Kyle Hendry 1a69543376 bmips: add support for SmartRG SR505n ... Specifications: - SoC: Broadcom BCM63168 dual 400MHz MIPS - Flash: 16MB SPI NOR W25Q128WFG - RAM: 128MB DDR3 W631GG6KB-15 - Ethernet: 1x 1000M, 3x 100M - Wifi: BCM435F - 1x USB 2.0 port - 3x Button - 12x LED Flashing via serial - Connect to the 3.3V TTL UART on the board (J6 pinout Vcc Rx Tx Gnd) at 115200-8-N-1 - Press any key in the serial console when powering up the board to enter the CFE prompt - Configure an interface on your workstation to static IP 192.168.1.100 and connect it to the board - Start a TFTP server with the firmware image - On the CFE prompt, enter the command "f 192.168.1.100:openwrt-bmips-bcm63268-smartrg_sr505n-squashfs-cfe.bin" Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com> [Remove unneeded LED labels] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>		2024-03-10 20:26:07 +01:00
..
lzma-loader	bmips: add new target	2021-02-22 18:29:44 +01:00
bcm6318.mk	bmips: switch to generic bcma/ssb fallback SPROM	2023-04-23 12:18:35 +02:00
bcm6328.mk	bmips: bcm6328: add Innacomm W3400V6	2024-01-16 10:49:27 +01:00
bcm6358.mk	bmips: add subtargets for each SoC	2023-04-10 10:04:08 +02:00
bcm6362.mk	bmips: dgnd3700v2: add b43 wireless driver	2023-04-23 12:19:02 +02:00
bcm6368.mk	bmips: add support for Actiontec R1000H	2023-06-15 17:58:58 +02:00
bcm63268.mk	bmips: add support for SmartRG SR505n	2024-03-10 20:26:07 +01:00
Makefile	bmips: bump LOADER_ENTRY to RAM + 16M	2023-06-15 20:47:40 +02:00