ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-10 06:52:53 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
62,911 Commits 9 Branches 77 Tags 905 MiB
C 61.2%
Makefile 19.3%
Shell 6.9%
Roff 6.7%
Perl 2.5%
Other 3.2%
c8ea1aa970
Go to file
Evan Jobling c8ea1aa970
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Details
realtek: add support for HPE 1920-24G-PoE-370w 
Hardware information:
---------------------

The HPE 1920-24G-PoE+ (370W) (JG926A) is a switch that is
part of the 1920 family wich 370W nominal PoE+ support.

Common with HPE 1920-24G:
  - RTL8382 SoC
  - 24 Gigabit RJ45 ports (built-in RTL8218B, 2 external RTL8218D)
  - 4 SFP ports (external RTL8214FC)
  - RJ45 RS232 port on front panel
  - 32 MiB NOR Flash
  - 128 MiB DDR3 DRAM
  - PT7A7514 watchdog

HPE 1920-24G-PoE+ (370W):
  - PoE chip
  - 3 fans (40mm)

Known issues:
---------------------
- PoE LEDs are uncontrolled.

(Manual taken from f2f09bc)
Booting initramfs image:
------------------------

- Prepare a FTP or TFTP server serving the OpenWrt initramfs image and
  connect the server to a switch port.

- Connect to the console port of the device and enter the extended
  boot menu by typing Ctrl+B when prompted.

- Choose the menu option "<3> Enter Ethernet SubMenu".

- Set network parameters via the option "<5> Modify Ethernet Parameter".
  Enter the FTP/TFTP filename as "Load File Name" ("Target File Name"
  can be left blank, it is not required for booting from RAM). Note that
  the configuration is saved on flash, so it only needs to be done once.

- Select "<1> Download Application Program To SDRAM And Run".

Initial installation:
---------------------

- Boot an initramfs image as described above, then use sysupgrade to
  install OpenWrt permanently. After initial installation, the
  bootloader needs to be configured to load the correct image file

- Enter the extended boot menu again and choose "<4> File Control",
  then select "<2> Set Application File type".

- Enter the number of the file "openwrt-kernel.bin" (should be 1), and
  use the option "<1> +Main" to select it as boot image.

- Choose "<0> Exit To Main Menu" and then "<1> Boot System".

NOTE: The bootloader on these devices can only boot from the VFS
filesystem which normally spans most of the flash. With OpenWrt, only
the first part of the firmware partition contains a valid filesystem,
the rest is used for rootfs. As the bootloader does not know about this,
you must not do any file operations in the bootloader, as this may
corrupt the OpenWrt installation (selecting the boot image is an
exception, as it only stores a flag in the bootloader data, but doesn't
write to the filesystem).

Example PoE config file (/etc/config/poe):
---------------------
config global
        option budget   '370'

config port
        option enable   '1'
        option id       '1'
        option name     'lan8'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '2'
        option name     'lan7'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '3'
        option name     'lan6'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '4'
        option name     'lan5'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '5'
        option name     'lan4'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '6'
        option name     'lan3'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '7'
        option name     'lan2'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '8'
        option name     'lan1'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '9'
        option name     'lan16'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '10'
        option name     'lan15'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '11'
        option name     'lan14'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '12'
        option name     'lan13'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '13'
        option name     'lan12'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '14'
        option name     'lan11'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '15'
        option name     'lan10'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '16'
        option name     'lan9'
        option poe_plus '1'
        option priority '2'

config port
        option enable   '1'
        option id       '17'
        option name     'lan24'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '18'
        option name     'lan23'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '19'
        option name     'lan22'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '20'
        option name     'lan21'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '21'
        option name     'lan20'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '22'
        option name     'lan19'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '23'
        option name     'lan18'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '24'
        option name     'lan17'
        option poe_plus '1'
        option priority '2'

Signed-off-by: Evan Jobling <evan.jobling@mslsc.com.au>
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Link: https://github.com/openwrt/openwrt/pull/17436
[fix space indentation in DTS]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2024-12-31 08:34:38 +01:00
.devcontainer/ci-env devcontainer: Add development environment for gihub codespace 2023-10-30 23:34:26 +01:00
.github CI: labeler: Add stm32 target 2024-11-24 22:51:14 +01:00
.vscode meta: VS Code: add "Git: Always Sign Off" setting 2024-10-03 17:18:51 +02:00
config netfilter: add kmod-nfnetlink-ct{helper,timeout} 2024-12-23 23:37:57 +01:00
include kernel: bump 6.6 to 6.6.68 2024-12-30 01:55:41 +01:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package mt76: update to Git HEAD (2024-12-30) 2024-12-30 21:28:09 +01:00
scripts target/metadata: set OpenWrt One as the default menuconfig target/profile 2024-12-02 13:55:36 +01:00
target realtek: add support for HPE 1920-24G-PoE-370w 2024-12-31 08:34:38 +01:00
toolchain toolchain/binutils: remove old versions 2024-10-12 22:12:39 +02:00
tools tools/dwarves: update to v1.28 2024-12-28 15:41:44 +01:00
.gitattributes .gitattributes: ignore some whitespace "violations" in .patch files 2024-12-12 11:01:56 +01:00
.gitignore gitignore: ignore local APK keys 2024-05-17 22:03:06 +03:00
BSDmakefile
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default feeds.conf.default: enable video feed by default 2024-12-05 01:34:01 +00:00
Makefile build: include tests/Makefile if available 2024-06-17 17:51:31 +02:00
README.md README: replace "MacOSX" with "macOS" 2024-04-01 18:46:30 +02:00
rules.mk rules.mk: Update ccache's compiler check. 2024-12-12 11:01:56 +01:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0