mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-27 06:39:51 +00:00
3a5584e0df
Adds latest 6.6 patches from the Raspberry Pi repository. These patches were generated from: https://github.com/raspberrypi/linux/commits/rpi-6.6.y/ With the following command: git format-patch -N v6.6.67..HEAD (HEAD -> 811ff707533bcd67cdcd368bbd46223082009b12) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 692205305db14deeff1a2dc4a6d7f87e19fc418b)
119 lines
3.5 KiB
Diff
119 lines
3.5 KiB
Diff
From 0b76dec8dfba8c1a4793dff0c86bf73d088a812e Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Fri, 1 Nov 2024 09:12:01 +0000
|
|
Subject: [PATCH] dts: bcm2712-rpi: Add RP1 firmware and mailboxes
|
|
|
|
Declare the communications channel to RP1.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
.../boot/dts/broadcom/bcm2712-rpi-5-b.dts | 4 +--
|
|
.../boot/dts/broadcom/bcm2712-rpi-cm5.dtsi | 4 +--
|
|
arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi | 4 +++
|
|
arch/arm64/boot/dts/broadcom/rp1.dtsi | 27 +++++++++++++++++++
|
|
4 files changed, 35 insertions(+), 4 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
|
|
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
|
|
@@ -195,7 +195,7 @@ i2c_rp1boot: &_i2c3 { };
|
|
// This is the RP1 peripheral space
|
|
ranges = <0xc0 0x40000000
|
|
0x02000000 0x00 0x00000000
|
|
- 0x00 0x00400000>;
|
|
+ 0x00 0x00410000>;
|
|
|
|
dma-ranges =
|
|
// inbound RP1 1x_xxxxxxxx -> PCIe 1x_xxxxxxxx
|
|
@@ -207,7 +207,7 @@ i2c_rp1boot: &_i2c3 { };
|
|
// This allows the RP1 DMA controller to address RP1 hardware
|
|
<0xc0 0x40000000
|
|
0x02000000 0x0 0x00000000
|
|
- 0x0 0x00400000>,
|
|
+ 0x0 0x00410000>,
|
|
|
|
// inbound RP1 0x_xxxxxxxx -> PCIe 1x_xxxxxxxx
|
|
<0x00 0x00000000
|
|
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
|
|
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
|
|
@@ -176,7 +176,7 @@ i2c_rp1boot: &_i2c3 { };
|
|
// This is the RP1 peripheral space
|
|
ranges = <0xc0 0x40000000
|
|
0x02000000 0x00 0x00000000
|
|
- 0x00 0x00400000>;
|
|
+ 0x00 0x00410000>;
|
|
|
|
dma-ranges =
|
|
// inbound RP1 1x_xxxxxxxx -> PCIe 1x_xxxxxxxx
|
|
@@ -188,7 +188,7 @@ i2c_rp1boot: &_i2c3 { };
|
|
// This allows the RP1 DMA controller to address RP1 hardware
|
|
<0xc0 0x40000000
|
|
0x02000000 0x0 0x00000000
|
|
- 0x0 0x00400000>,
|
|
+ 0x0 0x00410000>,
|
|
|
|
// inbound RP1 0x_xxxxxxxx -> PCIe 1x_xxxxxxxx
|
|
<0x00 0x00000000
|
|
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi
|
|
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi
|
|
@@ -294,6 +294,10 @@ pciex4: &pcie2 { };
|
|
status = "okay";
|
|
};
|
|
|
|
+&rp1_mbox {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
/* Add some gpiomem nodes to make the devices accessible to userspace.
|
|
* /dev/gpiomem<n> should expose the registers for the interface with DT alias
|
|
* gpio<n>.
|
|
--- a/arch/arm64/boot/dts/broadcom/rp1.dtsi
|
|
+++ b/arch/arm64/boot/dts/broadcom/rp1.dtsi
|
|
@@ -13,6 +13,14 @@
|
|
|
|
// ranges and dma-ranges must be provided by the includer
|
|
|
|
+ rp1_mbox: mailbox@8000 {
|
|
+ compatible = "raspberrypi,rp1-mbox";
|
|
+ status = "disabled";
|
|
+ reg = <0xc0 0x40008000 0x0 0x4000>; // SYSCFG
|
|
+ interrupts = <RP1_INT_SYSCFG IRQ_TYPE_LEVEL_HIGH>;
|
|
+ #mbox-cells = <1>;
|
|
+ };
|
|
+
|
|
rp1_clocks: clocks@18000 {
|
|
compatible = "raspberrypi,rp1-clocks";
|
|
#clock-cells = <1>;
|
|
@@ -1183,6 +1191,19 @@
|
|
assigned-clocks = <&rp1_clocks RP1_CLK_DPI>;
|
|
assigned-clock-parents = <&rp1_clocks RP1_PLL_VIDEO>;
|
|
};
|
|
+
|
|
+ sram: sram@400000 {
|
|
+ compatible = "mmio-sram";
|
|
+ reg = <0xc0 0x40400000 0x0 0x10000>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges = <0 0xc0 0x40400000 0x10000>;
|
|
+
|
|
+ rp1_fw_shmem: shmem@ff00 {
|
|
+ compatible = "raspberrypi,rp1-shmem";
|
|
+ reg = <0xff00 0x100>; // firmware mailbox buffer
|
|
+ };
|
|
+ };
|
|
};
|
|
};
|
|
|
|
@@ -1281,6 +1302,12 @@
|
|
};
|
|
|
|
/ {
|
|
+ rp1_firmware: rp1_firmware {
|
|
+ compatible = "raspberrypi,rp1-firmware", "simple-mfd";
|
|
+ mboxes = <&rp1_mbox 0>;
|
|
+ shmem = <&rp1_fw_shmem>;
|
|
+ };
|
|
+
|
|
rp1_vdd_3v3: rp1_vdd_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd-3v3";
|