openwrt/target/linux/ramips/dts/mt7621_bolt_arion.dts
Christian Marangi 19c45b95db
ramips: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:43 +01:00

200 lines
3.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "bolt,arion", "mediatek,mt7621-soc";
model = "Bolt Arion";
aliases {
label-mac-device = &wan;
};
chosen {
bootargs = "console=ttyS0,57600n8";
};
leds {
compatible = "gpio-leds";
led_wlan_blue: wlan_blue {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
};
led_wlan_red: wlan_red {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 86 GPIO_ACTIVE_LOW>;
};
led_tel_blue: tel_blue {
label = "blue:tel";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
};
led_sig1_blue: sig1_blue {
label = "blue:sig1";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
led_sig1_red: sig1_red {
label = "red:sig1";
gpios = <&gpio 87 GPIO_ACTIVE_LOW>;
};
led_sig2_blue: sig2_blue {
label = "blue:sig2";
gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
};
led_sig3_blue: sig3_blue {
label = "blue:sig3";
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "WPS";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x20000 0x20000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
macaddr_factory_28: macaddr@28 {
compatible = "mac-base";
reg = <0x28 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "pci14c3,7603";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_28 3>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "modem";
};
wan: port@1 {
status = "okay";
label = "wan";
nvmem-cells = <&macaddr_factory_28 0>;
nvmem-cell-names = "mac-address";
};
port@2 {
status = "okay";
label = "lan";
};
};
};
&ethernet {
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};
&state_default {
gpio {
groups = "jtag", "uart2", "uart3", "wdt", "rgmii2";
function = "gpio";
};
};