openwrt/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch
Ram Chandra Jangir d805812e75 ipq806x: add kernel 4.14 support
- Rebased the patches for 4.14
 - Dropped spi-qup and 0027, 0028, 0029
   clk patches since it's already included
   in upstream.

 Tested on IPQ AP148 Board:
  1) NOR boot and NAND boot
  2) Tested USB and PCIe interfaces
  3) WDOG test
  4) cpu frequency scaling
  5) ethernet, 2G and 5G WiFi
  6) ubi sysupgrade

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
(cherry picked from commit 93dd2f7211)
2018-05-24 17:24:31 +02:00

178 lines
5.6 KiB
Diff

From: Christian Lamparter <chunkeey@googlemail.com>
Subject: SoC: add qualcomm syscon
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st
obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -78,6 +78,13 @@ config QCOM_SMSM
Say yes here to support the Qualcomm Shared Memory State Machine.
The state machine is represented by bits in shared memory.
+config QCOM_TCSR
+ tristate "QCOM Top Control and Status Registers"
+ depends on ARCH_QCOM
+ help
+ Say y here to enable TCSR support. The TCSR provides control
+ functions for various peripherals.
+
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM
--- /dev/null
+++ b/drivers/soc/qcom/qcom_tcsr.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License rev 2 and
+ * only rev 2 as published by the free Software foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define TCSR_USB_PORT_SEL 0xb0
+#define TCSR_USB_HSPHY_CONFIG 0xC
+
+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0
+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf
+
+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0
+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4
+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4
+
+static int tcsr_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ const struct device_node *node = pdev->dev.of_node;
+ void __iomem *base;
+ u32 val;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
+ dev_err(&pdev->dev, "setting usb port select = %d\n", val);
+ writel(val, base + TCSR_USB_PORT_SEL);
+ }
+
+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) {
+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val);
+ writel(val, base + TCSR_USB_HSPHY_CONFIG);
+ }
+
+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) {
+ u32 tmp = 0;
+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val);
+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET);
+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK);
+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK);
+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET);
+ }
+
+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) {
+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val);
+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET);
+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET);
+ }
+
+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) {
+ dev_info(&pdev->dev,
+ "setting wifi_noc_memtype_m0_m2 = %x\n", val);
+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id tcsr_dt_match[] = {
+ { .compatible = "qcom,tcsr", },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, tcsr_dt_match);
+
+static struct platform_driver tcsr_driver = {
+ .driver = {
+ .name = "tcsr",
+ .owner = THIS_MODULE,
+ .of_match_table = tcsr_dt_match,
+ },
+ .probe = tcsr_probe,
+};
+
+module_platform_driver(tcsr_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM TCSR driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,tcsr.h
@@ -0,0 +1,48 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_QCOM_TCSR_H
+#define __DT_BINDINGS_QCOM_TCSR_H
+
+#define TCSR_USB_SELECT_USB3_P0 0x1
+#define TCSR_USB_SELECT_USB3_P1 0x2
+#define TCSR_USB_SELECT_USB3_DUAL 0x3
+
+/* IPQ40xx HS PHY Mode Select */
+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7
+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7
+
+/* IPQ40xx ess interface mode select */
+#define TCSR_ESS_PSGMII 0
+#define TCSR_ESS_PSGMII_RGMII5 1
+#define TCSR_ESS_PSGMII_RMII0 2
+#define TCSR_ESS_PSGMII_RMII1 4
+#define TCSR_ESS_PSGMII_RMII0_RMII1 6
+#define TCSR_ESS_PSGMII_RGMII4 9
+
+/*
+ * IPQ40xx WiFi Global Config
+ * Bit 30:AXID_EN
+ * Enable AXI master bus Axid translating to confirm all txn submitted by order
+ * Bit 24: Use locally generated socslv_wxi_bvalid
+ * 1: use locally generate socslv_wxi_bvalid for performance.
+ * 0: use SNOC socslv_wxi_bvalid.
+ */
+#define TCSR_WIFI_GLB_CFG 0x41000000
+
+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */
+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222
+
+/* TCSR A/B REG */
+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0
+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1
+
+#endif