Hauke Mehrtens c78e4fb220 brcm47xx: Add support for Huawei E970 ... This patch adds support for Huawei E970 wireless gateway devices. It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV. E960/B970 should work too, from what I know it's basically the same hardware. The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem. It uses a hardware watchdog which needs GPIO-7 to be toggled at least every 1-2 seconds. This patch uses gpio_wdt module (see my previous patch today) to take care of this. Tested and works: 3G wan, wlan+LED, VLAN config, failsafe using reset button, image to be used for upgrade from OEM firmware's web interface Link to the wiki page I've created: <http://wiki.openwrt.org/toh/huawei/e970> Issue: * lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog reset during kernel decompress. Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de> SVN-Revision: 38011		2013-09-16 21:09:10 +00:00
..
imagebuilder	build: consistently use 'depends on' instead of 'depends'	2013-04-17 15:36:41 +00:00
linux	brcm47xx: Add support for Huawei E970	2013-09-16 21:09:10 +00:00
sdk	build: consistently use 'depends on' instead of 'depends'	2013-04-17 15:36:41 +00:00
toolchain	build: consistently use 'depends on' instead of 'depends'	2013-04-17 15:36:41 +00:00
Config.in	kernel: add a new global config symbol for enabling rfkill support (can be enabled by default via target feature flag)	2013-07-21 11:55:30 +00:00
Makefile	target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install	2012-06-06 17:24:05 +00:00