openwrt/target/linux/ar71xx/image
张鹏 53a4502013 ar71xx:add support for E750G v8
Qxwlan E750G v8 is based on Qualcomm QCA9344.

Specification:

 - 560/450/225 MHz (CPU/DDR/AHB)
 - 128 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 2T2R 2.4G GHz (AR9344)
 - 2x 10/100 Mbps Ethernet (PoE support)
 - 2x 10/100/1000 Mbps Ethernet
 - 7x LED (6 driven by GPIO)
 - 1x button (reset)
 - 1x DC jack for main power input (9-48 V)
 - UART (J23) and LEDs (J2) headers on PCB

Flash instruction (using U-Boot CLI and tftp server):

 - Configure PC with static IP 192.168.1.10 and tftp server.
 - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
   server directory.
 - Connect PC with one of RJ45 ports, power up the board and press
   "enter" key to access U-Boot CLI.
 - Use the following command to update the device to OpenWrt: "run lfw".

Flash instruction (using U-Boot web-based recovery):

 - Configure PC with static IP 192.168.1.xxx(2-254)/24.
 - Connect PC with one of RJ45 ports, press the reset button, power up
   the board and keep button pressed for around 6-7 seconds, until LEDs
   start flashing.
 - Open your browser and enter 192.168.1.1, select "sysupgrade" image
   and click the upgrade button.

Signed-off-by: 张鹏 <sd20@qxwlan.com>
2018-07-30 10:43:36 +02:00
..
lzma-loader ar71xx: lzma-loader: constify kernel argv array 2018-06-06 22:25:52 +02:00
common-tp-link.mk ar71xx: factor out safe loader image build code 2018-07-07 21:07:40 +02:00
generic-legacy-devices.mk ar71xx: Move F9K1115v2 under ar71xx tiny target 2018-07-16 15:12:19 +02:00
generic-senao.mk ar71xx: add support for OCEDO Koala 2018-06-07 09:31:58 +02:00
generic-tp-link.mk ar71xx: factor out safe loader image build code 2018-07-07 21:07:40 +02:00
generic-ubnt.mk ar71xx: Ubiquiti Airmax M: add relocate-kernel to invalidate cache 2018-04-26 20:40:07 +02:00
generic.mk ar71xx:add support for E750G v8 2018-07-30 10:43:36 +02:00
legacy.mk ar71xx: Move F9K1115v2 under ar71xx tiny target 2018-07-16 15:12:19 +02:00
Makefile ar71xx: move boards to tiny subtarget 2018-07-12 18:15:19 +02:00
mikrotik.mk ar71xx: add support for MikroTik RB931-2nD 2018-07-16 15:12:17 +02:00
nand.mk ar71xx: add support for Nokia WI2A-AC200i 2017-10-19 12:27:42 +02:00
tiny-legacy-devices.mk ar71xx: Move F9K1115v2 under ar71xx tiny target 2018-07-16 15:12:19 +02:00
tiny-tp-link.mk ar71xx: factor out safe loader image build code 2018-07-07 21:07:40 +02:00
tiny.mk ar71xx: move boards to tiny subtarget 2018-07-12 18:15:19 +02:00
ubinize-nbg6716.ini ar71xx: nbg6716: Enable procd nand sysupgrage 2014-06-26 11:43:38 +00:00
ubinize-wndr4300.ini ar71xx: remove old jffs2 marker from image generation on nand targets 2014-06-24 18:14:18 +00:00