openwrt/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts
Piotr Dymacz c568c6dc09 ipq40xx: add support for ALFA Network AP120C-AC
ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm
IPQ4018 + QCA8075 platform.

Specification:

- Qualcomm IPQ4018 (717 MHz)
- 256 MB of RAM (DDR3)
- 16 MB (SPI NOR) + 128 MB (SPI NAND) of flash
- 2x Gbps Ethernet, with 802.3af PoE support in one port
- 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922)
- 3x U.FL connectors
- 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas
- Atmel/Microchip AT97SC3205T TPM module (I2C bus)
- TI CC2540 Bluetooth LE module (USB 2.0 bus)
- 4x LED (all driven by GPIO)
- 1x button (reset)
- 1x USB 2.0 (optional, not installed in indoor version)
- DC jack for main power input (12 V)
- UART header available on PCB (2.0 mm pitch)

Flash instruction:

1. This board uses dual-image feature (128 MB NAND is divided into two
   64 MB partitions: 'rootfs1' and 'rootfs2').
2. Before update, make sure your device is running firmware no older
   than v1.1 (previous versions have incompatible U-Boot).
3. Use 'factory' image in vendor GUI or for sysupgrade tool, without
   preserving settings.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-02-26 00:16:22 +01:00
..
qcom-ipq4018-a42.dts ipq40xx: dts: Unify naming of gpio-led nodes 2019-01-24 15:53:03 +01:00
qcom-ipq4018-ap120c-ac.dts ipq40xx: add support for ALFA Network AP120C-AC 2019-02-26 00:16:22 +01:00
qcom-ipq4018-ea6350v3.dts ipq40xx: add support for Linksys EA6350v3 2019-01-26 21:43:11 +01:00
qcom-ipq4018-eap1300.dts ipq40xx: dts: Unify naming of gpio-led nodes 2019-01-24 15:53:03 +01:00
qcom-ipq4018-ex61x0v2.dtsi ipq40xx: dts: Unify naming of gpio-led nodes 2019-01-24 15:53:03 +01:00
qcom-ipq4018-ex6100v2.dts ipq40xx: add support for Netgear EX6100v2/EX6150v2 2018-04-13 07:48:19 +02:00
qcom-ipq4018-ex6150v2.dts ipq40xx: add support for Netgear EX6100v2/EX6150v2 2018-04-13 07:48:19 +02:00
qcom-ipq4018-fritz4040.dts ipq40xx: device-tree overhaul 2018-12-17 00:21:34 +01:00
qcom-ipq4018-jalapeno.dts ipq40xx: device-tree overhaul 2018-12-17 00:21:34 +01:00
qcom-ipq4018-nbg6617.dts ipq40xx: convert to device-tree based USB LED trigger 2018-12-27 14:36:23 +01:00
qcom-ipq4018-rt-ac58u.dts ipq40xx: dts: Unify naming of gpio-led nodes 2019-01-24 15:53:03 +01:00
qcom-ipq4018-wre6606.dts ipq40xx: dts: Unify naming of gpio-led nodes 2019-01-24 15:53:03 +01:00
qcom-ipq4019-a62.dts ipq40xx: dts: Unify naming of gpio-led nodes 2019-01-24 15:53:03 +01:00
qcom-ipq4019-ap.dk04.1-c1.dts ipq40xx: add target 2018-03-14 19:04:50 +01:00
qcom-ipq4019-ap.dk04.1.dtsi ipq40xx: use patches that were sent upstream 2018-07-25 12:13:18 +02:00
qcom-ipq4019-map-ac2200.dts ipq40xx: add support for ASUS Lyra 2019-02-14 16:56:15 +01:00
qcom-ipq4028-wpj428.dts ipq40xx: dts: Unify naming of gpio-led nodes 2019-01-24 15:53:03 +01:00
qcom-ipq4029-gl-b1300.dts ipq40xx: dts: Unify naming of gpio-led nodes 2019-01-24 15:53:03 +01:00
qcom-ipq4029-mr33.dts ipq40xx: fix pcie wifi unit-address of the MR33 and A62 2018-12-20 19:21:42 +01:00