mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
a0ad07ea03
Increase the available flash memory size in Netgear R7800
by repurposing the unused "netgear" partition that is
located after the firmware partition.
Available flash space for kernel+rootfs+overlay increases
by 68 MB from 32 MB to 100 MB.
In a typical build, overlay space increases from 15 to 85,
increasing the package installation possibilities greatly.
Reverting to the OEM firmware is still possible, as the OEM
firmware contains logic to initialise the "netgear" partition
if its contents do not match expectations. In OEM firmware,
"netgear" contains 6 UBI sub-partitions that are defined in
/etc/netgear.cfg and initialisation is done by /etc/preinit
This is based on fb8a578aa7
Signed-off-by: Mike Lothian <mike@fireburn.co.uk>
455 lines
12 KiB
Makefile
455 lines
12 KiB
Makefile
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
|
DEVICE_VARS += TPLINK_BOARD_ID
|
|
|
|
define Build/buffalo-rootfs-cksum
|
|
( \
|
|
echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
|
|
$(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
|
|
) >> $@
|
|
endef
|
|
|
|
define Build/edimax-header
|
|
$(eval edimax_model=$(word 1,$(1)))
|
|
|
|
$(STAGING_DIR_HOST)/bin/mkedimaximg \
|
|
-b -s CSYS -m $(edimax_model) \
|
|
-f 0x70000 -S 0x1200000 \
|
|
-i $@ -o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Device/DniImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
NETGEAR_BOARD_ID :=
|
|
NETGEAR_HW_ID :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | netgear-dni
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | \
|
|
append-metadata
|
|
endef
|
|
|
|
define Device/TpSafeImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
TPLINK_BOARD_ID :=
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
IMAGE/sysupgrade.bin := append-rootfs | \
|
|
tplink-safeloader sysupgrade | append-metadata
|
|
endef
|
|
|
|
define Device/ZyXELImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none | \
|
|
pad-to $$(KERNEL_SIZE)
|
|
KERNEL_NAME := zImage
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | \
|
|
pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | \
|
|
pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | \
|
|
append-metadata
|
|
endef
|
|
|
|
define Device/askey_rt4230w-rev6
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := Askey
|
|
DEVICE_MODEL := RT4230W
|
|
DEVICE_VARIANT := REV6
|
|
SOC := qcom-ipq8065
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
KERNEL_IN_UBI := 1
|
|
endef
|
|
TARGET_DEVICES += askey_rt4230w-rev6
|
|
|
|
define Device/asrock_g10
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
SOC := qcom-ipq8064
|
|
DEVICE_VENDOR := ASRock
|
|
DEVICE_MODEL := G10
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 5332k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
|
|
IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
|
|
endef
|
|
TARGET_DEVICES += asrock_g10
|
|
|
|
define Device/buffalo_wxr-2533dhp
|
|
$(call Device/LegacyImage)
|
|
SOC := qcom-ipq8064
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WXR-2533DHP
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
|
|
sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += buffalo_wxr-2533dhp
|
|
|
|
define Device/compex_wpq864
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPQ864
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SOC := qcom-ipq8064
|
|
DEVICE_PACKAGES := kmod-gpio-beeper
|
|
endef
|
|
TARGET_DEVICES += compex_wpq864
|
|
|
|
define Device/edgecore_ecw5410
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Edgecore
|
|
DEVICE_MODEL := ECW5410
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@v2.0-ap160
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct \
|
|
ipq-wifi-edgecore_ecw5410
|
|
endef
|
|
TARGET_DEVICES += edgecore_ecw5410
|
|
|
|
define Device/linksys_ea7500-v1
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA7500
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 3072k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | \
|
|
append-uImage-fakehdr filesystem
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | pad-to $$$$(PAGESIZE)
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7500-v1
|
|
|
|
define Device/linksys_ea8500
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA8500
|
|
SOC := qcom-ipq8064
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 3072k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | \
|
|
append-uImage-fakehdr filesystem
|
|
BOARD_NAME := ea8500
|
|
SUPPORTED_DEVICES += ea8500
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += linksys_ea8500
|
|
|
|
define Device/meraki_mr42
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Cisco Meraki
|
|
DEVICE_MODEL := MR42
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_LOADADDR = 0x44208000
|
|
DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
|
|
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
|
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
|
|
-uboot-envtools ath10k-firmware-qca9887-ct \
|
|
ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
|
|
kmod-leds-tlc591xx
|
|
endef
|
|
TARGET_DEVICES += meraki_mr42
|
|
|
|
define Device/meraki_mr52
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Cisco Meraki
|
|
DEVICE_MODEL := MR52
|
|
SOC := qcom-ipq8068
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_LOADADDR = 0x44208000
|
|
DEVICE_DTS_CONFIG := config@2
|
|
DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
|
|
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
|
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
|
|
-uboot-envtools ath10k-firmware-qca9887-ct \
|
|
ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
|
|
kmod-leds-tlc591xx
|
|
endef
|
|
TARGET_DEVICES += meraki_mr52
|
|
|
|
define Device/nec_wg2600hp
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := NEC
|
|
DEVICE_MODEL := Aterm WG2600HP
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := wg2600hp
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += nec_wg2600hp
|
|
|
|
define Device/nec_wg2600hp3
|
|
$(call Device/LegacyImage)
|
|
DEVICE_VENDOR := NEC Platforms
|
|
DEVICE_MODEL := Aterm WG2600HP3
|
|
SOC := qcom-ipq8062
|
|
BLOCKSIZE := 64k
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform \
|
|
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
|
|
-kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
|
|
ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
|
|
endef
|
|
TARGET_DEVICES += nec_wg2600hp3
|
|
|
|
define Device/netgear_d7800
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 D7800
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := D7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := d7800
|
|
SUPPORTED_DEVICES += d7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := Sysupgrade does not work due to rootfs ubi partition size change. \
|
|
Use factory image with the TFTP recovery flash routine.
|
|
endef
|
|
TARGET_DEVICES += netgear_d7800
|
|
|
|
define Device/netgear_r7500
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 R7500
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7500
|
|
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500
|
|
SUPPORTED_DEVICES += r7500
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500
|
|
|
|
define Device/netgear_r7500v2
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4 R7500
|
|
DEVICE_VARIANT := v2
|
|
SOC := qcom-ipq8064
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7500v2
|
|
NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500v2
|
|
SUPPORTED_DEVICES += r7500v2
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct \
|
|
ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500v2
|
|
|
|
define Device/netgear_r7800
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk X4S R7800
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := R7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7800
|
|
SUPPORTED_DEVICES += r7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_r7800
|
|
|
|
define Device/netgear_xr500
|
|
$(call Device/DniImage)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := Nighthawk XR500
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
NETGEAR_BOARD_ID := XR500
|
|
NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_xr500
|
|
|
|
define Device/qcom_ipq8064-ap148
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP148
|
|
DEVICE_VARIANT := standard
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES += ap148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148
|
|
|
|
define Device/qcom_ipq8064-ap148-legacy
|
|
$(call Device/LegacyImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP148
|
|
DEVICE_VARIANT := legacy
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148-legacy
|
|
|
|
define Device/qcom_ipq8064-ap161
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := AP161
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-ap161
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap161
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap161
|
|
|
|
define Device/qcom_ipq8064-db149
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Qualcomm
|
|
DEVICE_MODEL := DB149
|
|
SOC := qcom-ipq8064
|
|
DEVICE_DTS := qcom-ipq8064-db149
|
|
KERNEL_INSTALL := 1
|
|
BOARD_NAME := db149
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-db149
|
|
|
|
define Device/tplink_ad7200
|
|
$(call Device/TpSafeImage)
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := AD7200
|
|
DEVICE_VARIANT := v1/v2
|
|
DEVICE_ALT0_VENDOR := TP-Link
|
|
DEVICE_ALT0_MODEL := Talon AD7200
|
|
DEVICE_ALT0_VARIANT := v1/v2
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
TPLINK_BOARD_ID := AD7200
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
|
|
endef
|
|
TARGET_DEVICES += tplink_ad7200
|
|
|
|
define Device/tplink_c2600
|
|
$(call Device/TpSafeImage)
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer C2600
|
|
DEVICE_VARIANT := v1
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := c2600
|
|
SUPPORTED_DEVICES += c2600
|
|
TPLINK_BOARD_ID := C2600
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
endef
|
|
TARGET_DEVICES += tplink_c2600
|
|
|
|
define Device/tplink_vr2600v
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer VR2600v
|
|
DEVICE_VARIANT := v1
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
IMAGE_SIZE := 12672k
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := vr2600v
|
|
SUPPORTED_DEVICES += vr2600v
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
|
|
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | \
|
|
append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += tplink_vr2600v
|
|
|
|
define Device/ubnt_unifi-ac-hd
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := UniFi AC HD
|
|
SOC := qcom-ipq8064
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := 14784k
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | append-metadata
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-ac-hd
|
|
|
|
define Device/zyxel_nbg6817
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NBG6817
|
|
SOC := qcom-ipq8065
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := nbg6817
|
|
RAS_BOARD := NBG6817
|
|
RAS_ROOTFS_SIZE := 20934k
|
|
RAS_VERSION := "V1.99(OWRT.9999)C0"
|
|
SUPPORTED_DEVICES += nbg6817
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs \
|
|
kmod-fs-ext4 losetup
|
|
$(call Device/ZyXELImage)
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6817
|