openwrt/target/linux/bcm27xx/patches-6.6/950-1010-nvmem-raspberrypi-Add-nvmem-driver-for-accessing-OTP.patch

From 1210adfe7b9d9f251c7c0e2c25ef96ebbf329830 Mon Sep 17 00:00:00 2001
From: Dom Cobley <popcornmix@gmail.com>
Date: Fri, 23 Feb 2024 19:25:55 +0000
Subject: [PATCH 1010/1085] nvmem: raspberrypi: Add nvmem driver for accessing
 OTP data

This supports reading and writing OTP using the firmware
mailbox interface.

It needs supporting firmware to run.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
---
 drivers/nvmem/Kconfig           |  12 +++
 drivers/nvmem/Makefile          |   2 +
 drivers/nvmem/raspberrypi-otp.c | 133 ++++++++++++++++++++++++++++++++
 3 files changed, 147 insertions(+)
 create mode 100644 drivers/nvmem/raspberrypi-otp.c

--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -52,6 +52,18 @@ config NVMEM_BLOCK
 	  typically used with eMMC to store MAC addresses or Wi-Fi
 	  calibration data on embedded devices.
 
+config NVMEM_RASPBERRYPI_OTP
+	tristate "Raspberry Pi OTP support"
+	depends on (ARCH_BCM && RASPBERRYPI_FIRMWARE) || COMPILE_TEST
+	default ARCH_BCM && RASPBERRYPI_FIRMWARE
+	help
+	  Say y here to enable support for accessing OTP on Raspberry Pi boards.
+	  These are used to store non-volatile information such as serial number,
+	  board revision and customer stored data.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called nvmem-raspberrypi-otp.
+
 config NVMEM_BCM_OCOTP
 	tristate "Broadcom On-Chip OTP Controller support"
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -12,6 +12,8 @@ obj-y				+= layouts/
 # Devices
 obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
 nvmem-apple-efuses-y 			:= apple-efuses.o
+obj-$(CONFIG_NVMEM_RASPBERRYPI_OTP)	+= nvmem-raspberrypi-otp.o
+nvmem-raspberrypi-otp-y			:= raspberrypi-otp.o
 obj-$(CONFIG_NVMEM_BCM_OCOTP)		+= nvmem-bcm-ocotp.o
 nvmem-bcm-ocotp-y			:= bcm-ocotp.o
 obj-$(CONFIG_NVMEM_BLOCK)		+= nvmem-block.o
--- /dev/null
+++ b/drivers/nvmem/raspberrypi-otp.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/**
+ * raspberrypi-otp.c
+ *
+ * nvmem driver using firmware mailbox to access otp
+ *
+ * Copyright (c) 2024, Raspberry Pi Ltd.
+ */
+
+#include <linux/nvmem-provider.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+struct rpi_otp_priv {
+	struct rpi_firmware *fw;
+	u32 block;
+};
+
+#define MAX_ROWS 192
+
+#define RPI_FIRMWARE_GET_USER_OTP 0x00030024
+#define RPI_FIRMWARE_SET_USER_OTP 0x00038024
+
+static int rpi_otp_read(void *context, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	struct rpi_otp_priv *priv = context;
+	int words = bytes / sizeof(u32);
+	int index = offset / sizeof(u32);
+	u32 data[3 + MAX_ROWS] = {priv->block, index, words};
+	int err = 0;
+
+	if (words > MAX_ROWS)
+		return -EINVAL;
+
+	err = rpi_firmware_property(priv->fw, RPI_FIRMWARE_GET_USER_OTP,
+				    &data, sizeof(data));
+	if (err == 0)
+		memcpy(val, data + 3, bytes);
+	else
+		memset(val, 0xee, bytes);
+	return err;
+}
+
+static int rpi_otp_write(void *context, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	struct rpi_otp_priv *priv = context;
+	int words = bytes / sizeof(u32);
+	int index = offset / sizeof(u32);
+	u32 data[3 + MAX_ROWS] = {priv->block, index, words};
+
+	if (bytes > MAX_ROWS * sizeof(u32))
+		return -EINVAL;
+
+	memcpy(data + 3, val, bytes);
+	return rpi_firmware_property(priv->fw, RPI_FIRMWARE_SET_USER_OTP,
+				    &data, sizeof(data));
+}
+
+static int rpi_otp_probe(struct platform_device *pdev)
+{
+	struct rpi_otp_priv *priv;
+	struct nvmem_config config = {
+		.dev = &pdev->dev,
+		.reg_read = rpi_otp_read,
+		.reg_write = rpi_otp_write,
+		.stride = sizeof(u32),
+		.word_size = sizeof(u32),
+		.type = NVMEM_TYPE_OTP,
+		.root_only = true,
+	};
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *fw_node;
+	struct rpi_firmware *fw;
+	u32 reg[2];
+	const char *pname;
+
+	if (of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg))) {
+		dev_err(dev, "Failed to parse \"reg\" property\n");
+		return -EINVAL;
+	}
+
+	pname = of_get_property(np, "name", NULL);
+	if (!pname) {
+		dev_err(dev, "Failed to parse \"name\" property\n");
+		return -ENOENT;
+	}
+
+	config.name = pname;
+	config.size = reg[1] * sizeof(u32);
+	config.read_only = !of_property_read_bool(np, "rw");
+
+	fw_node = of_parse_phandle(np, "firmware", 0);
+	if (!fw_node) {
+		dev_err(dev, "Missing firmware node\n");
+		return -ENOENT;
+	}
+
+	fw = rpi_firmware_get(fw_node);
+	if (!fw)
+		return -EPROBE_DEFER;
+
+	priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->fw = fw;
+	priv->block = reg[0];
+	config.priv = priv;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config));
+}
+
+static const struct of_device_id rpi_otp_of_match[] = {
+	{ .compatible = "raspberrypi,rpi-otp", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rpi_otp_of_match);
+
+static struct platform_driver rpi_otp_driver = {
+	.driver = {
+		.name = "rpi_otp",
+		.of_match_table = rpi_otp_of_match,
+	},
+	.probe = rpi_otp_probe,
+};
+
+module_platform_driver(rpi_otp_driver);
+
+MODULE_AUTHOR("Dom Cobley <popcornmix@gmail.com>");
+MODULE_LICENSE("GPL");