ynezz@true.cz>
28 lines
1001 B
Diff
28 lines
1001 B
Diff
From 96a858966375106d5ddaa1090b5a35cebfa5b6e8 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Tue, 19 May 2020 16:20:30 +0100
|
|
Subject: [PATCH] drm/vc4: Add FKMS as an acceptable node for dma
|
|
ranges.
|
|
|
|
Under FKMS, the firmware (via FKMS) also requires the VideoCore cache
|
|
aliases for image planes, as defined by the dma-ranges under /soc.
|
|
|
|
Add rpi-firmware-kms to the list of acceptable nodes to look for
|
|
to copy dma config from.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
drivers/gpu/drm/vc4/vc4_drv.c | 1 +
|
|
1 file changed, 1 insertion(+)
|
|
|
|
--- a/drivers/gpu/drm/vc4/vc4_drv.c
|
|
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
|
|
@@ -227,6 +227,7 @@ static const struct of_device_id vc4_dma
|
|
|
|
const struct of_device_id vc4_dma_range_matches[] = {
|
|
{ .compatible = "brcm,bcm2835-hvs" },
|
|
+ { .compatible = "raspberrypi,rpi-firmware-kms" },
|
|
{ .compatible = "brcm,bcm2835-v3d" },
|
|
{ .compatible = "brcm,cygnus-v3d" },
|
|
{ .compatible = "brcm,vc4-v3d" },
|