openwrt/target/linux/ath79/dts/ar7241_netgear_wnr2000-v3.dts
Adrian Schmutzler 41cc7edc15 ath79: move dts-v1 statement to ath79.dtsi
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

In ath79, we therefore requested to have in the DTS files so far,
and omit it in the DTSI files. However, essentially the syntax of
the parent ath79.dtsi file already determines the DTS version, so
putting it into the DTS files is just a useless repetition.

Consequently, this patch puts the dts-v1 statement into the parent
ath79.dtsi, which is (indirectly) included by all DTS files. All
other occurences are removed.
Since the dts-v1 statement needs to be before any other definitions,
this also moves the includes to make sure the ath79.dtsi or its
descendants are always included first.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-25 23:26:34 +02:00

207 lines
3.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7241.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,wnr2000-v3", "qca,ar7241";
model = "Netgear WNR2000 v3";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_power_amber;
led-failsafe = &led_power_amber;
led-running = &led_power_green;
led-upgrade = &led_power_amber;
label-mac-device = &eth1;
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
ath9k-keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&ath9k 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
rfkill {
label = "rfkill";
linux,code = <KEY_RFKILL>;
gpios = <&ath9k 9 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
wan_green {
label = "netgear:green:wan";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
wan_amber {
label = "netgear:amber:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
lan1_green {
label = "netgear:green:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan1_amber {
label = "netgear:amber:lan1";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
lan2_green {
label = "netgear:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan2_amber {
label = "netgear:amber:lan2";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
lan3_green {
label = "netgear:green:lan3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan3_amber {
label = "netgear:amber:lan3";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
lan4_green {
label = "netgear:green:lan4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
lan4_amber {
label = "netgear:amber:lan4";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wps_green {
label = "netgear:green:wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
led_power_green: power_green {
label = "netgear:green:power";
gpios = <&ath9k 3 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
label = "netgear:amber:power";
gpios = <&ath9k 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wlan_blue {
label = "netgear:blue:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3a0000>;
compatible = "netgear,uimage";
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&eth1 {
compatible = "qca,ar7241-eth", "syscon", "simple-mfd";
mtd-mac-address = <&art 0x6>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002e";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};