mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
95b0751d0f
This pci@40000000 node from upstream was dropped when the device
was converted from local DTS(I) files to kernel patches in [1] to
ensure that change was purely cosmetic.
However, the DK04.1 has a PCI-E slot by default, so let's keep
(i.e. not remove) the kernel definition now.
[1] c4beac9ea2 ("ipq40xx: use upstream DTS files for IPQ4019/AP-DK04.1")
Suggested-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
168 lines
3.2 KiB
Diff
168 lines
3.2 KiB
Diff
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
|
|
@@ -17,53 +17,79 @@
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
- memory {
|
|
- device_type = "memory";
|
|
- reg = <0x80000000 0x10000000>; /* 256MB */
|
|
- };
|
|
-
|
|
soc {
|
|
+ rng@22000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
pinctrl@1000000 {
|
|
serial_0_pins: serial0-pinmux {
|
|
- pins = "gpio16", "gpio17";
|
|
- function = "blsp_uart0";
|
|
- bias-disable;
|
|
+ mux {
|
|
+ pins = "gpio16", "gpio17";
|
|
+ function = "blsp_uart0";
|
|
+ bias-disable;
|
|
+ };
|
|
};
|
|
|
|
serial_1_pins: serial1-pinmux {
|
|
- pins = "gpio8", "gpio9",
|
|
- "gpio10", "gpio11";
|
|
- function = "blsp_uart1";
|
|
- bias-disable;
|
|
+ mux {
|
|
+ pins = "gpio8", "gpio9";
|
|
+ function = "blsp_uart1";
|
|
+ bias-disable;
|
|
+ };
|
|
};
|
|
|
|
spi_0_pins: spi-0-pinmux {
|
|
pinmux {
|
|
function = "blsp_spi0";
|
|
pins = "gpio13", "gpio14", "gpio15";
|
|
- bias-disable;
|
|
};
|
|
pinmux_cs {
|
|
function = "gpio";
|
|
pins = "gpio12";
|
|
+ };
|
|
+ pinconf {
|
|
+ pins = "gpio13", "gpio14", "gpio15";
|
|
+ drive-strength = <12>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ pinconf_cs {
|
|
+ pins = "gpio12";
|
|
+ drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
i2c_0_pins: i2c-0-pinmux {
|
|
- pins = "gpio20", "gpio21";
|
|
- function = "blsp_i2c0";
|
|
- bias-disable;
|
|
+ pinmux {
|
|
+ function = "blsp_i2c0";
|
|
+ pins = "gpio10", "gpio11";
|
|
+ };
|
|
+ pinconf {
|
|
+ pins = "gpio10", "gpio11";
|
|
+ drive-strength = <16>;
|
|
+ bias-disable;
|
|
+ };
|
|
};
|
|
|
|
nand_pins: nand-pins {
|
|
- pins = "gpio53", "gpio55", "gpio56",
|
|
- "gpio57", "gpio58", "gpio59",
|
|
- "gpio60", "gpio62", "gpio63",
|
|
- "gpio64", "gpio65", "gpio66",
|
|
- "gpio67", "gpio68", "gpio69";
|
|
- function = "qpic";
|
|
+ pullups {
|
|
+ pins = "gpio52", "gpio53", "gpio58",
|
|
+ "gpio59";
|
|
+ function = "qpic";
|
|
+ bias-pull-up;
|
|
+ };
|
|
+
|
|
+ pulldowns {
|
|
+ pins = "gpio54", "gpio55", "gpio56",
|
|
+ "gpio57", "gpio60", "gpio61",
|
|
+ "gpio62", "gpio63", "gpio64",
|
|
+ "gpio65", "gpio66", "gpio67",
|
|
+ "gpio68", "gpio69";
|
|
+ function = "qpic";
|
|
+ bias-pull-down;
|
|
+ };
|
|
};
|
|
};
|
|
|
|
@@ -89,11 +115,11 @@
|
|
status = "ok";
|
|
cs-gpios = <&tlmm 12 0>;
|
|
|
|
- m25p80@0 {
|
|
+ mx25l25635e@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
- compatible = "n25q128a11";
|
|
+ compatible = "mx25l25635e";
|
|
spi-max-frequency = <24000000>;
|
|
};
|
|
};
|
|
@@ -103,9 +129,48 @@
|
|
perst-gpio = <&tlmm 38 0x1>;
|
|
};
|
|
|
|
+ i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
|
|
+ pinctrl-0 = <&i2c_0_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
qpic-nand@79b0000 {
|
|
pinctrl-0 = <&nand_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
+
|
|
+ usb3_ss_phy: ssphy@9a000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb3_hs_phy: hsphy@a6000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb3: usb3@8af8800 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb2_hs_phy: hsphy@a8000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb2: usb2@60f8800 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ cryptobam: dma@8e04000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ crypto@8e3a000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ watchdog@b017000 {
|
|
+ status = "okay";
|
|
+ };
|
|
};
|
|
};
|