Christian Lamparter 80d34d9d59 ipq40xx: document pcie wifi chip on the GL.Inet GL-B2200 ... Enrico provided a bootlog that shows the chip is a WAVE-2 QCA9888v2: > pci 0000:01:00.0: [168c:0056] type 00 class 0x028000 > [...] > ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56. > ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 [...] chip_id 0x00000000 sub 0000:0000 > ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9888-fW-13-5ae337bb1 api 5 features mfp,[...] > ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 6535d835 > ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 32 raw 0 hwcrypto 1 this patch switches the device over to pre-calibration. (this is more or less cosmetic) Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>		2022-02-19 18:29:42 +01:00
..
base-files	ipq40xx: add Linksys MR8300 WAN port	2022-02-05 00:44:35 +01:00
files	ipq40xx: document pcie wifi chip on the GL.Inet GL-B2200	2022-02-19 18:29:42 +01:00
files-5.10/drivers/net/mdio	ipq40xx: 5.10: move AR40xx to MDIO drivers	2021-09-25 19:28:54 +02:00
generic	ipq40xx: add support for GL.iNet GL-B2200	2021-12-02 20:43:07 +00:00
image	ipq40xx: add support for ZTE MF286D	2022-02-05 00:44:35 +01:00
mikrotik	mikrotik: enable variable size erase	2022-01-13 09:33:29 +01:00
patches-5.10	kernel: bump 5.10 to 5.10.100	2022-02-11 23:17:40 +01:00
config-5.10	ipq40xx: add support for ZTE MF286D	2022-02-05 00:44:35 +01:00
Makefile	ipq40xx: switch to kernel 5.10	2021-11-03 23:50:56 +01:00