mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-03 20:44:18 +00:00
f1525e785e
Backport below changes for GigaDevice GD25Q256 support from v4.15: e27072851bf7 mtd: spi-nor: add a quad_enable callback in struct flash_info 65153846b18c mtd: spi-nor: add support for GD25Q256 This chip is used on newer Quad-E4G boards. Before: [ 2.366493] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 19 [ 2.372853] m25p80: probe of spi0.0 failed with error -2 After: [ 2.371722] m25p80 spi0.0: gd25q256 (32768 Kbytes) [ 2.376694] 5 fixed-partitions partitions found on MTD device spi0.0 [ 2.383043] Creating 5 MTD partitions on "spi0.0": [ 2.387824] 0x000000000000-0x000000030000 : "u-boot" [ 2.394138] 0x000000030000-0x000000031000 : "u-boot-env" [ 2.400608] 0x000000031000-0x000000040000 : "config" [ 2.406830] 0x000000040000-0x000000050000 : "factory" [ 2.413169] 0x000000050000-0x000002000000 : "firmware" Signed-off-by: Kuan-Yi Li <kyli@abysm.org> |
||
---|---|---|
.. | ||
101-dmaengine-img-mdc-Handle-early-status-read.patch | ||
102-spi-img-spfi-Implement-dual-and-quad-mode.patch | ||
103-spi-img-spfi-set-device-select-bits-for-SPFI-port-st.patch | ||
104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch | ||
105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch | ||
106-spi-img-spfi-finish-every-transfer-cleanly.patch | ||
107-clockevents-Retry-programming-min-delta-up-to-10-tim.patch | ||
108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch | ||
109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch | ||
401-mtd-nor-support-mtd-name-from-device-tree.patch | ||
411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch | ||
412-mtd-nand-Add-JEDEC-manufacturer-ID-for-Gigadevice.patch | ||
413-mtd-Introduce-SPI-NAND-framework.patch | ||
414-mtd-spi-nand-Support-Gigadevice-GD5F.patch | ||
901-MIPS-DTS-img-marduk-add-nor-partition-name.patch | ||
902-MIPS-DTS-img-marduk-add-nand-device-support.patch |