mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
b368373fab
CPU: FSL P1020 (2x 800MHz E500 PPC) RAM: 1GB DDR3 FLASH: 256MiB NAND WiFi: 2x Atheros AR9382 2x2:2 abgn ETH: 2x BCM54616S - 1x BCM53128 8-port switch LED: 5x LEDs (Power, WiFi1, WiFi2, N/D, SYS) BTN: 1x RESET Installation ------------ 1. Download initrams kernel image, dtb binary and sysupgrade image. 2. Place initramfs kernel into tftp root directory. Rename to "panda-uimage-factory". 3. Place dtb binary into tftp root directory. Rename to "panda.fdt". 4. Start tftp server on 192.168.100.8/24. 5. Power up the device with the reset button pressed. It will download the initrams and dtb via tftp and boot into OpenWRT in RAM. 6. SSH into the device and remove the factory partitions. > ubirmvol /dev/ubi0 --name=kernel1 > ubirmvol /dev/ubi0 --name=rootfs1 > ubirmvol /dev/ubi0 --name=devicetree1 You will have around 60 MiB of free space with that. You can also delete "kernel2", "devicetree2", "rootfs2" and "storage" respectively in case you do not want to go back to the vendor firmware. 7. Modify the U-Boot bootcmd to allow for booting OpenWRT > fw_setenv bootcmd_owrt "ubi part ubi && ubi read 0x1000000 kernel && bootm 0x1000000" > fw_setenv bootargs_owrt "setenv bootargs console=ttyS0,115200 ubi.mtd=3,2048" > fw_setenv bootcmd "run bootargs_owrt; run bootcmd_owrt" 8. Transfer the sysupgrade image via scp into the /tmp directory. 9. Upgrade the device > sysupgrade -n /tmp/<imagename> Signed-off-by: David Bauer <mail@david-bauer.net>
55 lines
1.4 KiB
Plaintext
55 lines
1.4 KiB
Plaintext
CONFIG_ARCH_HAS_TICK_BROADCAST=y
|
|
CONFIG_AT803X_PHY=y
|
|
CONFIG_BROADCOM_PHY=y
|
|
CONFIG_CMDLINE_OVERRIDE=y
|
|
CONFIG_CPU_RMAP=y
|
|
CONFIG_EEPROM_LEGACY=y
|
|
# CONFIG_FSL_CORENET_CF is not set
|
|
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
|
CONFIG_GENERIC_TBSYNC=y
|
|
# CONFIG_GPIO_MAX77620 is not set
|
|
CONFIG_HAVE_RCU_TABLE_FREE=y
|
|
CONFIG_HIVEAP_330=y
|
|
CONFIG_PANDA=y
|
|
CONFIG_I2C_CHARDEV=y
|
|
CONFIG_LEDS_LP5521=y
|
|
CONFIG_LEDS_LP55XX_COMMON=y
|
|
CONFIG_LOCK_SPIN_ON_OWNER=y
|
|
# CONFIG_MAX77620_WATCHDOG is not set
|
|
CONFIG_MFD_CORE=y
|
|
CONFIG_MFD_MAX77620=y
|
|
CONFIG_MTD_CFI=y
|
|
CONFIG_MTD_NAND=y
|
|
CONFIG_MTD_NAND_ECC=y
|
|
CONFIG_MTD_NAND_FSL_ELBC=y
|
|
CONFIG_MTD_PHYSMAP=y
|
|
CONFIG_MTD_UBI=y
|
|
CONFIG_MTD_UBI_BEB_LIMIT=20
|
|
CONFIG_MTD_UBI_BLOCK=y
|
|
# CONFIG_MTD_UBI_FASTMAP is not set
|
|
# CONFIG_MTD_UBI_GLUEBI is not set
|
|
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
|
CONFIG_NET_FLOW_LIMIT=y
|
|
CONFIG_NR_CPUS=2
|
|
CONFIG_PADATA=y
|
|
CONFIG_RCU_STALL_COMMON=y
|
|
CONFIG_REGMAP_IRQ=y
|
|
CONFIG_RFS_ACCEL=y
|
|
CONFIG_RPS=y
|
|
# CONFIG_RTC_DRV_MAX77686 is not set
|
|
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
|
CONFIG_SMP=y
|
|
CONFIG_SWCONFIG_B53=y
|
|
# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
|
|
CONFIG_SWCONFIG_B53_PHY_DRIVER=y
|
|
# CONFIG_SWCONFIG_B53_PHY_FIXUP is not set
|
|
# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
|
|
# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
|
|
CONFIG_TREE_RCU=y
|
|
CONFIG_UBIFS_FS=y
|
|
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
|
CONFIG_UBIFS_FS_LZO=y
|
|
CONFIG_UBIFS_FS_ZLIB=y
|
|
CONFIG_XPS=y
|