openwrt/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts
Adrian Schmutzler e7bfda2c24 brcm63xx: rename target to bcm63xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-14 14:10:51 +01:00

93 lines
1.5 KiB
Plaintext

/dts-v1/;
#include "bcm6368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend VR-3026e";
compatible = "comtrend,vr-3026e", "brcm,bcm6368";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
dsl_green {
label = "VR-3026e:green:dsl";
gpios = <&pinctrl 2 1>;
};
inet_green {
label = "VR-3026e:green:inet";
gpios = <&pinctrl 5 0>;
};
power_green {
label = "VR-3026e:green:power";
gpios = <&pinctrl 22 0>;
default-state = "on";
};
power_red {
label = "VR-3026e:red:power";
gpios = <&pinctrl 24 0>;
};
inet_red {
label = "VR-3026e:red:inet";
gpios = <&pinctrl 31 0>;
};
};
};
&pflash {
status = "ok";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
&pinctrl_ephy2_led &pinctrl_ephy3_led>;
};
&uart0 {
status = "ok";
};