mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
c07d3302b3
This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
10 lines
556 B
Plaintext
10 lines
556 B
Plaintext
fdtaddr=0x8f000000
|
|
loadaddr=0x81000000
|
|
fdt_high=0xffffffffffffffff
|
|
initrd_high=0xffffffffffffffff
|
|
hwconfig=fsl_ddr:bank_intlv=auto
|
|
qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
|
|
bootargs=ubi.mtd=9 root=ubi0:rootfs rw rootfstype=ubifs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.quadspi:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(ubifs)
|
|
bootcmd=echo starting openwrt ...;run qspi_boot
|
|
bootdelay=3
|