openwrt/target/linux/ramips/dts/mt7621_alfa-network_quad-e4g.dts
Adrian Schmutzler e4ce3109f2 ramips: simplify state_default/pinctrl0 in device DTS files
The node pinctrl0 is already set up in the SOC DTSI files, but
defined again as member of pinctrl in most of the device DTS(I)
files. This patch removes this redundancy for the entire ramips
target.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-23 02:24:55 +01:00

231 lines
4.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "alfa-network,quad-e4g", "mediatek,mt7621-soc";
model = "ALFA Network Quad-E4G";
aliases {
label-mac-device = &ethernet;
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
m2-enable {
gpio-export,name = "m2-enable";
gpio-export,output = <1>;
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
};
minipcie0-enable {
gpio-export,name = "minipcie0-enable";
gpio-export,output = <1>;
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
minipcie0-reset {
gpio-export,name = "minipcie0-reset";
gpio-export,output = <0>;
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
};
minipcie1-enable {
gpio-export,name = "minipcie1-enable";
gpio-export,output = <1>;
gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
};
minipcie1-reset {
gpio-export,name = "minipcie1-reset";
gpio-export,output = <0>;
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
minipcie2-enable {
gpio-export,name = "minipcie2-enable";
gpio-export,output = <1>;
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
};
minipcie2-reset {
gpio-export,name = "minipcie2-reset";
gpio-export,output = <0>;
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
};
pcie-perst-disable {
gpio-export,name = "pcie-perst-enable";
gpio-export,output = <0>;
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
sim-select {
gpio-export,name = "sim-select";
gpio-export,output = <1>;
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
};
watchdog-enable {
gpio-export,name = "watchdog-enable";
gpio-export,output = <1>;
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
user1 {
label = "user1";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
user2 {
label = "user2";
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "quad-e4g:red:system";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
m2 {
label = "quad-e4g:orange:m2";
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
minipcie0 {
label = "quad-e4g:orange:minipcie0";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
};
minipcie1 {
label = "quad-e4g:orange:minipcie1";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
minipcie2 {
label = "quad-e4g:orange:minipcie2";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
hw_algo = "toggle";
hw_margin_ms = <25000>;
always-running;
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&i2c {
status = "okay";
rtc@68 {
compatible = "ti,bq32000";
reg = <0x68>;
};
};
&pcie {
status = "okay";
};
&state_default {
gpio {
ralink,group = "jtag", "rgmii2", "wdt";
ralink,function = "gpio";
};
};
&sdhci {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x1000>;
};
partition@31000 {
label = "config";
reg = <0x31000 0xf000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&uartlite2 {
status = "okay";
};
&uartlite3 {
status = "okay";
};