mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
ad6b077049
The mt76x8 subtarget is the only one in ramips that stores the mediatek,mtd-eeprom property directly in the "root" mt7628an.dtsi. This is not optimal for a few different reasons: * If you don't really know it or are used to other (sub)targets, the property will be set somewhat magically. * The property is set based on &factory partition before (if at all) this partition is defined. * There are several devices that have different offset or even different partitions to read from, which will then be overwritten in the DTS files. Thus, definitions are scattered between root DTSI and individual files. Based on these circumstances, the "root" definition is removed and the property is added to the device-based DTS(I) files where needed and applicable. This should be easier to grasp for unexperienced developers and will move the property closer to the partition definitions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
142 lines
2.2 KiB
Plaintext
142 lines
2.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7628an.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
compatible = "tplink,tl-wr841n-v14", "mediatek,mt7628an-soc";
|
|
model = "TP-Link TL-WR841N v14";
|
|
|
|
aliases {
|
|
led-boot = &led_wlan;
|
|
led-failsafe = &led_wlan;
|
|
led-upgrade = &led_wlan;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
lan {
|
|
label = "green:lan";
|
|
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wan_green {
|
|
label = "green:wan";
|
|
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_wlan: wlan {
|
|
label = "green:wlan";
|
|
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy0tpt";
|
|
};
|
|
|
|
wan_orange {
|
|
label = "orange:wan";
|
|
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "boot";
|
|
reg = <0x0 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@10000 {
|
|
compatible = "tplink,firmware";
|
|
label = "firmware";
|
|
reg = <0x10000 0x3e0000>;
|
|
};
|
|
|
|
factory: partition@3f0000 {
|
|
label = "factory";
|
|
reg = <0x3f0000 0x10000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ehci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&ohci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&wmac {
|
|
status = "okay";
|
|
|
|
mediatek,mtd-eeprom = <&factory 0x0>;
|
|
|
|
nvmem-cells = <&macaddr_factory_f100>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
ðernet {
|
|
nvmem-cells = <&macaddr_factory_f100>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&esw {
|
|
mediatek,portmap = <0x3e>;
|
|
};
|
|
|
|
&state_default {
|
|
gpio {
|
|
groups = "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "wdt";
|
|
function = "gpio";
|
|
};
|
|
};
|
|
|
|
&gpio {
|
|
led_wlan_enable {
|
|
gpio-hog;
|
|
gpios = <43 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
&factory {
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_factory_f100: macaddr@f100 {
|
|
reg = <0xf100 0x6>;
|
|
};
|
|
};
|