mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
7bbf4117c6
This add support for kernel 4.9 to the ar71xx target. It was compile tested with the generic, NAND and mikrotik subtarget. Multiple members of the community tested it on their boards and did not report any major problem so far. Especially the NAND part received some changes to adapt to the new kernel APIs. The serial driver hack used for the Arduino Yun was not ported because the kernel changed there a lot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
205 lines
5.5 KiB
Diff
205 lines
5.5 KiB
Diff
--- a/arch/mips/ath79/mach-db120.c
|
|
+++ b/arch/mips/ath79/mach-db120.c
|
|
@@ -2,7 +2,7 @@
|
|
* Atheros DB120 reference board support
|
|
*
|
|
* Copyright (c) 2011 Qualcomm Atheros
|
|
- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
|
|
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
@@ -19,16 +19,26 @@
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
+#include <linux/phy.h>
|
|
+#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
+#include <linux/ar8216_platform.h>
|
|
|
|
-#include "machtypes.h"
|
|
+#include <asm/mach-ath79/ar71xx_regs.h>
|
|
+
|
|
+#include "common.h"
|
|
+#include "dev-ap9x-pci.h"
|
|
+#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
+#include "dev-m25p80.h"
|
|
+#include "dev-nfc.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
-#include "pci.h"
|
|
+#include "machtypes.h"
|
|
|
|
+#define DB120_GPIO_LED_USB 11
|
|
#define DB120_GPIO_LED_WLAN_5G 12
|
|
#define DB120_GPIO_LED_WLAN_2G 13
|
|
#define DB120_GPIO_LED_STATUS 14
|
|
@@ -39,8 +49,10 @@
|
|
#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
|
|
|
|
-#define DB120_WMAC_CALDATA_OFFSET 0x1000
|
|
-#define DB120_PCIE_CALDATA_OFFSET 0x5000
|
|
+#define DB120_MAC0_OFFSET 0
|
|
+#define DB120_MAC1_OFFSET 6
|
|
+#define DB120_WMAC_CALDATA_OFFSET 0x1000
|
|
+#define DB120_PCIE_CALDATA_OFFSET 0x5000
|
|
|
|
static struct gpio_led db120_leds_gpio[] __initdata = {
|
|
{
|
|
@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
|
|
.gpio = DB120_GPIO_LED_WLAN_2G,
|
|
.active_low = 1,
|
|
},
|
|
+ {
|
|
+ .name = "db120:green:usb",
|
|
+ .gpio = DB120_GPIO_LED_USB,
|
|
+ .active_low = 1,
|
|
+ }
|
|
};
|
|
|
|
static struct gpio_keys_button db120_gpio_keys[] __initdata = {
|
|
@@ -76,60 +93,85 @@ static struct gpio_keys_button db120_gpi
|
|
},
|
|
};
|
|
|
|
-static struct spi_board_info db120_spi_info[] = {
|
|
- {
|
|
- .bus_num = 0,
|
|
- .chip_select = 0,
|
|
- .max_speed_hz = 25000000,
|
|
- .modalias = "s25sl064a",
|
|
- }
|
|
+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
|
|
+ .mode = AR8327_PAD_MAC_RGMII,
|
|
+ .txclk_delay_en = true,
|
|
+ .rxclk_delay_en = true,
|
|
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
};
|
|
|
|
-static struct ath79_spi_platform_data db120_spi_data = {
|
|
- .bus_num = 0,
|
|
- .num_chipselect = 1,
|
|
+static struct ar8327_led_cfg db120_ar8327_led_cfg = {
|
|
+ .led_ctrl0 = 0x00000000,
|
|
+ .led_ctrl1 = 0xc737c737,
|
|
+ .led_ctrl2 = 0x00000000,
|
|
+ .led_ctrl3 = 0x00c30c00,
|
|
+ .open_drain = true,
|
|
};
|
|
|
|
-#ifdef CONFIG_PCI
|
|
-static struct ath9k_platform_data db120_ath9k_data;
|
|
-
|
|
-static int db120_pci_plat_dev_init(struct pci_dev *dev)
|
|
-{
|
|
- switch (PCI_SLOT(dev->devfn)) {
|
|
- case 0:
|
|
- dev->dev.platform_data = &db120_ath9k_data;
|
|
- break;
|
|
- }
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static void __init db120_pci_init(u8 *eeprom)
|
|
-{
|
|
- memcpy(db120_ath9k_data.eeprom_data, eeprom,
|
|
- sizeof(db120_ath9k_data.eeprom_data));
|
|
+static struct ar8327_platform_data db120_ar8327_data = {
|
|
+ .pad0_cfg = &db120_ar8327_pad0_cfg,
|
|
+ .port0_cfg = {
|
|
+ .force_link = 1,
|
|
+ .speed = AR8327_PORT_SPEED_1000,
|
|
+ .duplex = 1,
|
|
+ .txpause = 1,
|
|
+ .rxpause = 1,
|
|
+ },
|
|
+ .led_cfg = &db120_ar8327_led_cfg,
|
|
+};
|
|
|
|
- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
|
|
- ath79_register_pci();
|
|
-}
|
|
-#else
|
|
-static inline void db120_pci_init(u8 *eeprom) {}
|
|
-#endif /* CONFIG_PCI */
|
|
+static struct mdio_board_info db120_mdio0_info[] = {
|
|
+ {
|
|
+ .bus_id = "ag71xx-mdio.0",
|
|
+ .phy_addr = 0,
|
|
+ .platform_data = &db120_ar8327_data,
|
|
+ },
|
|
+};
|
|
|
|
static void __init db120_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
|
|
+ ath79_register_m25p80(NULL);
|
|
+
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
|
|
db120_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(db120_gpio_keys),
|
|
db120_gpio_keys);
|
|
- ath79_register_spi(&db120_spi_data, db120_spi_info,
|
|
- ARRAY_SIZE(db120_spi_info));
|
|
ath79_register_usb();
|
|
ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
|
|
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
|
|
+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
|
|
+
|
|
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
|
+ AR934X_ETH_CFG_SW_ONLY_MODE);
|
|
+
|
|
+ ath79_register_mdio(1, 0x0);
|
|
+ ath79_register_mdio(0, 0x0);
|
|
+
|
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
|
|
+
|
|
+ mdiobus_register_board_info(db120_mdio0_info,
|
|
+ ARRAY_SIZE(db120_mdio0_info));
|
|
+
|
|
+ /* GMAC0 is connected to an AR8327 switch */
|
|
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
+ ath79_eth0_data.phy_mask = BIT(0);
|
|
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
|
+ ath79_register_eth(0);
|
|
+
|
|
+ /* GMAC1 is connected to the internal switch */
|
|
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
|
|
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
+ ath79_eth1_data.speed = SPEED_1000;
|
|
+ ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
+
|
|
+ ath79_register_eth(1);
|
|
+
|
|
+ ath79_register_nfc();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
|
|
--- a/arch/mips/ath79/Kconfig
|
|
+++ b/arch/mips/ath79/Kconfig
|
|
@@ -42,9 +42,12 @@ config ATH79_MACH_AP81
|
|
config ATH79_MACH_DB120
|
|
bool "Atheros DB120 reference board"
|
|
select SOC_AR934X
|
|
+ select ATH79_DEV_AP9X_PCI if PCI
|
|
+ select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
- select ATH79_DEV_SPI
|
|
+ select ATH79_DEV_M25P80
|
|
+ select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
help
|