Stijn Segers ad5e29d38a ramips: remove factory image for TP-Link Archer C2 v1 ... Initial commit 8375623a06 ("ramips: add support for TP-Link Archer C2") contains detailed installation instructions, which do not mention a factory image. From what I can see, no support to install OpenWrt through the vendor web interface has been added since. The factory image is also conspicuously absent from the device page in the wiki. Yet, it is available for download. I bricked my Archer C2 loading the factory image through the web UI. Serial showed this error during bootloop: Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover This patch disables the undocumented factory image so users won't get tricked into thinking easy web UI flashing actually works. Signed-off-by: Stijn Segers <foss@volatilesystems.org>		2021-02-13 21:21:01 +01:00
..
lzma-loader	ramips: lzma-loader: make FLASH_START configurable	2020-09-03 14:15:30 +02:00
common-tp-link.mk	treewide: omit IMAGE_SIZE argument from check-size	2020-03-21 20:02:55 +01:00
Makefile	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
mt76x8.mk	ramips: add support for ELECOM WRC-1167FS	2021-02-11 16:37:53 +01:00
mt7620.mk	ramips: remove factory image for TP-Link Archer C2 v1	2021-02-13 21:21:01 +01:00
mt7621.mk	ramips: add support for Cudy WR1300	2021-02-09 13:58:18 +01:00
rt288x.mk	ramips: tidy up image subtarget Makefiles	2020-05-08 18:58:39 +02:00
rt305x.mk	ramips: disable default build for HooToo HT-TM02	2021-02-07 22:06:57 +01:00
rt3883.mk	ramips: add support for Senao Engenius ESR600H	2020-12-22 19:11:50 +01:00