Rafał Miłecki cc51d97200 bcm4908: enable Netgear R8000P bootloader image ... This enables building BCM4908 "raw" image that can be flashed using bootloader web UI. It requires serial console access & stopping booting by the "Press any key to stop auto run". It's easy to build vendor like CHK image but it can't be safely flashed using vendor UI at this point. Netgear implements method called "NAND incremental flashing" that doesn't seem to flash bootfs partition as provided. Above method seems to update vmlinux.lz without updating 94908.dtb. It prevents OpenWrt kernel from booting due to incomplete DTB file. Full Netgear R8000P support can be enabled after finding a way to make vendor firmware flash OpenWrt firmware including the 94908.dtb update. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d92a9c97bf)		2021-04-08 13:16:14 +02:00
..
asus_gt-ac5300/rom/etc	bcm4908: build flashable & bootable firmware images	2021-01-21 13:18:42 +01:00
netgear_r8000p/etc	bcm4908: build flashable & bootable firmware images	2021-01-21 13:18:42 +01:00
tplink_archer-c2300-v1	bcm4908: prepare to support TP-Link Archer C2300 V1	2021-03-17 21:23:46 +01:00
Makefile	bcm4908: enable Netgear R8000P bootloader image	2021-04-08 13:16:14 +02:00