mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
ca5c695a45
Deleted following upstreamed patches: bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch Manually rebased following patches: bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch Runtime tested on turris-omnia and glinet-b1300. Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200] Signed-off-by: Petr Štetiar <ynezz@true.cz>
387 lines
7.6 KiB
Diff
387 lines
7.6 KiB
Diff
From 702a8f4744ed5b480f2b2411858184afdb10f9fd Mon Sep 17 00:00:00 2001
|
|
From: Matthew Hagan <mnhagan88@gmail.com>
|
|
Date: Fri, 6 Aug 2021 21:44:35 +0100
|
|
Subject: [PATCH] ARM: dts: NSP: Add DT files for Meraki MX65 series
|
|
|
|
MX65 & MX65W Hardware info:
|
|
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
|
|
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
|
|
- Storage: 1 GB (Micron MT29F8G08ABACA)
|
|
- Networking: BCM58625 switch (2x 1GbE ports)
|
|
2x Qualcomm QCA8337 switches (10x 1GbE ports total)
|
|
- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
|
|
- USB: 1x USB2.0
|
|
- Serial: Internal header
|
|
- WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
|
|
|
|
Note that a driver and firmware image for the BCM59111 PSE has been
|
|
released under GPL, but this is not present in the kernel.
|
|
|
|
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
|
|
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 2 +
|
|
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
|
|
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
|
|
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
|
|
4 files changed, 337 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
|
|
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
|
|
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -162,6 +162,8 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
|
|
bcm958625-meraki-mx64-a0.dtb \
|
|
bcm958625-meraki-mx64w.dtb \
|
|
bcm958625-meraki-mx64w-a0.dtb \
|
|
+ bcm958625-meraki-mx65.dtb \
|
|
+ bcm958625-meraki-mx65w.dtb \
|
|
bcm958625hr.dtb \
|
|
bcm988312hr.dtb \
|
|
bcm958625k.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
|
|
@@ -0,0 +1,279 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+/*
|
|
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
|
|
+ *
|
|
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
|
|
+ */
|
|
+
|
|
+#include "bcm958625-meraki-mx6x-common.dtsi"
|
|
+
|
|
+/ {
|
|
+ keys {
|
|
+ compatible = "gpio-keys-polled";
|
|
+ autorepeat;
|
|
+ poll-interval = <20>;
|
|
+
|
|
+ reset {
|
|
+ label = "reset";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ led-0 {
|
|
+ /* green:wan1-left */
|
|
+ function = LED_FUNCTION_ACTIVITY;
|
|
+ function-enumerator = <0>;
|
|
+ color = <LED_COLOR_ID_GREEN>;
|
|
+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ led-1 {
|
|
+ /* green:wan1-right */
|
|
+ function = LED_FUNCTION_ACTIVITY;
|
|
+ function-enumerator = <1>;
|
|
+ color = <LED_COLOR_ID_GREEN>;
|
|
+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ led-2 {
|
|
+ /* green:wan2-left */
|
|
+ function = LED_FUNCTION_ACTIVITY;
|
|
+ function-enumerator = <2>;
|
|
+ color = <LED_COLOR_ID_GREEN>;
|
|
+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ led-3 {
|
|
+ /* green:wan2-right */
|
|
+ function = LED_FUNCTION_ACTIVITY;
|
|
+ function-enumerator = <3>;
|
|
+ color = <LED_COLOR_ID_GREEN>;
|
|
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ led-4 {
|
|
+ /* amber:power */
|
|
+ function = LED_FUNCTION_POWER;
|
|
+ color = <LED_COLOR_ID_AMBER>;
|
|
+ gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
|
|
+ default-state = "on";
|
|
+ };
|
|
+
|
|
+ led-5 {
|
|
+ /* white:status */
|
|
+ function = LED_FUNCTION_STATUS;
|
|
+ color = <LED_COLOR_ID_WHITE>;
|
|
+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ mdio-mii-mux {
|
|
+ compatible = "mdio-mux-mmioreg";
|
|
+ reg = <0x1803f1c0 0x4>;
|
|
+ mux-mask = <0x2000>;
|
|
+ mdio-parent-bus = <&mdio_ext>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mdio@0 {
|
|
+ reg = <0x0>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ phy_port6: phy@0 {
|
|
+ reg = <0>;
|
|
+ };
|
|
+
|
|
+ phy_port7: phy@1 {
|
|
+ reg = <1>;
|
|
+ };
|
|
+
|
|
+ phy_port8: phy@2 {
|
|
+ reg = <2>;
|
|
+ };
|
|
+
|
|
+ phy_port9: phy@3 {
|
|
+ reg = <3>;
|
|
+ };
|
|
+
|
|
+ phy_port10: phy@4 {
|
|
+ reg = <4>;
|
|
+ };
|
|
+
|
|
+ switch@10 {
|
|
+ compatible = "qca,qca8337";
|
|
+ reg = <0x10>;
|
|
+ dsa,member = <1 0>;
|
|
+
|
|
+ ports {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ ethernet = <&sgmii1>;
|
|
+ phy-mode = "sgmii";
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ reg = <1>;
|
|
+ label = "lan8";
|
|
+ phy-handle = <&phy_port6>;
|
|
+ };
|
|
+
|
|
+ port@2 {
|
|
+ reg = <2>;
|
|
+ label = "lan9";
|
|
+ phy-handle = <&phy_port7>;
|
|
+ };
|
|
+
|
|
+ port@3 {
|
|
+ reg = <3>;
|
|
+ label = "lan10";
|
|
+ phy-handle = <&phy_port8>;
|
|
+ };
|
|
+
|
|
+ port@4 {
|
|
+ reg = <4>;
|
|
+ label = "lan11";
|
|
+ phy-handle = <&phy_port9>;
|
|
+ };
|
|
+
|
|
+ port@5 {
|
|
+ reg = <5>;
|
|
+ label = "lan12";
|
|
+ phy-handle = <&phy_port10>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ mdio-mii@2000 {
|
|
+ reg = <0x2000>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ phy_port1: phy@0 {
|
|
+ reg = <0>;
|
|
+ };
|
|
+
|
|
+ phy_port2: phy@1 {
|
|
+ reg = <1>;
|
|
+ };
|
|
+
|
|
+ phy_port3: phy@2 {
|
|
+ reg = <2>;
|
|
+ };
|
|
+
|
|
+ phy_port4: phy@3 {
|
|
+ reg = <3>;
|
|
+ };
|
|
+
|
|
+ phy_port5: phy@4 {
|
|
+ reg = <4>;
|
|
+ };
|
|
+
|
|
+ switch@10 {
|
|
+ compatible = "qca,qca8337";
|
|
+ reg = <0x10>;
|
|
+ dsa,member = <2 0>;
|
|
+
|
|
+ ports {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ ethernet = <&sgmii0>;
|
|
+ phy-mode = "sgmii";
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ reg = <1>;
|
|
+ label = "lan3";
|
|
+ phy-handle = <&phy_port1>;
|
|
+ };
|
|
+
|
|
+ port@2 {
|
|
+ reg = <2>;
|
|
+ label = "lan4";
|
|
+ phy-handle = <&phy_port2>;
|
|
+ };
|
|
+
|
|
+ port@3 {
|
|
+ reg = <3>;
|
|
+ label = "lan5";
|
|
+ phy-handle = <&phy_port3>;
|
|
+ };
|
|
+
|
|
+ port@4 {
|
|
+ reg = <4>;
|
|
+ label = "lan6";
|
|
+ phy-handle = <&phy_port4>;
|
|
+ };
|
|
+
|
|
+ port@5 {
|
|
+ reg = <5>;
|
|
+ label = "lan7";
|
|
+ phy-handle = <&phy_port5>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&srab {
|
|
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
|
|
+ status = "okay";
|
|
+ dsa,member = <0 0>;
|
|
+
|
|
+ ports {
|
|
+ port@0 {
|
|
+ label = "wan1";
|
|
+ reg = <0>;
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ label = "wan2";
|
|
+ reg = <1>;
|
|
+ };
|
|
+
|
|
+ sgmii0: port@4 {
|
|
+ label = "sw0";
|
|
+ reg = <4>;
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ sgmii1: port@5 {
|
|
+ label = "sw1";
|
|
+ reg = <5>;
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ port@8 {
|
|
+ ethernet = <&amac2>;
|
|
+ reg = <8>;
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
|
|
@@ -0,0 +1,24 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+/*
|
|
+ * Device Tree Bindings for Cisco Meraki MX65.
|
|
+ *
|
|
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm958625-meraki-alamo.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Cisco Meraki MX65";
|
|
+ compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ memory@60000000 {
|
|
+ device_type = "memory";
|
|
+ reg = <0x60000000 0x80000000>;
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
|
|
@@ -0,0 +1,32 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+/*
|
|
+ * Device Tree Bindings for Cisco Meraki MX65W.
|
|
+ *
|
|
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm958625-meraki-alamo.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Cisco Meraki MX65W";
|
|
+ compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ memory@60000000 {
|
|
+ device_type = "memory";
|
|
+ reg = <0x60000000 0x80000000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&pcie0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pcie1 {
|
|
+ status = "okay";
|
|
+};
|