mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
c90e521790
- remove common imx6q-ventana.dtsi - there isn't enough commonality to warrent this - rename user led's to 1-based - add alises used by bootloader - clean up iomux gpios - fix pfuze slave address - enable sata - add delay after release of pci reset downstream from PCIe switch - remove PCIe clock configuration as its now handled in updated driver Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38081
195 lines
4.7 KiB
Diff
195 lines
4.7 KiB
Diff
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
|
|
imx6dl-sabresd.dtb \
|
|
imx6dl-wandboard.dtb \
|
|
imx6q-arm2.dtb \
|
|
+ imx6q-gw5400-a.dtb \
|
|
imx6q-sabreauto.dtb \
|
|
imx6q-sabrelite.dtb \
|
|
imx6q-sabresd.dtb \
|
|
--- a/arch/arm/boot/dts/imx6q.dtsi
|
|
+++ b/arch/arm/boot/dts/imx6q.dtsi
|
|
@@ -98,6 +98,14 @@
|
|
MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
|
|
>;
|
|
};
|
|
+
|
|
+ pinctrl_audmux_3: audmux-3 {
|
|
+ fsl,pins = <
|
|
+ MX6Q_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
|
|
+ MX6Q_PAD_EIM_D25__AUD5_RXC 0x80000000
|
|
+ MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
|
|
+ >;
|
|
+ };
|
|
};
|
|
|
|
ecspi1 {
|
|
@@ -187,6 +195,30 @@
|
|
MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1
|
|
>;
|
|
};
|
|
+
|
|
+ /* No strobe */
|
|
+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
|
|
+ fsl,pins = <
|
|
+ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
|
+ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
|
+ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
|
+ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
|
+ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
|
+ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
|
|
+ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
|
|
+ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
|
|
+ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
|
+ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
|
+ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
|
+ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
|
+ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
|
+ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
|
+ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
|
+ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
|
+ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
|
+ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
|
+ >;
|
|
+ };
|
|
};
|
|
|
|
i2c1 {
|
|
@@ -205,6 +237,12 @@
|
|
MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
+ pinctrl_i2c2_2: i2c2grp-2 {
|
|
+ fsl,pins = <
|
|
+ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
+ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
+ >;
|
|
+ };
|
|
};
|
|
|
|
i2c3 {
|
|
@@ -214,6 +252,12 @@
|
|
MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
+ pinctrl_i2c3_2: i2c3grp-2 {
|
|
+ fsl,pins = <
|
|
+ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
|
+ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
+ >;
|
|
+ };
|
|
};
|
|
|
|
uart1 {
|
|
@@ -223,6 +267,12 @@
|
|
MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
+ pinctrl_uart1_2: uart1grp-2 {
|
|
+ fsl,pins = <
|
|
+ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
|
+ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
};
|
|
|
|
uart2 {
|
|
@@ -232,6 +282,21 @@
|
|
MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
+ pinctrl_uart2_2: uart2grp-2 {
|
|
+ fsl,pins = <
|
|
+ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
|
+ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ uart3 {
|
|
+ pinctrl_uart3_1: uart3grp-1 {
|
|
+ fsl,pins = <
|
|
+ MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
|
|
+ MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
};
|
|
|
|
uart4 {
|
|
@@ -242,6 +307,15 @@
|
|
>;
|
|
};
|
|
};
|
|
+
|
|
+ uart5 {
|
|
+ pinctrl_uart5_1: uart5grp-1 {
|
|
+ fsl,pins = <
|
|
+ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
|
+ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+ };
|
|
|
|
usbotg {
|
|
pinctrl_usbotg_1: usbotggrp-1 {
|
|
--- a/arch/arm/mach-imx/mach-imx6q.c
|
|
+++ b/arch/arm/mach-imx/mach-imx6q.c
|
|
@@ -25,6 +25,7 @@
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/opp.h>
|
|
+#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/micrel_phy.h>
|
|
@@ -145,6 +146,38 @@ static void __init imx6q_sabrelite_init(
|
|
imx6q_sabrelite_cko1_setup();
|
|
}
|
|
|
|
+/*
|
|
+ * fixup for PEX 8909 bridge to configure GPIO1-7 as output High
|
|
+ * as they are used for slots1-7 PERST#
|
|
+ */
|
|
+static void mx6_ventana_pciesw_early_fixup(struct pci_dev *dev)
|
|
+{
|
|
+ u32 dw;
|
|
+
|
|
+ if (!of_machine_is_compatible("gw,ventana"))
|
|
+ return;
|
|
+
|
|
+ if (dev->devfn != 0)
|
|
+ return;
|
|
+
|
|
+ pci_read_config_dword(dev, 0x62c, &dw);
|
|
+ dw |= 0xaaa8; // GPIO1-7 outputs
|
|
+ pci_write_config_dword(dev, 0x62c, dw);
|
|
+
|
|
+ pci_read_config_dword(dev, 0x644, &dw);
|
|
+ dw |= 0xfe; // GPIO1-7 output high
|
|
+ pci_write_config_dword(dev, 0x644, dw);
|
|
+
|
|
+ mdelay(1);
|
|
+}
|
|
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609,
|
|
+ mx6_ventana_pciesw_early_fixup);
|
|
+
|
|
+static void __init imx6q_ventana_init(void)
|
|
+{
|
|
+ imx6q_sabrelite_cko1_setup();
|
|
+}
|
|
+
|
|
static void __init imx6q_1588_init(void)
|
|
{
|
|
struct regmap *gpr;
|
|
@@ -163,6 +196,9 @@ static void __init imx6q_usb_init(void)
|
|
|
|
static void __init imx6q_init_machine(void)
|
|
{
|
|
+ if (of_machine_is_compatible("gw,ventana"))
|
|
+ imx6q_ventana_init();
|
|
+
|
|
if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
|
|
imx6q_sabrelite_init();
|
|
|