openwrt/target/linux/ramips/dts/DAP-1350.dts

/dts-v1/;

#include "rt3050.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "dlink,dap-1350", "ralink,rt3052-soc";
	model = "D-Link DAP-1350";

	aliases {
		led-status = &led_power_blue;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	cfi@1f000000 {
		compatible = "cfi-flash";
		reg = <0x1f000000 0x800000>;
		bank-width = <2>;
		device-width = <2>;
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		devdata: partition@30000 {
			label = "devdata";
			reg = <0x30000 0x10000>;
			read-only;
		};

		partition@40000 {
			label = "devconf";
			reg = <0x40000 0x30000>;
			read-only;
		};

		partition@70000 {
			label = "devlang";
			reg = <0x70000 0x40000>;
			read-only;
		};

		partition@b0000 {
			label = "firmware";
			reg = <0xb0000 0x750000>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		led_power_blue: power {
			label = "dap-1350:blue:power";
			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
		};

		power2 {
			label = "dap-1350:red:power";
			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
		};

		wps {
			label = "dap-1350:blue:wps";
			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		rt {
			label = "rt";
			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_0>;
		};

		ap {
			label = "ap";
			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_1>;
		};
	};
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
			ralink,function = "gpio";
		};
	};
};

&ethernet {
	mtd-mac-address = <&devdata 0x2e>;
};

&esw {
	mediatek,portmap = <0x2f>;
};

&wmac {
	ralink,mtd-eeprom = <&devdata 0>;
};

&otg {
	status = "okay";
};