openwrt/target/linux/ramips
David Bentham 443e3bd1c6 ramips: unielec-u7621-01: Increase SPI frequency to 50MHz
Flash: 16MB SPI NOR flash (Macronix MX25L12805D)

Based on the manufactured datasheet this chip is capable of 50MHz.

We dont enable fast-read as mt7621 are only capable of 44mhz in a read state.

Tested on this unit without any issues.

Signed-off-by: David Bentham <db260179@gmail.com>
2024-01-03 00:21:09 +01:00
..
base-files/etc ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
dts ramips: unielec-u7621-01: Increase SPI frequency to 50MHz 2024-01-03 00:21:09 +01:00
files/drivers raimps: mtk_eth_soc: drop rst_esw from ESW driver 2024-01-02 22:00:20 +01:00
image ramips: lzma-loader: use default uart for rt305x 2024-01-02 22:10:34 +01:00
mt76x8 ramips: add TP-LINK TL-WR902AC v4 2023-12-06 22:59:22 +01:00
mt7620 ramips: add support for Sercomm CPJ routers 2023-11-25 01:11:18 +01:00
mt7621 ramips: add support for Rostelecom RT-FE-1A 2023-12-06 00:12:56 +01:00
patches-5.15 ramips: refresh patches 2023-12-08 23:34:42 +00:00
rt288x ramips: add proper system clock and reset driver support for legacy SoCs 2023-07-30 13:09:23 +02:00
rt305x ramips: add proper system clock and reset driver support for legacy SoCs 2023-07-30 13:09:23 +02:00
rt3883 ramips: add proper system clock and reset driver support for legacy SoCs 2023-07-30 13:09:23 +02:00
Makefile ramips: Switch default kernel to 5.15 2023-02-17 16:31:53 +02:00
modules.mk kernel: modules: break-out WM8960 codec module 2023-12-11 18:01:43 +00:00