openwrt/target/linux/ramips
DENG Qingfang f9cfe7af1f kernel: backport MT7530 IRQ support
Support MT7530 PHY link change interrupts, and enable for MT7621.

For external MT7530, a GPIO IRQ line is required, which is
board-specific, so it should be added to each DTS. In case the
interrupt-controller property is missing, it will fall back to
polling mode.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
2022-02-10 13:44:06 +00:00
..
base-files/etc ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
dts kernel: backport MT7530 IRQ support 2022-02-10 13:44:06 +00:00
files/drivers ramips: aw9523: add can_sleep flag for GPIO chip 2021-12-29 03:43:03 +01:00
image ramips: move KERNEL_LOADADDR into Device/Default 2022-02-08 23:23:53 +09:00
mt76x8 ramips: correct vendor name for COMFAST/Joowin 2022-01-22 01:17:04 +01:00
mt7620 ramips: add support for Wavlink WL-WN535K1 2022-01-30 01:15:23 +09:00
mt7621 kernel: backport MediaTek Ethernet PHY driver 2022-02-09 21:17:54 +00:00
patches-5.10 kernel: 5.10: drop broken-flash-reset patch 2022-01-28 21:03:10 +08:00
rt288x kernel: filter out both Clang and LLD versions 2021-12-17 16:16:34 +01:00
rt305x ramips: Switch Teltonika RUT5xx to kernel GPIO-line watchdog driver 2022-02-03 22:27:15 +01:00
rt3883 kernel: filter out both Clang and LLD versions 2021-12-17 16:16:34 +01:00
Makefile ramips: switch to kernel 5.10 2021-12-13 19:36:52 +01:00
modules.mk ramips: rename mtk-hsdma to hsdma-mt7621 2021-03-04 23:43:02 -10:00