openwrt/target/linux/ipq40xx
Kuan-Yi Li f1525e785e kernel: backport GD25Q256 support from 4.15
Backport below changes for GigaDevice GD25Q256 support from v4.15:

  e27072851bf7 mtd: spi-nor: add a quad_enable callback in struct flash_info
  65153846b18c mtd: spi-nor: add support for GD25Q256

This chip is used on newer Quad-E4G boards.

Before:

[    2.366493] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 19
[    2.372853] m25p80: probe of spi0.0 failed with error -2

After:

[    2.371722] m25p80 spi0.0: gd25q256 (32768 Kbytes)
[    2.376694] 5 fixed-partitions partitions found on MTD device spi0.0
[    2.383043] Creating 5 MTD partitions on "spi0.0":
[    2.387824] 0x000000000000-0x000000030000 : "u-boot"
[    2.394138] 0x000000030000-0x000000031000 : "u-boot-env"
[    2.400608] 0x000000031000-0x000000040000 : "config"
[    2.406830] 0x000000040000-0x000000050000 : "factory"
[    2.413169] 0x000000050000-0x000002000000 : "firmware"

Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2020-12-01 21:59:30 +01:00
..
base-files ipq40xx: add support for AVM FRITZ!Repeater 1200 2019-11-22 22:32:58 +01:00
files-4.14/arch/arm/boot/dts ipq40xx: add support for AVM FRITZ!Repeater 1200 2019-11-22 22:32:58 +01:00
generic ipqx0xx: add Generic subtarget 2019-11-03 22:26:07 +01:00
image ipq40xx: use ath10k-ct-smallbuffers for 128 MiB devices 2019-12-26 16:19:58 +01:00
patches-4.14 kernel: backport GD25Q256 support from 4.15 2020-12-01 21:59:30 +01:00
profiles ipq40xx: add target 2018-03-14 19:04:50 +01:00
config-4.14 ipq40xx: add support for ASUS Lyra 2019-02-14 16:56:15 +01:00
Makefile ipqx0xx: add Generic subtarget 2019-11-03 22:26:07 +01:00