mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 17:01:14 +00:00
60384d8a74
MT7915 requires an additional antenna for background radar scanning. Disable this feature in the following devices that do not have a separate DFS antenna: linksys,e8450 ruijie,rg-ew3200gx-pro xiaomi,redmi-router-ax6s Signed-off-by: Shiji Yang <yangshiji66@qq.com>
330 lines
5.1 KiB
Plaintext
330 lines
5.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#include "mt7622.dtsi"
|
|
#include "mt6380.dtsi"
|
|
|
|
/ {
|
|
model = "Ruijie RG-EW3200GX PRO";
|
|
compatible = "ruijie,rg-ew3200gx-pro", "mediatek,mt7622";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
label-mac-device = &gmac0;
|
|
led-boot = &led_system;
|
|
led-failsafe = &led_system;
|
|
led-running = &led_system;
|
|
led-upgrade = &led_system;
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n1";
|
|
bootargs = "console=ttyS0,115200n1 swiotlb=512";
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
proc-supply = <&mt6380_vcpu_reg>;
|
|
sram-supply = <&mt6380_vm_reg>;
|
|
};
|
|
|
|
cpu@1 {
|
|
proc-supply = <&mt6380_vcpu_reg>;
|
|
sram-supply = <&mt6380_vm_reg>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&pio 102 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
mesh_green {
|
|
label = "green:mesh";
|
|
gpios = <&pio 79 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
mesh_red {
|
|
label = "red:mesh";
|
|
gpios = <&pio 82 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_system: system_blue {
|
|
label = "blue:system";
|
|
gpios = <&pio 81 GPIO_ACTIVE_LOW>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x40000000>;
|
|
};
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð_pins>;
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-connection-type = "2500base-x";
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch@0 {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <0>;
|
|
reset-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan4";
|
|
};
|
|
|
|
wan: port@4 {
|
|
reg = <4>;
|
|
label = "wan";
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie0_pins>;
|
|
};
|
|
|
|
&slot0 {
|
|
wifi@0,0 {
|
|
compatible = "mediatek,mt76";
|
|
reg = <0x0000 0 0 0 0>;
|
|
mediatek,mtd-eeprom = <&factory 0x5000>;
|
|
ieee80211-freq-limit = <5000000 6000000>;
|
|
mediatek,disable-radar-background;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
epa_elna_pins: epa-elna-pins {
|
|
mux {
|
|
function = "antsel";
|
|
groups = "antsel0", "antsel1", "antsel2", "antsel3",
|
|
"antsel4", "antsel5", "antsel6", "antsel7",
|
|
"antsel8", "antsel9", "antsel12", "antsel13",
|
|
"antsel14", "antsel15", "antsel16", "antsel17";
|
|
};
|
|
};
|
|
|
|
eth_pins: eth-pins {
|
|
mux {
|
|
function = "eth";
|
|
groups = "mdc_mdio", "rgmii_via_gmac2";
|
|
};
|
|
};
|
|
|
|
pcie0_pins: pcie0-pins {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie0_pad_perst",
|
|
"pcie0_0_waken",
|
|
"pcie0_0_clkreq";
|
|
};
|
|
};
|
|
|
|
pmic_bus_pins: pmic-bus-pins {
|
|
mux {
|
|
function = "pmic";
|
|
groups = "pmic_bus";
|
|
};
|
|
};
|
|
|
|
spi_nor_pins: spi-nor-pins {
|
|
mux {
|
|
function = "flash";
|
|
groups = "spi_nor";
|
|
};
|
|
};
|
|
|
|
uart0_pins: uart0-pins {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart0_0_tx_rx";
|
|
};
|
|
};
|
|
|
|
watchdog_pins: watchdog-pins {
|
|
mux {
|
|
function = "watchdog";
|
|
groups = "watchdog";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwrap {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_bus_pins>;
|
|
};
|
|
|
|
&nor_flash {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_nor_pins>;
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "Preloader";
|
|
reg = <0x0 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "ATF";
|
|
reg = <0x40000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@60000 {
|
|
label = "u-boot";
|
|
reg = <0x60000 0x50000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@B0000 {
|
|
label = "u-boot-env";
|
|
reg = <0xb0000 0x20000>;
|
|
};
|
|
|
|
factory: partition@D0000 {
|
|
label = "Factory";
|
|
reg = <0xd0000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@150000 {
|
|
label = "product_info";
|
|
reg = <0x150000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@160000 {
|
|
label = "kdump";
|
|
reg = <0x160000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@170000 {
|
|
compatible = "denx,fit";
|
|
label = "firmware";
|
|
reg = <0x170000 0xe90000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&watchdog_pins>;
|
|
};
|
|
|
|
&wmac {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&epa_elna_pins>;
|
|
mediatek,mtd-eeprom = <&factory 0x0>;
|
|
};
|