openwrt/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi
Dmitry Tunin ae9c3105a3 ath79: use both WNDR3x00 power leds for boot status indication
Use the orange led by default to match the bootloader/stock firmware
behaviour. Turn on the green power led after boot to indicate a
finished boot and the orange one off.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
[reword commit message, keep orange power led enabled during early
kernel boot]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-15 07:42:36 +02:00

223 lines
3.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
aliases {
led-boot = &power_orange;
led-failsafe = &power_orange;
led-running = &power_green;
led-upgrade = &power_orange;
};
chosen {
bootargs = "console=ttyS0,115200";
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
reset-leds {
compatible = "reset-leds";
usb_led {
label = "netgear:green:usb";
resets = <&rst 12>;
trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
linux,default-trigger = "usbport";
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "netgear:orange:wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
power_green: power_green {
label = "netgear:green:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
power_orange: power_orange {
label = "netgear:orange:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps_green {
label = "netgear:green:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan_green {
label = "netgear:green:wan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan2g {
label = "netgear:green:wlan2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "netgear:blue:wlan5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "rfkill";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
phy-mask = <0x10>;
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
};
};
&usb_phy {
status = "okay";
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_ochi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb2 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_echi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 {
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0x10000>;
mtd-mac-address = <&art 0x0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 {
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0x10000>;
mtd-mac-address = <&art 0xc>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
};
&eth0 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
mtd-mac-address = <&art 0x00>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
mtd-mac-address = <&art 0x06>;
phy-handle = <&phy4>;
};