mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 00:41:17 +00:00
c4c986e419
Certain AP148 platforms (and derivative) use bootloaders which did not have DT enabled. In order to support these old platforms, we'll now make the following modifications: *explicitely add the memory node in the AP148 DT: this used to be added by new u-boot through a run-time patch mechanism. We'll now add it explicitely so it works on boots which don't support that feature. New boots will have the node twice, the second one will be ignored. *add the zImage generation next to the FIT image for AP148. Other platforms using non-DT enabled bootloaders may want to leverage this zImage code to generate their own firmare as well. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 46555
261 lines
6.9 KiB
Diff
261 lines
6.9 KiB
Diff
From 5b40516b2f5fb9b2a7d6d3e2e924f12ec9d183a8 Mon Sep 17 00:00:00 2001
|
|
From: Mathieu Olivari <mathieu@codeaurora.org>
|
|
Date: Tue, 21 Apr 2015 19:01:42 -0700
|
|
Subject: [PATCH 8/9] ARM: dts: qcom: add pcie nodes to ipq806x platforms
|
|
|
|
qcom-pcie driver now supports version 0 of the controller. This change
|
|
adds the corresponding entries to the IPQ806x dtsi file and
|
|
corresponding platform (AP148).
|
|
|
|
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 30 ++++++++
|
|
arch/arm/boot/dts/qcom-ipq8064.dtsi | 124 +++++++++++++++++++++++++++++++
|
|
2 files changed, 154 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
@@ -35,6 +35,22 @@
|
|
bias-disable;
|
|
};
|
|
|
|
+ pcie1_pins: pcie1_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio3";
|
|
+ drive-strength = <2>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pcie2_pins: pcie2_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio48";
|
|
+ drive-strength = <2>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
spi_pins: spi_pins {
|
|
mux {
|
|
pins = "gpio18", "gpio19", "gpio21";
|
|
@@ -114,5 +130,19 @@
|
|
sata@29000000 {
|
|
status = "ok";
|
|
};
|
|
+
|
|
+ pcie0: pci@1b500000 {
|
|
+ status = "ok";
|
|
+ reset-gpio = <&qcom_pinmux 3 0>;
|
|
+ pinctrl-0 = <&pcie1_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ };
|
|
+
|
|
+ pcie1: pci@1b700000 {
|
|
+ status = "ok";
|
|
+ reset-gpio = <&qcom_pinmux 48 0>;
|
|
+ pinctrl-0 = <&pcie2_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
@@ -30,6 +30,30 @@
|
|
bias-disable;
|
|
};
|
|
|
|
+ pcie1_pins: pcie1_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio3";
|
|
+ drive-strength = <2>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pcie2_pins: pcie2_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio48";
|
|
+ drive-strength = <2>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pcie3_pins: pcie3_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio63";
|
|
+ drive-strength = <2>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
spi_pins: spi_pins {
|
|
mux {
|
|
pins = "gpio18", "gpio19", "gpio21";
|
|
@@ -128,5 +152,26 @@
|
|
usb30@1 {
|
|
status = "ok";
|
|
};
|
|
+
|
|
+ pcie0: pci@1b500000 {
|
|
+ status = "ok";
|
|
+ reset-gpio = <&qcom_pinmux 3 0>;
|
|
+ pinctrl-0 = <&pcie1_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ };
|
|
+
|
|
+ pcie1: pci@1b700000 {
|
|
+ status = "ok";
|
|
+ reset-gpio = <&qcom_pinmux 48 0>;
|
|
+ pinctrl-0 = <&pcie2_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ };
|
|
+
|
|
+ pcie2: pci@1b900000 {
|
|
+ status = "ok";
|
|
+ reset-gpio = <&qcom_pinmux 63 0>;
|
|
+ pinctrl-0 = <&pcie3_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
@@ -4,6 +4,8 @@
|
|
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
|
|
#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
|
|
+#include <include/dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
model = "Qualcomm IPQ8064";
|
|
@@ -329,5 +331,128 @@
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
+ pcie0: pci@1b500000 {
|
|
+ compatible = "qcom,pcie-v0";
|
|
+ reg = <0x1b500000 0x1000
|
|
+ 0x1b502000 0x80
|
|
+ 0x1b600000 0x100
|
|
+ 0x0ff00000 0x100000>;
|
|
+ reg-names = "dbi", "elbi", "parf", "config";
|
|
+ device_type = "pci";
|
|
+ linux,pci-domain = <0>;
|
|
+ bus-range = <0x00 0xff>;
|
|
+ num-lanes = <1>;
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* downstream I/O */
|
|
+ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
|
|
+
|
|
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
|
|
+ interrupt-names = "msi";
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0 0 0 0x7>;
|
|
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
+
|
|
+ clocks = <&gcc PCIE_A_CLK>,
|
|
+ <&gcc PCIE_H_CLK>,
|
|
+ <&gcc PCIE_PHY_CLK>;
|
|
+ clock-names = "core", "iface", "phy";
|
|
+
|
|
+ resets = <&gcc PCIE_ACLK_RESET>,
|
|
+ <&gcc PCIE_HCLK_RESET>,
|
|
+ <&gcc PCIE_POR_RESET>,
|
|
+ <&gcc PCIE_PCI_RESET>,
|
|
+ <&gcc PCIE_PHY_RESET>;
|
|
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ pcie1: pci@1b700000 {
|
|
+ compatible = "qcom,pcie-v0";
|
|
+ reg = <0x1b700000 0x1000
|
|
+ 0x1b702000 0x80
|
|
+ 0x1b800000 0x100
|
|
+ 0x31f00000 0x100000>;
|
|
+ reg-names = "dbi", "elbi", "parf", "config";
|
|
+ device_type = "pci";
|
|
+ linux,pci-domain = <1>;
|
|
+ bus-range = <0x00 0xff>;
|
|
+ num-lanes = <1>;
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ ranges = <0x81000000 0 0 0x31e00000 0 0x00100000 /* downstream I/O */
|
|
+ 0x82000000 0 0x00000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
|
|
+
|
|
+ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
|
|
+ interrupt-names = "msi";
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0 0 0 0x7>;
|
|
+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
+
|
|
+ clocks = <&gcc PCIE_1_A_CLK>,
|
|
+ <&gcc PCIE_1_H_CLK>,
|
|
+ <&gcc PCIE_1_PHY_CLK>;
|
|
+ clock-names = "core", "iface", "phy";
|
|
+
|
|
+ resets = <&gcc PCIE_1_ACLK_RESET>,
|
|
+ <&gcc PCIE_1_HCLK_RESET>,
|
|
+ <&gcc PCIE_1_POR_RESET>,
|
|
+ <&gcc PCIE_1_PCI_RESET>,
|
|
+ <&gcc PCIE_1_PHY_RESET>;
|
|
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ pcie2: pci@1b900000 {
|
|
+ compatible = "qcom,pcie-v0";
|
|
+ reg = <0x1b900000 0x1000
|
|
+ 0x1b902000 0x80
|
|
+ 0x1ba00000 0x100
|
|
+ 0x35f00000 0x100000>;
|
|
+ reg-names = "dbi", "elbi", "parf", "config";
|
|
+ device_type = "pci";
|
|
+ linux,pci-domain = <2>;
|
|
+ bus-range = <0x00 0xff>;
|
|
+ num-lanes = <1>;
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ ranges = <0x81000000 0 0 0x35e00000 0 0x00100000 /* downstream I/O */
|
|
+ 0x82000000 0 0x00000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
|
|
+
|
|
+ interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
|
|
+ interrupt-names = "msi";
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0 0 0 0x7>;
|
|
+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
+
|
|
+ clocks = <&gcc PCIE_2_A_CLK>,
|
|
+ <&gcc PCIE_2_H_CLK>,
|
|
+ <&gcc PCIE_2_PHY_CLK>;
|
|
+ clock-names = "core", "iface", "phy";
|
|
+
|
|
+ resets = <&gcc PCIE_2_ACLK_RESET>,
|
|
+ <&gcc PCIE_2_HCLK_RESET>,
|
|
+ <&gcc PCIE_2_POR_RESET>,
|
|
+ <&gcc PCIE_2_PCI_RESET>,
|
|
+ <&gcc PCIE_2_PHY_RESET>;
|
|
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
};
|
|
};
|