mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
bd783fd60a
Beeline SmartBox GIGA is a wireless WiFi 5 router manufactured by
Sercomm company.
Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB, Nanya NT5CC128M16JR-EK
Flash: 128 MiB, Macronix MX30LF1G18AC
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7613BE): a/n/ac, 2x2
Ethernet: 3 ports - 2xGbE (WAN, LAN1), 1xFE (LAN2)
USB ports: 1xUSB3.0
Button: 1 button (Reset/WPS)
PCB ID: DBE00B-1.6MM
LEDs: 1 RGB LED
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot
Installation
-----------------
1. Downgrade stock (Beeline) firmware to v.1.0.02;
2. Give factory OpenWrt image a shorter name, e.g. 1001.img;
3. Upload and update the firmware via the original web interface.
Remark: You might need make the 3rd step twice if your running firmware
is booted from the Slot 1 (Sercomm0 bootflag). The stock firmware
reverses the bootflag (Sercomm0 / Sercomm1) on each firmware update.
Revert to stock
---------------
1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
2. Optional: Update with any stock (Beeline) firmware if you want to
overwrite OpenWrt in Slot 0 completely.
MAC Addresses
-------------
+-----+-----------+---------+
| use | address | example |
+-----+-----------+---------+
| LAN | label | *:16 |
| WAN | label + 1 | *:17 |
| 2g | label + 4 | *:1a |
| 5g | label + 5 | *:1b |
+-----+-----------+---------+
The label MAC address was found in Factory 0x21000
Notes
-----
1. The following scripts are required for the build:
sercomm-crypto.py - already exists in OpenWrt
sercomm-partition-tag.py - already exists in OpenWrt
sercomm-payload.py - already exists in OpenWrt
sercomm-pid.py - new, the part of this pull request
sercomm-kernel-header.py - new, the part of this pull request
2. This device (same as other Sercomm S2,S3-based devices) requires
special LZMA and LOADADDR settings for successful boot:
LZMA_TEXT_START=0x82800000
KERNEL_LOADADDR=0x81001000
LOADADDR=0x80001000
3. This device (same as several other Sercomm-based devices - Beeline,
Netgear, Etisalat, Rostelecom) has partition map (mtd1) containing
real partition offsets, which may differ from device to device
depending on the number and location of bad blocks on NAND.
"fixed-partitions" is used if the partition map is not found or
corrupted. This behavour (it's the same as on stock firmware) is
provided by MTD_SERCOMM_PARTS module.
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
88 lines
2.4 KiB
Makefile
88 lines
2.4 KiB
Makefile
DEVICE_VARS += SERCOMM_KERNEL_OFFSET SERCOMM_ROOTFS_OFFSET
|
|
|
|
define Build/sercomm-crypto
|
|
$(TOPDIR)/scripts/sercomm-crypto.py \
|
|
--input-file $@ \
|
|
--key-file $@.key \
|
|
--output-file $@.ser \
|
|
--version $(SERCOMM_SWVER)
|
|
$(STAGING_DIR_HOST)/bin/openssl enc -md md5 -aes-256-cbc \
|
|
-in $@ \
|
|
-out $@.enc \
|
|
-K `cat $@.key` \
|
|
-iv 00000000000000000000000000000000
|
|
dd if=$@.enc >> $@.ser 2>/dev/null
|
|
mv $@.ser $@
|
|
rm -f $@.enc $@.key
|
|
endef
|
|
|
|
define Build/sercomm-kernel
|
|
$(TOPDIR)/scripts/sercomm-kernel-header.py \
|
|
--kernel-image $@ \
|
|
--kernel-offset $(SERCOMM_KERNEL_OFFSET) \
|
|
--rootfs-offset $(SERCOMM_ROOTFS_OFFSET) \
|
|
--output-header $@.hdr
|
|
dd if=$@ >> $@.hdr 2>/dev/null
|
|
mv $@.hdr $@
|
|
endef
|
|
|
|
define Build/sercomm-part-tag
|
|
$(call Build/sercomm-part-tag-common,$(word 1,$(1)) $@)
|
|
endef
|
|
|
|
define Build/sercomm-part-tag-common
|
|
$(eval file=$(word 2,$(1)))
|
|
$(TOPDIR)/scripts/sercomm-partition-tag.py \
|
|
--input-file $(file) \
|
|
--output-file $(file).tmp \
|
|
--part-name $(word 1,$(1)) \
|
|
--part-version $(SERCOMM_SWVER)
|
|
mv $(file).tmp $(file)
|
|
endef
|
|
|
|
define Build/sercomm-payload
|
|
$(TOPDIR)/scripts/sercomm-pid.py \
|
|
--hw-version $(SERCOMM_HWVER) \
|
|
--hw-id $(SERCOMM_HWID) \
|
|
--sw-version $(SERCOMM_SWVER) \
|
|
--pid-file $@.pid \
|
|
--extra-padding-size 0x10 \
|
|
--extra-padding-first-byte 0x0a
|
|
$(TOPDIR)/scripts/sercomm-payload.py \
|
|
--input-file $@ \
|
|
--output-file $@.tmp \
|
|
--pid "$$(cat $@.pid | od -t x1 -An -v | tr -d '\n')"
|
|
mv $@.tmp $@
|
|
rm $@.pid
|
|
endef
|
|
|
|
define Build/sercomm-prepend-tagged-kernel
|
|
$(CP) $(IMAGE_KERNEL) $(IMAGE_KERNEL).tagged
|
|
$(call Build/sercomm-part-tag-common,$(word 1,$(1)) \
|
|
$(IMAGE_KERNEL).tagged)
|
|
dd if=$@ >> $(IMAGE_KERNEL).tagged 2>/dev/null
|
|
mv $(IMAGE_KERNEL).tagged $@
|
|
endef
|
|
|
|
define Device/sercomm_dxx
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 6144k
|
|
UBINIZE_OPTS := -E 5
|
|
LOADER_TYPE := bin
|
|
KERNEL_LOADADDR := 0x81001000
|
|
LZMA_TEXT_START := 0x82800000
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma -a0 | \
|
|
uImage lzma | sercomm-kernel
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
|
|
lzma -a0 | uImage lzma
|
|
IMAGES += factory.img
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.img := append-ubi | sercomm-part-tag rootfs | \
|
|
sercomm-prepend-tagged-kernel kernel | gzip | sercomm-payload | \
|
|
sercomm-crypto
|
|
SERCOMM_KERNEL_OFFSET := 0x400100
|
|
SERCOMM_ROOTFS_OFFSET := 0x1000000
|
|
endef
|