openwrt/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
Rafał Miłecki c53a0ed5e3 treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup
Now that $UPGRADE_BACKUP is set conditionally there is no need to check
the $UPGRADE_OPT_SAVE_CONFIG anymore. All conditions can be simplified.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit a858db3136)
2019-09-16 05:57:08 +02:00

108 lines
2.1 KiB
Bash

PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
RAMFS_COPY_BIN='fw_printenv fw_setenv'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
platform_check_image() {
case "$(board_name)" in
asus,rt-ac58u)
CI_UBIPART="UBI_DEV"
local ubidev=$(nand_find_ubi $CI_UBIPART)
local asus_root=$(nand_find_volume $ubidev jffs2)
[ -n "$asus_root" ] || return 0
cat << EOF
jffs2 partition is still present.
There's probably no space left
to install the filesystem.
You need to delete the jffs2 partition first:
# ubirmvol /dev/ubi0 --name=jffs2
Once this is done. Retry.
EOF
return 1
;;
esac
return 0;
}
zyxel_do_upgrade() {
local tar_file="$1"
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
if [ -n "$UPGRADE_BACKUP" ]; then
tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
else
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
fi
}
platform_do_upgrade() {
case "$(board_name)" in
8dev,jalapeno |\
alfa-network,ap120c-ac |\
avm,fritzbox-7530 |\
avm,fritzrepeater-3000 |\
qxwlan,e2600ac-c2)
nand_do_upgrade "$1"
;;
asus,map-ac2200)
CI_KERNPART="linux"
nand_do_upgrade "$1"
;;
asus,rt-ac58u)
CI_UBIPART="UBI_DEV"
CI_KERNPART="linux"
nand_do_upgrade "$1"
;;
linksys,ea6350v3 |\
linksys,ea8300)
platform_do_upgrade_linksys "$1"
;;
meraki,mr33)
CI_KERNPART="part.safe"
nand_do_upgrade "$1"
;;
openmesh,a42 |\
openmesh,a62)
PART_NAME="inactive"
platform_do_upgrade_openmesh "$1"
;;
zyxel,nbg6617)
zyxel_do_upgrade "$1"
;;
*)
default_do_upgrade "$1"
;;
esac
}
platform_nand_pre_upgrade() {
case "$(board_name)" in
alfa-network,ap120c-ac)
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
if [ "$part" = "rootfs1" ]; then
fw_setenv active 2 || exit 1
CI_UBIPART="rootfs2"
else
fw_setenv active 1 || exit 1
CI_UBIPART="rootfs1"
fi
;;
asus,rt-ac58u)
CI_UBIPART="UBI_DEV"
CI_KERNPART="linux"
;;
meraki,mr33)
CI_KERNPART="part.safe"
;;
esac
}