Daniel Fuchs 794d1645b3 ramips: add support for Amped Wireless B1200EX ... This device is almost identical to the already supported Edimax EW-7476RP5, the only differences are: - There is no mode selection slider switch on this device - The two wireless LEDs are green instead of blue - Model name in the CSYS header is RN10 Additional changes: - Moved WiFi LEDs and the slider switch to the individual dt files - Added ieee80211-freq-limit to the mt7612e radio to properly disable 2.4GHz band on this radio Device specifications: SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac GbE: 1x (RTL8211E) BTN: WPS/RESET LED: - WiFi 5G (green) - WiFi 2.4G (green) - Signal Strength (green) - Power (green) - WPS (green) - LAN (green) UART: UART is present as Pads with throughholes on the PCB. They are located next to the WPS button 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation: Upload the sysupgrade image via the default web interface Signed-off-by: Daniel Fuchs <software@sagacioussuricata.com>		2022-11-13 22:36:06 +01:00
..
base-files	ramips: add support for Amped Wireless B1200EX	2022-11-13 22:36:06 +01:00
config-5.10	kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic config	2022-10-21 13:47:01 +02:00
config-5.15	kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic config	2022-10-21 13:47:01 +02:00
target.mk	treewide: use wpad-basic-wolfssl as default	2020-08-20 14:19:39 +02:00