mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
9f3f61a0d9
Adds support for the Turris Omnia and builds an eMMC sysupgrade image in the same format as the SolidRun ClearFog. An initramfs image in the simple yet Omnia-specific 'medkit' image format is also built in order to ease the initial flashing process. Notable hardware support omissions are support for switching between SFP cage and copper PHY, and RGB LED control. Due to a current limitation of DSA, only 1/2 CPU switch uplinks are used. Specifications: - Marvell Armada 385 1.6GHz dual-core ARMv7 CPU - 1GB DDR3 RAM - 8GB eMMC Flash - 5x Gigabit LAN via Marvell 88E6176 Switch (2x RGMII CPU ports) - 1x switchable RJ45 (88E1514 PHY) / SFP SGMII WAN - 2x USB 3.0 - 12x dimmable RGB LEDs controlled by independent MCU - 3x Mini PCIe slots - Optional Compex WLE200N2 Mini PCIe AR9287 2x2 802.11b/g/n (2.4GHz) - Optional Compex WLE900VX Mini PCIe QCA9880 3x3 802.11ac (2.4 / 5GHz) - Optional Quectel EC20 Mini PCIe LTE modem Flash instructions: If the U-Boot environment has been modified previously (likely manually via serial console), first use serial to reset the default environment. => env default -a => saveenv Method 1 - USB 'medkit' image w/o serial - Copy openwrt-mvebu-turris-omnia-sysupgrade.img.gz and omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz to the root of a USB flash drive formatted with FAT32 / ext2/3/4 / btrfs / XFS. Note that the medkit MUST be named omnia-medkit*.tar.gz - Disconnect other USB devices from the Omnia and connect the flash drive to either USB port. - Power on the Omnia and hold down the rear reset button until 4 LEDs are illuminated, then release. - Wait approximately 2 minutes for the Turris Omnia to flash itself with the temporary image, during which LEDs will change multiple times. - Connect a computer to a LAN port of the Turris Omnia with a DHCP client - (if necessary) ssh-keygen -R 192.168.1.1 - ssh root@192.168.1.1 $ mount /dev/sda1 /mnt $ sysupgrade /mnt/openwrt-mvebu-turris-omnia-sysupgrade.img.gz - Wait another minute for the final OpenWrt image to be flashed. The Turris Omnia will reboot itself and you can remove the flash drive. Method 2 - TFTP w/ serial - Extract omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz and copy dtb + zImage to your TFTP server (rename if desired) - Connect Turris Omnia WAN port to DHCP-enabled network with TFTP server - Connect serial console and interrupt U-Boot => dhcp => setenv serverip <tftp_server_ip_here> => tftpboot 0x01000000 zImage => tftpboot 0x02000000 dtb => bootz 0x01000000 - 0x02000000 - OpenWrt will now boot from ramdisk - Download openwrt-mvebu-turris-omnia-sysupgrade.img.gz to /tmp/ $ sysupgrade /tmp/openwrt-mvebu-turris-omnia-sysupgrade.img.gz - Wait another minute for the final OpenWrt image to be flashed. The Turris Omnia will reboot itself. Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
77 lines
1.6 KiB
Bash
Executable File
77 lines
1.6 KiB
Bash
Executable File
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2013-2015 OpenWrt.org
|
|
# Copyright (C) 2016 LEDE-Project.org
|
|
#
|
|
|
|
MVEBU_BOARD_NAME=
|
|
MVEBU_MODEL=
|
|
|
|
mvebu_board_detect() {
|
|
local machine
|
|
local name
|
|
|
|
machine=$(cat /proc/device-tree/model)
|
|
|
|
case "$machine" in
|
|
*"Marvell Armada 370 Evaluation Board")
|
|
name="armada-370-db"
|
|
;;
|
|
*"Globalscale Mirabox")
|
|
name="mirabox"
|
|
;;
|
|
*"Marvell Armada 370 Reference Design")
|
|
name="armada-370-rd"
|
|
;;
|
|
*"Marvell Armada XP Evaluation Board")
|
|
name="armada-xp-db"
|
|
;;
|
|
*"PlatHome OpenBlocks AX3-4 board")
|
|
name="openblocks-ax3-4"
|
|
;;
|
|
*"Marvell Armada XP GP Board")
|
|
name="armada-xp-gp"
|
|
;;
|
|
*"Linksys WRT1200AC")
|
|
name="armada-385-linksys-caiman"
|
|
;;
|
|
*"Linksys WRT1900AC")
|
|
name="armada-xp-linksys-mamba"
|
|
;;
|
|
*"Linksys WRT1900ACv2")
|
|
name="armada-385-linksys-cobra"
|
|
;;
|
|
*"Linksys WRT1900ACS")
|
|
name="armada-385-linksys-shelby"
|
|
;;
|
|
*"Linksys WRT3200ACM")
|
|
name="armada-385-linksys-rango"
|
|
;;
|
|
*"Marvell Armada 385 Access Point Development Board")
|
|
name="armada-385-db-ap"
|
|
;;
|
|
*"Marvell Armada XP Development Board DB-MV784MP-GP")
|
|
name="armada-xp-gp"
|
|
;;
|
|
*"SolidRun Clearfog Pro A1")
|
|
name="armada-388-clearfog-pro"
|
|
;;
|
|
*"SolidRun Clearfog Base A1")
|
|
name="armada-388-clearfog-base"
|
|
;;
|
|
*"Turris Omnia")
|
|
name="armada-385-turris-omnia"
|
|
;;
|
|
esac
|
|
|
|
[ -z "$name" ] && name="unknown"
|
|
|
|
[ -z "$MVEBU_BOARD_NAME" ] && MVEBU_BOARD_NAME="$name"
|
|
[ -z "$MVEBU_MODEL" ] && MVEBU_MODEL="$machine"
|
|
|
|
[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
|
|
|
|
echo "$MVEBU_BOARD_NAME" > /tmp/sysinfo/board_name
|
|
echo "$MVEBU_MODEL" > /tmp/sysinfo/model
|
|
}
|