David Bauer c48b571ad7 ramips: add LED trigger for TL-WR902AC v3 WAN LED ... This adds an LED trigger for the WAN LED on top of the TP-Link TL-WR902AC v3. Currently, only the LED on the port itself shows the link state, while the LED on top of the device stays dark. The WAN port of the device is a hybrid LAN/WAN one, hence why the LED at the port was labled LAN. Signed-off-by: David Bauer <mail@david-bauer.net>		2019-12-30 15:09:30 +01:00
..
base-files	ramips: allow to set switchdev by board in ramips_set_preinit_iface	2019-12-17 15:09:48 +01:00
dts	ramips: remove bogus ralink,mtd-eeprom with offset 0x4	2019-12-27 18:00:06 +01:00
files-4.14/drivers	ramips: ethernet: Replace random_ether_addr with eth_hw_addr_random	2019-10-27 14:13:47 +01:00
image	ramips: rename MTK_SOC to SOC	2019-12-20 01:15:57 +01:00
mt76x8	ramips: add LED trigger for TL-WR902AC v3 WAN LED	2019-12-30 15:09:30 +01:00
mt7620	ramips: add support for ipTIME A104ns	2019-12-17 13:36:11 +01:00
mt7621	ramips: add label MAC address for Mikrotik RB750Gr3	2019-12-23 02:24:55 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.158	2019-12-10 09:50:42 +01:00
rt288x	ramips: rt288x: use flash location for wan_mac in 02_network	2019-12-12 13:11:49 +01:00
rt305x	ramips: rt305x: use flash location for wan_mac in 02_network	2019-12-12 13:11:58 +01:00
rt3883	ramips: fix USB LED for Belkin F9K1109v1	2019-12-20 15:54:33 +01:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	kernel: Fix kmod-regmap split	2019-01-27 11:07:14 +01:00