mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
5596452cd4
With this change the LED subsystem is abused in the kernel to switch the simswap. This change will be reverted, so we could use again the gpio subsystem. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
57 lines
2.2 KiB
Diff
57 lines
2.2 KiB
Diff
From 8c9254d41881c81bea610193c6ac59c8cb8b79fe Mon Sep 17 00:00:00 2001
|
|
From: Florian Eckert <fe@dev.tdt.de>
|
|
Date: Fri, 27 Mar 2020 16:11:55 +0100
|
|
Subject: [PATCH] Revert "platform/x86: pcengines-apuv2: wire up simswitch gpio
|
|
as led"
|
|
|
|
This reverts commit 5037d4ddda31c2dbbb018109655f61054b1756dc.
|
|
|
|
Commit message from linux:
|
|
The APU3+ boards have two SIM sockets, while only one of them
|
|
can be routed to the mpcie slots at a time. Selection is done
|
|
via simswap gpio.
|
|
|
|
We currently don't have a fitting subsystem for those cases yet,
|
|
so just wire it up to a LED for the time being. While this isn't
|
|
really semantically correct, it's a good compromise.
|
|
|
|
Explanation why this does not work:
|
|
This change connects the simswap to the LED subsystem of the kernel.
|
|
From my point of view, it's nonsense. If we do it this way, then this
|
|
can be switched relatively easily via the LED subsystem (trigger:
|
|
none/default-on) and that is dangerous! If this is used, it would be
|
|
unfavorable, since there is also another trigger (trigger: heartbeat/netdev).
|
|
This LED also appears in the LuCI and can therefore be switched by the user.
|
|
|
|
Therefore, this simswap GPIO should remain in the GPIO
|
|
subsystem and be switched via it and not be connected to the LED
|
|
subsystem. To avoid the problems mentioned above. The LED subsystem is
|
|
not made for this and it is not a good compromise, but rather dangerous.
|
|
|
|
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
|
|
---
|
|
drivers/platform/x86/pcengines-apuv2.c | 5 +----
|
|
1 file changed, 1 insertion(+), 4 deletions(-)
|
|
|
|
--- a/drivers/platform/x86/pcengines-apuv2.c
|
|
+++ b/drivers/platform/x86/pcengines-apuv2.c
|
|
@@ -77,8 +77,7 @@ static const struct amd_fch_gpio_pdata b
|
|
static const struct gpio_led apu2_leds[] = {
|
|
{ .name = "apu:green:1" },
|
|
{ .name = "apu:green:2" },
|
|
- { .name = "apu:green:3" },
|
|
- { .name = "apu:simswap" },
|
|
+ { .name = "apu:green:3" }
|
|
};
|
|
|
|
static const struct gpio_led_platform_data apu2_leds_pdata = {
|
|
@@ -95,8 +94,6 @@ static struct gpiod_lookup_table gpios_l
|
|
NULL, 1, GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_LED3,
|
|
NULL, 2, GPIO_ACTIVE_LOW),
|
|
- GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_SIMSWAP,
|
|
- NULL, 3, GPIO_ACTIVE_LOW),
|
|
}
|
|
};
|
|
|