openwrt/target/linux/ar71xx
Robert Marko 99f6f2c0b8 ar71xx: Add support for TP-Link CPE210 v3
Looks identical to the v2.

This PR adds support for a popular low-cost 2.4GHz N based AP

Specifications:
 - SoC: Qualcomm Atheros QCA9533 (650MHz)
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 2.4GHz N based built into SoC 2x2
 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Robert Marko <robimarko@gmail.com>
[Rebased, adjusted for separate tplink-safeloader entry, dynamic partitioning]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-04-02 02:09:58 +02:00
..
base-files ar71xx: Add support for TP-Link CPE210 v3 2019-04-02 02:09:58 +02:00
files ar71xx: Add support for TP-Link CPE210 v3 2019-04-02 02:09:58 +02:00
generic ar71xx: add support for Gainstrong MiniBox V3.2 2018-11-15 19:49:51 +01:00
image ar71xx: Add support for TP-Link CPE210 v3 2019-04-02 02:09:58 +02:00
mikrotik treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
nand treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.107 2019-03-22 18:14:28 +01:00
tiny ar71xx: move OCEDO Koala to generic and use dynamic partitioning 2018-10-29 11:21:23 +01:00
config-4.14 ar71xx: add support for Gainstrong MiniBox V3.2 2018-11-15 19:49:51 +01:00
Makefile treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
modules.mk ar71xx: add LED driver NU801 2015-12-11 15:04:57 +00:00