openwrt/package/boot/uboot-envtools/files
Vladimir Vid c0af4a0ca2 mvebu: add initial support for Globalscale ESPRESSObin-Ultra
This patch adds support for Globalscale ESPRESSObin-Ultra. Device uses
the same Armada-3720 SoC with extended hardware support.

- SoC: Armada-3720
- RAM: 1 GB DDR4
- Flash: 4MB SPI NOR (mx25u3235f) + 8 GB eMMC
- Ethernet: Topaz 6341 88e6341 (4x GB LAN + 1x WAN with 30W PoE)
- WiFI: 2x2 802.11ac Wi-Fi marvell (88w8997 PCIe+USB)
- 1x USB 2.0 port
- 1x USB 3.0 port
- 1x microSD slot
- 1x mini-PCIe slot (USB [with nano-sim slot])
- 1x mini-USB debug UART
- 1x RTC Clock and battery
- 1x reset button
- 1x power button
- 4x LED (RGBY)
- Optional 1x M.2 2280 slot

** Installation **

Copy dtb from build_dir to bin/ and run tftpserver there:
$ cp ./build_dir/target-aarch64_cortex-a53_musl/linux-mvebu_cortexa53/
linux-5.4.65/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dtb
bin/targets/mvebu/cortexa53/
$ in.tftpd -L -s bin/targets/mvebu/cortexa53/

Connect to the device UART via microUSB port on the back side and power on the device.

Power on the device and hit any key to stop the autoboot.

Set serverip (host IP) and ipaddr (any free IP address on the same subnet), e.g:
$ setenv serverip 192.168.1.10 # Host
$ setenv ipaddr 192.168.1.15 # Device

Ping server to confirm network is working:
$ ping $serverip
Using neta@30000 device
host 192.168.1.15 is alive

Tftpboot the firmware:
$ tftpboot $kernel_addr_r openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-initramfs-kernel.bin
$ tftpboot $fdt_addr_r armada-3720-espressobin-ultra.dtb

Set the console and boot the image:
$ setenv bootargs $console
$ booti $kernel_addr_r - $fdt_addr_r

Once the initramfs is booted, transfer openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz
to /tmp dir on the device.

Gunzip and dd the image:
$ gunzip /tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz
$ dd if=/tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img of=/dev/mmcblk0 && sync

Reboot the device.

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
2020-11-23 22:53:15 +01:00
..
apm821xx apm821xx: add support for the Netgear WNDAP620 and WNDAP660 2018-11-26 12:05:46 +01:00
ath79 uboot-envtools: ath79: add support for ALFA Network Pi-WiFi4 2020-11-18 23:49:34 +01:00
cns3xxx treewide: use the generic board_name function 2017-07-15 23:13:34 +02:00
imx6 imx6: use device-tree compatible for board name 2020-07-27 12:10:45 +02:00
ipq40xx ipq40xx: Add support for Linksys MR8300 (Dallas) 2020-09-25 19:31:51 +02:00
ipq806x ipq806x: add Edgecore ECW5410 support 2020-09-17 08:42:17 +02:00
kirkwood kirkwood: use real model names for Linksys devices 2020-07-31 15:03:43 +02:00
lantiq lantiq: use uniform "u-boot-env" mtd label 2020-09-17 21:09:51 +02:00
layerscape uboot-envtools: add configuration for Traverse LS1043 boards. 2018-07-30 10:53:57 +02:00
mpc85xx mpc85xx: add support for OCEDO Panda 2019-01-26 17:10:19 +01:00
mvebu mvebu: add initial support for Globalscale ESPRESSObin-Ultra 2020-11-23 22:53:15 +01:00
mxs uboot-envtools: mxs: add support for olimex, imx23-olinuxino 2020-03-08 15:10:55 +01:00
oxnas uboot-envtools: fix fw_env.config for ox820/stg-212 2019-04-11 19:21:55 +02:00
pistachio pistachio: remove custom board detection override 2017-03-22 11:43:22 +01:00
ramips uboot-envtools: support Xiaomi Mi Router 3G v2/4A Gigabit 2020-11-12 17:18:26 +01:00
uboot-envtools.sh uboot-envtools: check for config prior to append 2019-12-17 19:35:16 +02:00